Manhattan 140034 User manual

SPECIFICATIONS
Socket LGA 1156 cPU cooLer USer MANUAL Model 140034
MANHATTAN®offers a complete line
of PC Components, Peripherals, Cables and Accessories.
Ask your local computer dealer for more information or visit us online at
www.manhattan-products.com
Thank you for purchasing this MANHATTAN®Socket LGA 1156 CPU Cooler, Model 140034. MANHATTAN CPU Coolers conduct and dissipate heat away from processors to reduce the risk of heat damage and help them operate at safe temperatures and peak levels. See the back of this sheet for Installation Instructions.
Copyright © MANHATTAN
All products mentioned are trademarks or registered trademarks
of their respective owners.
•Lightweight, rugged aluminum  heatsinkandcrotched-nconstruction provide effective thermal conductivity and dissipation •High-efciencyfandeliversquiet,reliablecooling •Helps protect Intel i5 750 and i7 860-870 processors from heat damage •Easy installation – ideal for new systems, upgrades and replacements •Lifetime Warranty
Heat sink •SupportsInteli5750andi7  860-870 •Aluminumconstruction Fan •Airow:47.62cfm,maximum •Fanspeed:2600rpm±10% •Noiselevel:<33dB •Ratedvoltage:12VDC
•Connector:3-pin;250mm  (9.8in.)powercable •Airpressure:2.54mmH2O,  maximum •Ratedvoltage:12VDC •Input(max.):current,0.24A Dimensions •Overall:95x65mm  (3.75x2.5in.)
•Heatsink:95x40mm  (3.75x1.5in.) •Fan:95x25mm(3.75x1in.) •Weight:400g(14.1oz.) Package contents •CPUCoolerwithaluminum  heatsinkandplate •Thermalpaste •Usermanual
MH-140034-UM-0110-02

INSTALLATION INSTRUCTIONS
1. Evenly spread thermal paste
(included) on the CPU core on
the circuit board.
NOTE: Some images may be representational of a full line of coolers with identical
installation procedures, and may not exactly match the appearance of any one model.
2. Set the cooler on the core,
aligning the four push-pins on
the cooler with the four holes
on the circuit board. Then
press down on each of the
push-pins so they snap
securely in place.
3. Connect the power cable of the
CPU Cooler to the circuit
board to complete the
installation.