Manitowoc 7628063 User manual

7628063 COMPOSITE BASE REPAIR KIT
Instructions
1. Area to be repaired must be clean, dry, and free of oil, grease, and residue.
2. Lightly sand repair area to break glaze on base material.
3. Remove all loose material from repair area.
4. Remove divider from adhesive packet and thoroughly mix the two components inside the packet. After the epoxy is
thoroughly mixed, clip a corner of the packet and squeeze material onto a clean piece of paper.
5. Using the wood spatula, work the epoxy into the cracked area, filling voids with epoxy on both sides of the crack.
Smooth epoxy with water-moistened finger or wet cloth. A small piece of metal or plastic covered with cellophane
tape can be lightly clamped to each side of the repair area to achieve a smooth finish.
Manitowoc Ice, Inc.
2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA
Telephone [phone], Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 8011083
Web Site - www.manitowocice.com Rev. 10/06/03
7628063 COMPOSITE BASE REPAIR KIT
Instructions
6. Area to be repaired must be clean, dry, and free of oil, grease, and residue.
7. Lightly sand repair area to break glaze on base material.
8. Remove all loose material from repair area.
9. Remove divider from adhesive packet and thoroughly mix the two components inside the packet. After the epoxy is
thoroughly mixed, clip a corner of the packet and squeeze material onto a clean piece of paper.
10. Using the wood spatula, work the epoxy into the cracked area, filling voids with epoxy on both sides of the crack.
Smooth epoxy with water-moistened finger or wet cloth. A small piece of metal or plastic covered with cellophane
tape can be lightly clamped to each side of the repair area to achieve a smooth finish.