Manta MM274 Harlem Boombox BT User manual

Instrukcja obsługi
User’s Manual
Harlem Boombox BT
MM274

MM274
2
User’s Manual
IMPORTANT NOTES............................................................................................................ 3
REMOTE HANDSET ........................................................................................................... 7
POWER SOURCE......................................................................................................................... 9
BASIC FUNCTION....................................................................................................................... 9
RADIO OPERATION.................................................................................................................10
CD/MP3 OPERATION.............................................................................................................11
LISTENING TO USB/SD CARD............................................................................................15
COMPACT DISC MAINTENANCE......................................................................................16
SPECIFICATIONS ......................................................................................................................18
User’s Manual
WPROWADZENIE ..............................................................................................................20
REMOTE HANDSET .........................................................................................................24
ZASILANIE...................................................................................................................................26
FUNKCJE PODSTAWOWE....................................................................................................26
OBSŁUGA RADIA......................................................................................................................27
OBSŁUGA PŁYT CD/MP3......................................................................................................29
ODTWARZANIE Z PAMIĘCI USB/KARTY SD ...............................................................32
DBAŁOŚĆ O PŁYTY KOMPAKTOWE................................................................................35
SPECIFICATIONS ......................................................................................................................37

MM274
3
IMPORTANT:Pleasereadbeforeusingandkeepforfuture reference.
IMPORTANT NOTES
INTRODUCTION
• Thank you for buying this product.
•
Please read through these operating instructions, so you will know
how to operate your equipment properly. After you nished reading
the instructions manual, put it in a safe place for future reference.
CAUTION
•
Useofcontrols oradjustmentorperformanceofproceduresother
than those specied herein may result in hazardous radiation
exposure.
DANGER
This Compact disc player is clas -
sied as a Class 1 LASER PRODUCT.
THE CLASS 1 LASER PRODUCT label
is located on the rear exterior.
NOTE:
•
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modications.
Avoid installing the unit in locations described below:
1. Places exposed to direct sunlight or close to heat radiating appliances
such as electric heaters, or other equipments that radiate too much
heat.

MM274
4
2. Places subjected to constant vibration.
3. Unventilated or dusty places.
4. Humid or moist places.
• Operate buttons and switches as instructed in the manual.
•
Before turning on the power for the rst time, make sure that the power
cord is properly installed and the voltage switch is correctly set.
•
Store your CD or other devices in a cool area to avoid damage from heat.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO DOT REMOVE
COVER (OR BACK). DO NOT OPEN THE UNIT. ANY SERVICING PLEASE REFER
TO QUALIFIED SERVICE PERSONNEL.
• WARNING:
•
Remove batteries if exhausted or if they will not be used for a long period.
• The incorrect use of batteries can cause electrolyte leakage and will
corrode the compartment or cause the batteries to burst. Therefore:
• Do not mix battery types, e.g. alkaline with zinc carbonate.
• When inserting new batteries, replace all batteries at the same time.

MM274
5
LOCATION OF CONTROLS

MM274
6
1. DISPLAY
2. SPEAKER DECORATION RING
3. LEFT/RIGHT SPEAKERS
4. PHONES JACK
5. SD CARD SLOT
6. USB PORT
7. STANDBY INDICATOR
8. PC/AUX IN JACK
9. PASSIVE SPEAKER DECORATION RING
10.VOLUME KNOB
11.FUNCTION BUTTON
12.EQ/LIGHT BUTTON
13.PROG./P-MODE BUTTON
14.BACK/FAST BACKWARD/-10 BUTTON
15.CD DOOR
16.NEXT/FAST FORWARD/+10 BUTTON
17.STOP BUTTON
18.PLAY BUTTON
19.STANDBY BUTTON
20.TUNING KNOB
21.BACK CABINET
22.FRONT CABINET
23.ANTENNA
24.LEFT/RIGHT PASSIVE SPEAKERS
25.HANDLE
26.BATTERY DOOR
27.AC SOCKET

MM274
7
REMOTE HANDSET
1. FUNCTION KEY
2. MUTE KEY
3. MEMORY KEY
4. EQ KEY
5. FOLD./10/M. UP/DOWN KEY
6. CD B-SKIP DOWN/TUN.- KEY
7. CD PLAY/PAUSE KEY
8. P-MODE KEY
9. STOP/PLAY KEY
10.REPEAT KEY
11.CD F-SKIP UP/TUN.+ KEY
12.ID3 KEY
13.VOLUME UP/DOWN KEY
14.LIGHT KEY
15.MO/ST KEY
16.STANDBY KEY
17.REMOTE SENSER
18.BATTERY COMPARTMENT
Note: Please pull battery protector before using

MM274
8
REMOTE CONTROL OPERATION
Toperate the unit with the remote control,
point the remote handset at
the remote sensor on the front panel and
press the appropriate button
on the remote handset.
The remote works best within a range of 6
~ 7 meters from the front panel
and on an angle of 30 degrees. Bright
sunlight or room light conditions can
interfere with the remote control. If the
remote operation is unsatisfactory
or stops working entirely, rst try repla
cing the remote batteries, then try r
educing the room lighting conditions.
LITHIUM BATTERY INSTALLATION OF REMOTE CONTROL
•
The remote control includes one
CR2025(3V) lithium battery.
•
To replace the battery, gently push the
clasp to the right direction accordingly
to the instruction and then pull out
the battery compartment Take the
drained battery out and install a new
lithium battery(CR-2025) in the com-
partment with the positive polarity
upwarded. Then push the compart-
ment back to its position with a “click”
sound indicating installation nished

MM274
9
POWER SOURCE
This unit is designed to be operated on AC/DC.
AC OPERATION
• Plug the tail of AC power cord into AC socket on unit and the plug into
household AC outlet. The batteries will be automatically disconnected.
DC OPERATION
•
Open the BATTERY COMPARTMENT DOOR. Install 8pcs UM-1/D size
batteries (not included) into compartment. Please follow correct po-
larities as indicated.
CAUTION:
•
Remove batteries if they are at or not being used for a long period
of time. Batteries contain chemical substances, so they should be di-
sposed of properly.
BASIC FUNCTION
SWITCHING ON THE UNIT
After connecting the power, press POWER button to turn on the unit, the
default function is radio. Press the FUNC. button on unit to choose
TUNER / CD / USB / SD/ AUX function.
VOLUME ADJUSTING
• Rotate the VOLUME button on unit to increase or decrease volume.
EQ FUNCTION
• This unit has a built-in equalizer system, Press EQ button on unit while
playing to select dierent music style (sound tone): FLAT, CLASSIC,
ROCK, POP and JAZZ.

MM274
10
HEADPHONE JACK
•
For private listening, insert a 3.5mm headphone (not included) into the
HEADPHONE jack. The SPEAKER output would be automatically cut o.
CAUTION:
•
LISTENING AT A HIGH VOLUME OVER A LONG PERIOD IS NOT GOOD
FOR YOUR EARS.
DISCO LIGHT
• There are ve ashing modes of the disco light, press and hold the EQ/
LIGHT button to choose the desired mode: “LIGHT 01” to “LIGHT 05”.
To turn o the disco light, press and hold the EQ/LIGHT button until
“LIGHT OFF” shows on the display.
RADIO OPERATION
TUNING RADIO STATIONS
• Press the FUNC. button on unit or on the remote control to select the
desired wave band: AM/FM.
• Tune to required station by rotating the TUNING KNOB, the frequency
will show on the display.
• Rotate the VOLUME CONTROL to comfortable volume level.
•
Extend the TELESCOPIC ANTENNA to its full length if you are listening to
FM broadcasting. Gently move the unit back and forth to get the best
reception when you are listening to AM program, or place the unit in
an open place.
•
To turn o the radio, press the FUNC. button to switch to other functions
or press POWER button to turn o the unit.

MM274
11
RADIO AUTO SCAN (SEARCH)
•
Press the button on unit, the unit will conduct auto scan and program
until having found a strong signal. The unit will start to broadcast the
P01 after searching nished.
• Press the /+10 button on unit to choose next programmed station.
RADIO STATION MEMORY OPERATION
You may pre-store AM/ FM each30 radio stations in memory for your
preference, so as you can listen to your desired station directly and quickly,
no need to tuning and search for again.
1. Press PROG./P-MODE button on unit , “P01 ” will ash on the display.
Then rotate the TUNING knob to select the rst desired station.
2.
Press the PROG./P-MODE button on unit to choose the desired sequence
you want to store, then press the PROG./P-MODE button on unit again
to enter.
3. 3Search another station, repeat steps (2) & (3) until all desired stations
stored. Up to 30 stations can be programmed.
4. Press the /-10 or /+10 to listen to the stored station directly.
CD/MP3 OPERATION
Discs for Playback
This system can playback all digital audio CD/MP3, nalized digital audio
CD-Recordable (CD-R) discs, nalized digital audio CD-Rewritable (CD-RW)
discs and CD-DA format digital audio CD/CD-R/CD-RW discs.
LOADING A DISC
1. Press the FUNCTION button on unit to select “CD” mode.
2. Press the PUSH TO OPEN button to open the CD door, “OPEN” will be
shown on the display.
3. Place an audio CD/MP3 DISC into the tray with the front side facing up.

MM274
12
4. Close the CD door. The display will show a ashing “TOC READ”, then
the total number of tracks would be shown and the playback will start
from track.
5. To remove the CD, press POWER button to turn o the unit, then press
the PUSH TO OPEN button to open the CD compartment lid. Hold the
CD by its edges, and take it out carefully.
Note:
1. Make sure the disc is stopped before opening the CD DOOR.
2.
To ensure good system performance; wait until the unit completely
reads the disc before proceeding.
3.
If no disc loaded into the tray, or the disc is unreadable, the display
will show “NO DISC”.
PLAYING A DISC
1. The playback starts from track 1 automatically when reading the disc.
To pause playback, press / button on unit. The current playing time
will ash on the display. To resume playback, press button on unit
again.
2.
To stop playback, press STOP button on unit, the total number of tracks.
SELECTING A DESIRED TRACK/PASSAGE
To select a desired track
Press the /+10 or /-10 button on unit on stop mode or during playing
until the desired track appears on the display. It will start play automatically.
To search for a particular passage during playback (track scanning
at high speed)
Press and hold the /+10 or /-10 button on unit to scan the current
playing
track at high speed until desired point (passage) appears, then release the

MM274
13
button for normal playback mode. Playback will start again from this point.
PROGRAMING TRACKS
Programming tracks of disc are possible when playback is stopped. Up to
20 tracks for CD disc and 99 tracks for MP3 disc can be stored in the
memory in any order.
1.
In stop mode, press the PROG./P-MODE button on unit enter program
setting, the PROG logo will ash on the display and show P01.
2. Press the /+10 button on unit to select the rst desired track to be
programmed. (example: track 2)
3. Press the PROG./P-MODE button on unit to enter. The display would
ash PROG and show P02.
4.
Repeat steps 2 & 3 to store other desired tracks until all tracks
programmed.
5.
Press the button on unit to start playback from the rst programmed
track. The display will show the rst programmed track No. and the “
PROG „ indicator will light up on LCD display.
6.
Press the STOP button on unit to stop program playback. To clear the
program, you may press STOP button on unit when the disc stopped
and open the CD compartment lid, the program will be erased.
REPEAT PLAY
You can play one track or all tracks on the disc repeatedly.
To Repeat a Single Track
1. Press PROG./P-MODE button on unit during play, the display will show
a steady “ ” and the current track will be played over an over again
till you press the STOP button on unit .
2. To cancel repeat play, press PROG./P-MODE button on unit until “ ”
disappears from the display.

MM274
14
To repeat all the Tracks
1. Press PROG./P-MODE button on unit until the “ ALL” shows steadily
on the display, all tracks on the disc will be played over and over again
till you press the STOP button on unit.
2. To cancel repeat play, press the PROG./P-MODE button on unit until “
ALL” disappears from the display.
To repeat the folder
(only for MP3 disc which contains more than one folder)
• Press the PROG./P-MODE button on unit until “ DIR ” show steadily
on the display, the current folder will be repeated over and over again
till you press the STOP button on unit.
• To cancel repeat play, press the PROG./P-MODE button on unit until “
DIR ” disappear from the display.
RANDOM PLAY
• Press the PROG./P-MODE button on unit in play mode till the “RAN”
shows steadily on the display, the random play will start from next track
automatically, until all tracks are played over and then it will stop. Press
the PROG./P-MODE button on unit again until the “RAN” disappears
from the display to cancel.
INTRO PLAY
• Press the PROG. /P-MODE button on unit in play mode till the “INTRO”
shows steadily on the display, the intro play will start and scan 10 seconds
for every track. To cancel intro play, press the PROG./P-MODE button
on unit until “INTRO ” disappear from the display.

MM274
15
LISTENING TO USB/SD CARD
USB OPERATION
1. Press the FUNCTION button on unit to select “USB” mode.
2.
Connect the USB to the USB INPUT. The LCD will show the total number
of tracks stored in the USB. The playback stars from track 1 automatically
after reading the USB.
3. To pause playback, press button on unit. The current playing time
will ash on the display. To resume playback, press button on unit
again.
4.
Press the STOP button on unit to stop playing. The display will show
total number of USB and STOP.
5. Proceed program play/repeat play (repeat 1- repeat folder - repeat all)/
random play/intro play operation as the same described in above “CD/
MP3 OPERATION”.
CAUTION:
• Do not use any USB extension cable for connecting the USB bar which
may cause harmful interference
SD CARD OPERATION
1. Press the FUNC. button on unit to select “CARD” mode.
2.
Connect the SD CARD to the SD INPUT. The LCD will show the total
number of tracks stored in the SD CARD. The playback stars from track
1 automatically after reading.
3. To pause playback, press button on unit. The current playing time
will ash on the display. To resume playback, press button on unit
again.
4. Press the STOP button on unit to stop playing. The display will show
total number of USB and STOP.

MM274
16
5. Proceed program play/repeat play (repeat 1- repeat folder - repeat all)/
random play/intro play operation as the same described in above “CD/
MP3 OPERATION”.
AUX-IN OPERATION
1. Press the FUNCTION button to select “AUX” mode.
2. Insert the AUX line plug into the AUX IN jack (Φ3.5mm) on the player,
music from the device would be amplied and exported from the
speakers.
3. Adjust the volume on the unit or on the device to your desired level.
4. Proceed play/pause and next/previous on the device.
COMPACT DISC MAINTENANCE
1. Always use a compact disc bearing the mark as shown.
2. Notes on handling discs
• Removing the disc from its storage case and loading it.
• Do not touch the reective recorded surface.
• Do not stick paper or write anything on the surface.
• Do not bend the disc.

MM274
17
3. Storage
• Store the disc in its case.
• Do not expose discs to direct sunlight or high temperatures, high
humidity or dusty places.
DO NOT STORE NEAR HEAT
4. Cleaning a disc
•
Should the disc become soiled, wipe o dust, dirt and ngerprints
with a soft cloth.
• The disc should be cleaned from the center to the edge.
• Never use benzene, thinners, record cleaner uid or anti-static spray.
• Be sure to close the CD door, so the lens is not contaminated by dust.
• Do not touch the lens.

MM274
18
SPECIFICATIONS
GENERAL
Power Requirementr AC100V~240V -50/60Hz
DC 12V UM-1/D x 8pcs
Power consumption 48 Watts
Dimensions: 210(D) x 492(W) x 198 (H) mm
Operation temperature + 5°C – + 35° C
RECEIVER SECTION
Receiving Bands AM/FM.ST
Frequency Range
AM: 530-1710KHz FM:87.5 – 108 MHz
COMPACT DISC SECTION
Optical Pickup 3-Beam Laser
Frequency Response 100Hz – 16KHz
AUDIO SECTION
Power output 12.5W x 2
ACCESSORIES
Instruction Booklet 1
AC Cord 1
• Note: Specications are subject to change for continuous
improvement without prior notice.

MM274
19

MM274
20
WPROWADZENIE
WAŻNE INFORMACJE
• Dziękujemy za zakup naszego produktu.
• Prosimy o dokładne zapoznanie się z niniejszą instrukcją obsługi, aby
dowiedzieć się, jak prawidłowo obsługiwać zakupiony sprzęt. Zaleca-
my, aby po przeczytaniu instrukcji odłożyć ją w bezpieczne miejsce i
umożliwić skorzystanie z niej w przyszłości.
UWAGA
•
Użytkowanie elementów sterowania bądź regulacyjnych innych, niż
opisane w instrukcji, lub wykonywanie procedur, które nie zostały
przedstawione w tym dokumencie, może spowodować narażenie na
działanie groźnego promieniowania.
NIEBEZPIECZEŃSTWO
Ten odtwarzacz płyt kompakto-
wych jest klasykowany jako PRO-
DUKT LASEROWY klasy 1.
Etykietę oznaczającą PRODUKT
LASEROWY KLASY 1 umieszczono z
tyłu urządzenia
UWAGA:
•
Producent nie ponosi odpowiedzialności za zakłócenia fal radiowych lub
telewizyjnychwywołane przeznieuprawnione modykacjesprzętowe..
PRODUKT LASEROWY KLASY 1
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT