Manhattan 515016 User manual

FIREWIRE 400
EXPRESSCARD/34
USER
MANUAL
Model 515016
MAN-515016-UM-1106-04

2
Thank you for purchasing the MANHATTAN®FireWire 400 ExpressCard/34,
Model 515016.
Compliant with PCI Express 1.0a and IEEE1394a specications, this card
supports FireWire 400 data transfer rates of 400, 200 and 100 Mbps and
has built-in FIFOs for isochronous transmit (2048 bytes), asynchronous
transmit (2048 bytes) and receive (3072 bytes), plus a convenient, built-
in DC jack provides direct power to operate external FireWire devices
(adapter not included).
Installation of the card is quick and simple, so you’ll soon be enjoying
the benets of these additional features:
• Fits ExpressCard/34 and ExpressCard/54 slots
• Built-in DC jack provides direct power to external FireWire devices
• Plug and Play installation; hot-swappable — Windows compatible
• Lifetime Warranty
System Requirements
• Windows 2000/XP/Vista/7 or MAC OS 10 or above
• PCI Express-enabled system with an available ExpressCard slot
HARDWARE INSTALLATION
Below are basic installation steps. Because system designs vary, refer to
your system’s manual for additional information if needed. NOTE: When
using an external power adapter (not included), make sure it’s 12 V DC /
1 A.
1. Turn off your notebook computer.
2. Insert the FireWire 400 ExpressCard/34 in
the ExpressCard slot, checking that the
card is making a solid connection.
3. Turn on your notebook
computer.
2 FireWire 400 ports
Power
adapter jack
(adapter not
included)

DRIVER INSTALLATION
1. Insert the FireWire 400 ExpressCard/34 into an available ExpressCard
slot on your notebook computer.
2. When the wizard indicates that it found a driver for the device, click
“Next.”
3. The wizard will now copy the required les to the system and start the
driver. After starting the driver, the wizard will display a completion
dialog. Click “Finish” to exit the wizard.
Verifying Driver Installation
1. Right click on “My Computer,” select “Properties,” left click on the
“Hardware” tab, then click on the “Device Manager” button.
2. Double-click “IEEE 1394 Bus Host Controllers.” If there is no yellow
“!” or “?” in front of “Texas Instruments OHCI Compliant IEEE 1394
Host Controller,” the driver has started correctly.
3. To view information about the devices attached to the controller, right-
click on “Devices,” select “Properties” from the context menu, then
select the tab labeled “General.”
SPECIFICATIONS
3 3
Ports
• 2 FireWire 400 ports; 6-pin
female connector
• FireWire 400 devices data
transfer rates of 400 Mbps, 200
Mbps & 100 Mbps (IEEE 1394)
• Texas Instruments chipset
• Single 3.3 V or 1.5 V operation
• Compliant with PCI specication
Rev 2.2 (32-bit, 33 MHz), IEEE1394a
OHCI specications release 1.1
and IEEE Std 1394a-2000
• Built-in FIFO for isochronous
transmit (2048 bytes),
asynchronous transmit (2048
bytes) and receive (3072 bytes)
• 12 V / 1 A DC power jack, 1.3 mm
(power adapter not included)
Bus
• PCI ExpressCard/34
• Texas Instruments chipset
• Bus speed 2.5 Gbps
• Fully compliant with PCI Express
specications 1.0a
Package Contents
• FireWire 400 ExpressCard/34
• User manual

Copyright © MANHATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.
www.manhattan-products.com
MANHATTAN®offers a complete line
of PC Components, Peripherals, Cables and Accessories.
Ask your local computer dealer for more information
or visit us online at