Manhattan 709026 User manual

HI-SPEED USB
SATA 3.5”
DRIVE ENCLOSURE
USER MANUAL
Model 709026
MAN-709026-UM-0308-07

2
Hole for
screw on
each side
Thank you for purchasing the MANHATTAN®Hi-Speed USB SATA 3.5”
Drive Enclosure, Model 709026.
Supporting large-capacity 3.5” SATA drives up to 2 TB and Hi-Speed USB
data transfer rates of up to 480 MBps, this Drive Enclosure offers a
versatile and portable data solution.
Follow the easy installation procedure in this manual, and you’ll soon be
enjoying these additional features:
• Convenientone-touchcopyforeasydatatransfer
• Sturdycaseprotectsdriveandfacilitatescooling
• Rear-panelpowerswitchandLEDindicator
• Windows/Macintoshcompatible,PlugandPlay,hotswappable
• LifetimeWarranty
Package Contents
• DriveEnclosure
• USBcable,poweradapter,stand,installationhardware,screwdriver,
 softwareCDandusermanual
HARDWARE INSTALLATION
1.SettheLock/Unlockswitch
on the end panel to the
Unlock position.
2. Slide the cover of the Drive Enclosure off
the base.

3 3
3.Carefullyplaceyourharddriveinthe
base of the enclosure so a solid
connection is made with the
22-pin SATA connector.
4. Use the included screws
and screwdriver to secure
the hard drive in place (see
the image above), then slide the
cover of the enclosure back in place.
 Placethedeviceinthestand,ifdesired.
5. Use the included USB cable to connect the enclosure to your computer.
6. Use the included power adapter to connect the enclosure’s +12V jack to
a power source.
7. SettheOn/Off
switch to On when
 you’rereadytousethedevice.TheLEDsoneithercorneroftheend
 panelwilllighttoindicateeitherPower(top,asshownabove)orActivity.
NOTE: Also shown is the One-Touch Backup button (to the left of the
On/Offswitch),whichisexplainedinSoftwareInstallation.
OPTIONAL: Formatting a New Hard Drive
Ifyou’reusinganewharddrivewiththisdevice,youmayneedtoformatit
beforeinitialuse.Ifso,followtheprocedureabove,thencontinuewiththe
steps below. For more info on formatting drives, go to www.microsoft.com.
1. Onyourdesktop,gotoMyComputerandselect“Manager.”
2. WhentheComputerManagerscreendisplays,click“DiskManager”
in the left-side window.
3. Intheright-sidewindow,recognitionofthenewharddiskwillappear;
 forexample,“Seagate....”
4. Right-clickonthenewharddrivelisting,thenselect“Deletepartition.”
5. Right-clickonthenewharddrivelisting,thenselect“Newlogicaldrive.”
6. Right-clickonthenewharddrivelistingathirdtime,thenselect
 “Formatdiskdrive.”
7. ConrmthatthenewharddriveislistedintheMyComputerwindow,
indicating a proper formatting.

Removing the Drive Enclosure
Before you disconnect the device from your computer, follow these steps.
1. ClicktheCloneMeicononyourdesktop.(SeeDriverInstallationbelow.)
2. WhentheSafelyRemoveHardwarescreendisplays,click“Stop.”
3. Whenthe“ItisnowsafetoremovetheUSBdevice”messagedisplays,
disconnect the USB cable (and the power adapter, if connected).
DRIVER INSTALLATION
Once the enclosure is connected to your computer, your system will
automaticallydetectthenewhardwareandcompletethesetup,conrmed
whentherepresentativeCloneMeiconappearsinyoursystemstray.
SOFTWARE INSTALLATION
These steps are for the installation of the convenient One-Touch Backup
software. NOTE: This software doesn’t support Mac operating
systems. Someimagesaremodiedtotthemanualformat.
1. InserttheincludedsoftwareCDinyourCD-ROMdriveanddouble-
 click“SetupCloneMe1000-Beta3-20090115.”TheInstallShieldWizard
 willstartautomatically,initiallydisplayingaPreparingtoInstallscreen.
2.WhentheWelcomescreen
 displays,click“Next”tocontinue.
3. WhentheReadytoInstallthe
 Programscreendisplays,click
 “Install.”
44

5
4.WhentheInstallShieldWizard
 Completedscreendisplays,
 click“Finish.”
ONE-TOUCH BACKUP FUNCTION
These steps show how to use the convenient One-Touch Backup feature.
1. Once the software
install is complete,
 aCloneMeicon
will display on the
desktop. Double-
click the icon to
display the initial
function screen.
2. Select where you
want to store your
backed-up data,
 thenclick“Save.”
 Intheexampleat
 right,the“mp3”
folder is designated
as the destination
folder.
5

3. WhentheBackup
 promptasks“Save
the change?” click
 “Yes.”
4.Click“OK”inthe
subsequent prompt
window, then click
 “Backup”orpress
the Backup button
on the device once.
5. The Backing Up screen will
display with a status bar to
indicate that the process has
begun.
6. WhentheBackUpscreen
 displaysthe“Completed
without Error” message, click
 “Close”tonish.
66

SPECIFICATIONS
Standards and Certications
• USB2.0toSATAinterface
• CE
• FCC
General
• MA6116chipset
• SATAL-typeinternaldataandpowerconnections
• DCsingle-postpowerinput(poweradapterincluded)
• Poweradapter:input,100–240V,50–60Hz,0.8A;output,12V/
 2A;cable,1.5m(4.9ft.)
• USBmini-Btotype-Acable,70cm(2.3ft.)
• Workingtemperature:0–45ºC
• ABSconstruction
• Power/activityLEDindicator
• Enclosurestand
• 19.5x12.5x3.5cm(7.75x4.75x1.25in.)
• 184g(6.5oz.)withoutharddrive
System Requirements
• AvailableUSBtype-Aport
• WindowsXP/Vista/7andMacsupport
Package Contents
• DriveEnclosure
• USBcable,poweradapter,stand,installationhardware,screwdriver,
 softwareCDandusermanual

Copyright©MANHATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.
www.manhattan-products.com
MANHATTAN®offers a complete line
ofPCComponents,Peripherals,CablesandAccessories.
Ask your local computer dealer for more information
or visit us online at