Manhattan 176866 User manual

BLUETOOTH
HEADSET
USER MANUAL
Model 176866
MAN-176866-UM-0907-01

Thank you for purchasing the MANHATTAN
®
Bluetooth Headset,
Model 176866.
This lightweight and powerful hands-free mobile communications
solution connects to most Bluetooth-enabled mobile phones so you
can manage hands-free calls conveniently and safely. No special
software or drivers are necessary, so following the simple instructions
in this manual will soon have you enjoying the benets of all these
popular features:
• Easily pairs with notebook PCs and other Bluetooth-enabled
devices to receive wireless audio (it also supports Skype)
• Soft, exible earbud for all-day comfort on either ear
• Answer/end/reject call, volume, power on/off and redial functions
• Up to ve hours of continuous talk time; 100 hours of stand-by time
• Lifetime Warranty
FCC Statement
This device complies with Part 15 of FCC rules. Operation is subject
to the following two conditions: 1) This device may not cause harmful
interference; and 2) this device must accept any interference
received, including interference that my cause undesired operation.
Package Contents
• Bluetooth Headset
• USB power cable (for charging the battery)
• User manual
2

SAFETY, CARE & USAGE
• While driving, always comply with local laws regarding the use of
mobile phones and headsets, and focus only on the road.
• Turn off your headset wherever and whenever the use of electronic
devices is prohibited, as is often indicated in hospitals, aircraft
and potential danger zones such as blasting areas.
• Never store the headset in a vehicle’s air-bag deployment area,
as such deployment can result in injury.
• Do not expose the headset to moisture or excessive humidity, as
it is not waterproof.
• Avoid exposing the headset to very high and very low temperatures.
• Do not disassemble the headset.
• Do not let the headset come in contact with cleaning solvents, .
strong detergents or other harsh chemicals or sharp objects.
• Do not make any modications to the headset, as doing so will void
the warranty.
• Do not dispose of the headset in re, as an explosion can result.
• Use only the included USB cable to charge the headset.
CHARGING THE BATTERY
The MANHATTAN Bluetooth Headset features a built-in lithium-ion
battery that you need to fully charge (3 hours) prior to initial use.
During the charging process, the red LED indicator will remain lit.
Once the battery is fully charged, the LED will turn off. Subsequent
33

battery charges take approximately one hour (or until the red LED
turns off).
To charge the battery, plug the USB cable into the
charging port of the headset and connect it to
your computer via a USB port. After charging
is complete (the red LED turns off), remove
the cable from the device and the computer.
OPERATION
44
Function Button Press & Hold
Power On 1 Long
Power Off 1 Very Long
Enter Pairing Mode 1 Very Long
Voice Dial 1 Short
Answer 1 Short
Reject 1 Long
Redial 1 Double
Accept Waiting Hold 1 Long
Active
Add Hold to TWC 2 Long
(Two-Way Calling)
Volume Up 2 Short
Volume Down 3 Short
Transfer Audio 1+2 Long
Toggle Mode 2+3 Long
1
DC
Input
3
2

55
Red
LED
Blue
LED
••
Power
To turn the headset on, press and hold Button 1
(see chart and image above) for approximately
3 seconds. Two beeps will sound and the blue
LED will ash to indicate that power is on.
To turn the headset off, press and hold Button 1
for approximately 5 seconds. Two beeps will sound and the red LED
will ash to indicate that power is off.
Pairing with Your Cell Phone or Other Bluetooth Devices
1. With the MANHATTAN Bluetooth Headset turned off, press and
hold Button 1 until the red and blue LEDs ash alternately to
indicate the headset is in pairing mode.
2. Proceed with the pairing process as directed in your cell phone
(or other Bluetooth device) manual.
3. When prompted for a PIN, enter “0000” to complete the pairing
process. The blue LED will ash, indicating the
headset is now in standby mode.
NOTE: Some cell phone manuals will instruct you
to keep the headset connected to your cell phone
at this point.
4. If the pairing attempt is unsuccessful after
a minute or so, the procedure will be stopped
and Steps 1–3 will need to be repeated. (If the headset isn’t in
pairing mode, the cell phone — or other BT device — can’t locate it.)

Answering or Ending Calls
When the headset is paired with your cell phone and you receive a
call, a musical tone will sound. Press Button 1 to answer the call.
To end a call, press Button 1 again. NOTE: Due to varying cell phone
designs, a disconnect may occur even with the headset still turned
on; the headset will then fail to ring at the next call. Press Button 1 for
a full second to reconnect the headset with the cell phone.
Making Calls
To voice-dial, press Button 1. After the beep, speak the name of the
person you recorded on your cell phone. NOTE: The availability of
this function depends on your cell phone design.*
If voice-dialing isn’t an option, enter the phone number on your cell
phone: The sound will be transmitted to the headset automatically.
Adjusting the Volume of the Headset
Press Button 2 to increase the listening volume; press Button 3 to
decrease it. You can also adjust the volume using your cell phone.*
Redialing
After ending a call, double-press Button 1 to redial the same number.
NOTE: Availability of this function depends on your cell phone design.
Muting
Press Buttons 2 and 3 simultaneously for a full second. A continuous
6

beep indicates the mute function is in effect. To undo the mute function,
press both buttons simultaneously again.
Rejecting a Call
During a call, press Button 1 for 3 seconds to reject an incoming call.
TROUBLESHOOTING
• A ashing red LED indicates a low battery. Charge as instructed.
• If there is no connection between the headset and your cell phone:
- Ensure the Bluetooth Headset is fully charged.
- Repeat the pairing process.
- Ensure the headset is within 10 m of your cell phone, with no
physical or electronic obstructions (walls, TVs, etc.).*
* Refer to your cell phone manual for details.
SPECIFICATIONS
7
• Standards and certications:
- Bluetooth v. 1.1, 1.2, 2.0
- CE, FCC, RoHS, WEEE
• Bluetooth standards: v 2.0, Class 2;
headset and hands-free proles
• Frequency range: 2.4 – 2.480 GHz
• Spread Spectrum: FHSS (79 channels)
USA/EU
• Modulation: GFSK (Gaussian Frequency
Shift Keying)
• Receiving sensitivity: -80 dBm @ 0.1% BER
• RF output power: -6 – 4 dBm
• Effective range: up to 5 m (16 ft.)
• Battery type: 3.7 V / 70 mAh rechargeable
lithium-polymer
• Talk time: 5 hrs.; standby time: 100 hrs.
• Initial charge: 2–3 hrs.; recharge: 1 hr.
• Dimensions:
- 45 x 11 x 18 mm (1.75 x 0.4 x 0.7 in.)
- USB-to-DC power cable, 13 cm (7.25 in.)
- DC barrel (8.5 x 2.1 mm)
• Weight: 7 g (0.25 oz.)

Are you completely satised with this product?
Please contact your MANHATTAN®dealer
with comments or questions.
Copyright © MANHATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.
www.manhattan-products.com