Manhattan Comfort Liberty 70.86 Floating Entertainment Center User manual

Ed. 001, 2020/05 - Manhattan Comfort.
888-230-2225
[e-mail]
44
lb
The indicated values consider static weights and evenly distributed over the parts.
8
lb
Liberty 70.86 Floating
Entertainment Center
Model # 235BMC6, 235BMC8, 235BMC9
22
lb
8
lb
8
lb
8
lb

n.° ID Parts Identification (Description) Quantity
REAR VIEW
1
1
2
1
1
01
04
06
02
05
03
1
2
INCLUDED IN THE PACKAGE
Lower Panel
Rear Column
Middle Panel
Rear Bar
Lower Shelf
Middle Shelf
07
08
09
10
11
2
Side Panel
2
Partition
01
06
13
For fixing
behind the panel
For fixing
on the wall
1
Upper Panel
2
Left/Right Panel
Tilting Door
1
Upper Shelf
12
1
Bar for wall
13
2
02
03
04
04
05
05
07
08
08
09
09
10
10
11
12
07
08
11
01
02
03
04
04

3
TOOLS NEEDED
Simple hammer.Flat head and phillips
screwdriver.
Electric drill and electric screwdriver with
drill bit Ø1/2 inch and phillips tips.
Level indicator.
!IMPORTANT! Two people are recommended to assemble and install this product.
INCLUDED IN THE HARDWARE
6x
A2x B27x
C
18x
D36x E5x (main color) F
22x
G8x
H8x I
J4x K16x L
8x (secondary color)
M20x N2x
O
2x
P4x

STEP 2
4
DETAIL 1
• Line the floor with the foam mantle of the
packing to protect the parts and arrange
the Panels (01), (02), (03) and (04)
with the rear face upwards, correctly
checking the position of each as
holes and as the drawing.
ATTENTION!
APPLY GLUE.
02
01
Rear face
Rear face
STEP 1
LOWER EDGE
06
• Align the edges of the Panels (01),
(02), (03) and (04) and fix them
together by applying the steel plates (D)
with bolts 3.5 x 12mm (E), as DETAIL 1
and in the indicated positions.
• Fasten the Rear Bar (06) by positioning it
behind the Panels (02) and (03) and
applying glue (B), dowels Ø6 x 20mm (A)
and the indicated bolts 4.5 x 25mm (C).
03
Rear face
04
Rear face
04
Rear face
STEP 3
• Fasten the Rear Columns (05) in the Left and
Right Panels (04) by positioning them behind
the panels with dowels Ø6 x 20mm (A) and
applying bolts 4.5 x 25mm (C).
05
04
05
04
06
01
Rear face
02
Rear face
03
Rear face
Preparing the Doors (10):
• Fix the hinges (K) on the Doors
(10) with bolts 4.0 x 14mm (L),
as shown in DETAIL 2.
• Insert the plastic ring (M) in
the Doors (10).
DETAIL 2
10 10

STEP 4
5
STEP 5
• Connect the Side Panel (08) and the Partitions (09) in the Base (07)
with dowels (G) and cam lock hardware (H+I).
• Fix the hinge connectors (K) of the Doors (10) on the Base (07) with
bolts (L), taking the markings on the Base (07) as a reference for
correct positioning. The hinge connector includes two bolts, shown in
the DETAIL 3. Use these fixer and adjustment bolts to tighten, adjust
and align the doors.
• Connect the Middle Shelf (11) on the Side Panels (08) and on the
Partitions (09) with dowels (G) and cam lock hardware (H+I).
• At the end, apply the adhesive covers (J).
07
08
11
09
09
08
10
10
Adjustment
bolt
Fixer
bolt
DETAIL 3
• Install the Upper Shelf (12)
fitting it with dowels (G) and
fastening it with bolts (N) to
the Upper Panel (03).
• Finish fixing the Rear Bar (06)
to the Middle Panel (02) and
to the Upper Panel (03)
applying the four bolts (C)
shown in the drawing and
then the adhesive covers (F).
• Install the set of parts (07),
(08), (09), (10) and (11)
assembled in STEP 4, fitting
the Base (07) and the Middle
Shelf (11) in the Lower Panel
(01) with dowels (G) and
fastening them to the
Lower Panel (01) and to the
Left and Right Panels (04)
with bolts 5.0 x 50mm (N).
01
02
03
12
06
Fixed
behind
the panel.
10
10
08
09
09
04
11
04
07