Marantz SM-11S1 User manual

apanlZ®
Model 5M-1151 User Guide
Stereo Power Amplifier
apanlZ®
Model 5M-1151 User Guide
Stereo Power Amplifier

RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCETHE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol within
an equilateral triangle is intended to
alert the
user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may
be of sufficient magnitude to constitute arisk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA
PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPON·DANTE DE LA PRISE ET
POUSSER JUSQU'AU FOND.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCETHE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol within
an equilateral triangle is intended to
alert the
user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may
be of sufficient magnitude to constitute arisk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA
PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPON·DANTE DE LA PRISE ET
POUSSER JUSQU'AU FOND.

IMPORTANT SAFETY
INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
This product was designed and manufactured to
meet strict quality and safety standards.
There are, however, some installation and operation precautions which you should be particularly aware
of.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacture's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. Apolarized plug has two blades with one wider than
the other. Agrounding type plug has two blades and athird grounding prong. The wide blade or the third prong are provided for
your safety.
If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When acart
is
used, use caution when moving the carVapparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such
as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has been dropped.
Additional Safety Information!
•This product should not be placed in abuilt-in installation such as abookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered
to.
•Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on
the apparatus.
•When the switch is
in the OFF position, the apparatus isn't completely switched-off from the MAINS.
•The equipment shall be installed near the Socket-Outlet and shall be easily accessible.
Do not touch hot spots during and immediately after use.
During and immediately after use, this product is hot in areas other than the controls and rear panel connection jacks. Do not touch
hot spots and especially the top panel. Contact with hot areas can cause burns.
Do not expose the unit to excessive heat such as direct sunlight, fire or the like.
I AMP 070719U2!
IMPORTANT SAFETY
INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
This product was designed and manufactured to
meet strict quality and safety standards.
There are, however, some installation and operation precautions which you should be particularly aware
of.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacture's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. Apolarized plug has two blades with one wider than
the other. Agrounding type plug has two blades and athird grounding prong. The wide blade or the third prong are provided for
your safety.
If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When acart
is
used, use caution when moving the carVapparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such
as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has been dropped.
Additional Safety Information!
•This product should not be placed in abuilt-in installation such as abookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered
to.
•Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on
the apparatus.
•When the switch is
in the OFF position, the apparatus isn't completely switched-off from the MAINS.
•The equipment shall be installed near the Socket-Outlet and shall be easily accessible.
Do not touch hot spots during and immediately after use.
During and immediately after use, this product is hot in areas other than the controls and rear panel connection jacks. Do not touch
hot spots and especially the top panel. Contact with hot areas can cause burns.
Do not expose the unit to excessive heat such as direct sunlight, fire or the like.
I AMP 070719U2!

WARRANTY
For warranty information, contact your local Marantz distributor.
RETAIN YOUR PURCHASE RECEIPT
Your purchase receipt is your permanent record ofavaluable purchase.
It should be kept in asafe place to be referred to as necessary for
insurance purposes or when corresponding with Marantz.
IMPORTANT
When seeking warranty service, it is the responsibility of the consumer to
establish proof and date of purchase. Your purchase receipt or invoice is
adequate for such proof.
FOR U.K. ONLY
This undertaking is in addition to aconsumer's statutory rights and
does not affect those rights in any way.
GARANTIE
Pour des informations sur la garantie, contacter Ie distributeur local
Marantz.
CONSERVER L'ATTESTATION D'ACHAT
L'attestation d'achat est la preuve permanente d'un achat de valeur.
La conserver en lieu sur pour s'y reporter aux fins d'obtention d'une
couverture d'assurance ou dans
Ie cadre de correspondances avec
Marantz.
IMPORTANT
Pour I'obtention d'un service couvert par la garantie, il incombe au
client d'etablir la preuve de I'achat et d'en corroborer la date. Le rec;:u
ou la facture constituent des preuves suffisantes.
GARANTIE
Bei Garantiefragen wenden Sie sich bitte an Ihren Marantz-Handler.
HEBEN S/E IHRE QUITTING GUT AUF
Die Ouittung dient Ihnen als bleibende Unterlage fOr Ihren wertvollen
Einkauf Das Aufbewahren der Ouittung ist wichtig, da die darin
enthaltenen Angaben
fOr Versicherungswecke oderbei Korrespondenz
mit Marantz angefOhrt werden mOssen.
WICHTIGI
Bei Garantiefragen muB der Kunde eine Kaufunterlage mit
Kaufdatum vorlegen. Ihren Ouittung oder Rechnung ist als Unterlage
ausreichend.
GARANTIE
Voor inlichtingen omtrent garantie dient uzich tot uw plaatselijke
Marantz.
UW KWITANTIE, KASSABON E.D. BEWAREN
Uw kwitantie, kassabon e.d. vormen uw bewijs van aankoop van
een waardevol artikel
en dienen op een veilige plaats bewaard te
worden voor evt, verwijzing bijv, in verbend met verzekering of bij
correspondentie met Marantz.
BELANGRIJK
Bij een evt, beroep op de garantie is het de verantwoordelijkheid van de
consument een gedateerd bewijs van aankoop te tonen. Uw kassabon
of factuurzijn voldoende bewijs.
ITALIANo
GARANZIA
L:apparecchio ecoperto da una garanzia di buon funzionamento della
durata di un anno, 0del periodo previsto dalla legge, apartire dalla
data di acquisto comprovata da un documento attestante il nominativo
del Rivenditore ela data
di vendita. La garanzia sara prestata con la
sostituzione 0 la riparazione gratuita delle parti difettose.
Non sono coperti
da garanzia difetti derivanti da uso improprio, errata
installazione, manutenzione effettuata da personale non autorizzato
0, comunque, da circostanze che non possano riferirsi adifetti di
funzionamento dell'apparecchio. Sono inoltre esclusi dalla garanzia
gli interventi inerenti I'installazione eI'allacciamento agli impianti di
alimentazione.
Gli apparecchi verranno riparati presso inostri Centri di Assistenza
Autorizzati.
Le spese ed irischi di trasporto sono acarico del cliente.
La cas acostruttrice declina ogni responsabilita per danni diretti 0indiretti
provocati dalla inosservanza delle prescrizioni
di installazione, uso e
manutenzione dettagliate
nel presente manuale 0per guasti dovuti ad uso
continuato a fini professionali.
WARRANTY
For warranty information, contact your local Marantz distributor.
RETAIN YOUR PURCHASE RECEIPT
Your purchase receipt is your permanent record ofavaluable purchase.
It should be kept in asafe place to be referred to as necessary for
insurance purposes or when corresponding with Marantz.
IMPORTANT
When seeking warranty service, it is the responsibility of the consumer to
establish proof and date of purchase. Your purchase receipt or invoice is
adequate for such proof.
FOR U.K. ONLY
This undertaking is in addition to aconsumer's statutory rights and
does not affect those rights in any way.
GARANTIE
Pour des informations sur la garantie, contacter Ie distributeur local
Marantz.
CONSERVER L'ATTESTATION D'ACHAT
L'attestation d'achat est la preuve permanente d'un achat de valeur.
La conserver en lieu sur pour s'y reporter aux fins d'obtention d'une
couverture d'assurance ou dans
Ie cadre de correspondances avec
Marantz.
IMPORTANT
Pour I'obtention d'un service couvert par la garantie, il incombe au
client d'etablir la preuve de I'achat et d'en corroborer la date. Le rec;:u
ou la facture constituent des preuves suffisantes.
GARANTIE
Bei Garantiefragen wenden Sie sich bitte an Ihren Marantz-Handler.
HEBEN S/E IHRE QUITTING GUT AUF
Die Ouittung dient Ihnen als bleibende Unterlage fOr Ihren wertvollen
Einkauf Das Aufbewahren der Ouittung ist wichtig, da die darin
enthaltenen Angaben
fOr Versicherungswecke oderbei Korrespondenz
mit Marantz angefOhrt werden mOssen.
WICHTIGI
Bei Garantiefragen muB der Kunde eine Kaufunterlage mit
Kaufdatum vorlegen. Ihren Ouittung oder Rechnung ist als Unterlage
ausreichend.
GARANTIE
Voor inlichtingen omtrent garantie dient uzich tot uw plaatselijke
Marantz.
UW KWITANTIE, KASSABON E.D. BEWAREN
Uw kwitantie, kassabon e.d. vormen uw bewijs van aankoop van
een waardevol artikel
en dienen op een veilige plaats bewaard te
worden voor evt, verwijzing bijv, in verbend met verzekering of bij
correspondentie met Marantz.
BELANGRIJK
Bij een evt, beroep op de garantie is het de verantwoordelijkheid van de
consument een gedateerd bewijs van aankoop te tonen. Uw kassabon
of factuurzijn voldoende bewijs.
ITALIANo
GARANZIA
L:apparecchio ecoperto da una garanzia di buon funzionamento della
durata di un anno, 0del periodo previsto dalla legge, apartire dalla
data di acquisto comprovata da un documento attestante il nominativo
del Rivenditore ela data
di vendita. La garanzia sara prestata con la
sostituzione 0 la riparazione gratuita delle parti difettose.
Non sono coperti
da garanzia difetti derivanti da uso improprio, errata
installazione, manutenzione effettuata da personale non autorizzato
0, comunque, da circostanze che non possano riferirsi adifetti di
funzionamento dell'apparecchio. Sono inoltre esclusi dalla garanzia
gli interventi inerenti I'installazione eI'allacciamento agli impianti di
alimentazione.
Gli apparecchi verranno riparati presso inostri Centri di Assistenza
Autorizzati.
Le spese ed irischi di trasporto sono acarico del cliente.
La cas acostruttrice declina ogni responsabilita per danni diretti 0indiretti
provocati dalla inosservanza delle prescrizioni
di installazione, uso e
manutenzione dettagliate
nel presente manuale 0per guasti dovuti ad uso
continuato a fini professionali.

English
WARNINGS
Do not expose the equipment to rain, moisture, dripping or
splashing.
-
Do not remove the cover from the equipment.
-
Do not insert anything into the equipment through the ventilation
holes.
-
Do not handle the mains cord with wet hands.
Do not cover the ventilation with any items such as tablecloths,
newspapers, curtains, etc.
No naked flame sources, such as lighted candles, should be placed
on the equipment.
When disposing of used batteries, please comply with governmental
regulations or environmental public instruction's rules that apply
in
your country or area.
Make aspace of about 0.2 meter around the unit.
No objects filled with liquids, such as vases, shall be placed
on the
equipment.
When the switch is
in the OFF position, the equipment is not
completely switched
011 from MAINS.
-The equipment shall be installed near the power supply
so that the
power supply is easily accessible.
-
Do not touch hot spots during and immediately after use.
During and immediately after use, this product is hot
in areas other
than the controls and rear panel connection jacks. Do not touch hot
spots and especially the top panel. Contact with hot areas can cause
burns.
Do not expose the unit to excessive heat such as direct sunlight, fire
or the like.
(E:
(E:
(E:
(E:
(E:
CE MARKING
English
The SM-11 S1 is
in conformity with the EMC directive and
low-voltage directive.
Fran~ais
Le SM-11 S1 est conforme 11 la directive EMC et 11 la directive
sur les basses tensions.
Deutsch
Das Modell SM-11
Sl entspricht den EMC-Richtlinien und
den Richtlinien
fOr Niederspannungsgerate.
Nederlands
De SM-11 S1 voldoet aan de EMC eisen en de vereisten
voor laag-voltage.
Italiano
II SM-11 S1 econforme aile direttive CEE ed aquelle per i
bassi voltaggi.
Franfais AVERTISSEMENTS
Ne pas exposer I'appareil 11 la pluie, 11 I'humidite, 11 I'egouttement ou
aux eclaboussures.
-Ne pas essayer de retirer
Ie boltier de I'appareil.
-Ne rien inserer dans I'appareil par les orifices de ventilation.
Ne pas manipuler Ie cordon d'alimentation avec les mains
mouillees.
Ne pas recouvrir les oures de ventilation avec
un objet quelconque
comme une nappe, un journal, un rideau, etc.
Ne placer aucune source
de flamme nue, comme une bougie
allumee, sur I'appareil.
-
Pour mettre au rebut les piles usees, respecter les lois
gouvernementales ou les reglements officiels concernant
I'environnement qui s'appliquent 11 votre pays ou region.
Veiller
11 ce qu'aucun objet ne soit 11 moins de 0,2 metre des cotes
de I'appareil.
Aucun objet rempli de Iiquide,
un vase par exemple, ne doit etre
place sur I'appareil.
Lorsque I'interrupteur est sur
la position OFF, I'appareil n'est pas
completement deconnecte du SECTEUR (MAINS).
-L'appareil sera installe presde la source d'alimentation, de sorte que
cette derniere so
it facilement accessible.
-Ne pas toucher aux zones chaudes pendant et immectiatement
apres I'utilisation.
Pendant I'utilisation et immediatement apres, cet appareil est chaud
en dehors des commandes et des prises de raccordement arriere.
Ne pas toucher aux zones chaudes, et particulierement au panneau
superieur, pour eviter tout risque de
brOlure.
-Ne pas exposerI'appareil 11 unechaleur excessive, comme celie des
rayons directs du soleil, d'un feu, etc.
Deutsch
WARNHINWEISE
-Das Gerat nicht Regen, Feuchtigkeit, Tropf- oder Spritzwasser
aussetzen.
Die Abdeckung nicht vom Gerat abnehmen.
Keine Gegenstande durch die BelOftungsschlitze stecken.
-Das Netzkabel nicht mit feuchten oder nassen Handen anfassen.
Decken Sie die
LOftungs611nungen nicht mit einem Tischtuch, einer
Zeitung, einem Vorhang
usw. abo
Es dOrfen keine Gegenstande mit offener Flamme, wie etwa
brennende Kerzen, auf dem Gerat aufgestellt werden.
Beachten Sie
bei der Entsorgung der verbrauchten Batterien aile
geltenden lokalen und Oberregionalen Regelungen.
Auf allen Gerateseiten muB ein Zwischenraum von ungefahr 0,2
meter vorhanden sein.
-Auf das Gerat
dOrfen keine mit FIOssigkeiten gefOlite Behalter, wie
etwa eine Vase, gestellt werden.
Wenn der Schalter ausgeschaltet ist (OFF-Position), ist das Gerat
nicht vollstandig vom Stromnetz (MAINS) abgetrennt.
Das Gerat sollte
in der Nahe einer Netzsteckdose aufgestellt
werden, damit es leicht an das Stromnetz angeschlossen werden
kann.
-BerOhren Sie wahrend oder unmittelbar nach dem Gebrauch keine
heiBen Stell
en des Gerates.
Wahrend oder unmittelbar nach dem Gebrauch ist dieses Produkt
mit Ausnahme der Bedienelemente und der Anschlussbuchsen
auf
der ROckseite heiB. BerOhren Sie die heiBen Stellen und
insbesondere die Oberseite nicht. Der Kontakt mit heiBen Flachen
kann
zu Verbrennungen fOhren.
Setzen Sie das Gerat keiner ObermaBigen Warme aus, z.B. durch
Aufstellung in direkter Sonneneinstrahlung,
in der Nahe eines
ollenen Feuers
usw.
English
WARNINGS
Do not expose the equipment to rain, moisture, dripping or
splashing.
-
Do not remove the cover from the equipment.
-
Do not insert anything into the equipment through the ventilation
holes.
-
Do not handle the mains cord with wet hands.
Do not cover the ventilation with any items such as tablecloths,
newspapers, curtains, etc.
No naked flame sources, such as lighted candles, should be placed
on the equipment.
When disposing of used batteries, please comply with governmental
regulations or environmental public instruction's rules that apply
in
your country or area.
Make aspace of about 0.2 meter around the unit.
No objects filled with liquids, such as vases, shall be placed
on the
equipment.
When the switch is
in the OFF position, the equipment is not
completely switched
011 from MAINS.
-The equipment shall be installed near the power supply
so that the
power supply is easily accessible.
-
Do not touch hot spots during and immediately after use.
During and immediately after use, this product is hot
in areas other
than the controls and rear panel connection jacks. Do not touch hot
spots and especially the top panel. Contact with hot areas can cause
burns.
Do not expose the unit to excessive heat such as direct sunlight, fire
or the like.
(E:
(E:
(E:
(E:
(E:
CE MARKING
English
The SM-11 S1 is
in conformity with the EMC directive and
low-voltage directive.
Fran~ais
Le SM-11 S1 est conforme 11 la directive EMC et 11 la directive
sur les basses tensions.
Deutsch
Das Modell SM-11
Sl entspricht den EMC-Richtlinien und
den Richtlinien
fOr Niederspannungsgerate.
Nederlands
De SM-11 S1 voldoet aan de EMC eisen en de vereisten
voor laag-voltage.
Italiano
II SM-11 S1 econforme aile direttive CEE ed aquelle per i
bassi voltaggi.
Franfais AVERTISSEMENTS
Ne pas exposer I'appareil 11 la pluie, 11 I'humidite, 11 I'egouttement ou
aux eclaboussures.
-Ne pas essayer de retirer
Ie boltier de I'appareil.
-Ne rien inserer dans I'appareil par les orifices de ventilation.
Ne pas manipuler Ie cordon d'alimentation avec les mains
mouillees.
Ne pas recouvrir les oures de ventilation avec
un objet quelconque
comme une nappe, un journal, un rideau, etc.
Ne placer aucune source
de flamme nue, comme une bougie
allumee, sur I'appareil.
-
Pour mettre au rebut les piles usees, respecter les lois
gouvernementales ou les reglements officiels concernant
I'environnement qui s'appliquent 11 votre pays ou region.
Veiller
11 ce qu'aucun objet ne soit 11 moins de 0,2 metre des cotes
de I'appareil.
Aucun objet rempli de Iiquide,
un vase par exemple, ne doit etre
place sur I'appareil.
Lorsque I'interrupteur est sur
la position OFF, I'appareil n'est pas
completement deconnecte du SECTEUR (MAINS).
-L'appareil sera installe presde la source d'alimentation, de sorte que
cette derniere so
it facilement accessible.
-Ne pas toucher aux zones chaudes pendant et immectiatement
apres I'utilisation.
Pendant I'utilisation et immediatement apres, cet appareil est chaud
en dehors des commandes et des prises de raccordement arriere.
Ne pas toucher aux zones chaudes, et particulierement au panneau
superieur, pour eviter tout risque de
brOlure.
-Ne pas exposerI'appareil 11 unechaleur excessive, comme celie des
rayons directs du soleil, d'un feu, etc.
Deutsch
WARNHINWEISE
-Das Gerat nicht Regen, Feuchtigkeit, Tropf- oder Spritzwasser
aussetzen.
Die Abdeckung nicht vom Gerat abnehmen.
Keine Gegenstande durch die BelOftungsschlitze stecken.
-Das Netzkabel nicht mit feuchten oder nassen Handen anfassen.
Decken Sie die
LOftungs611nungen nicht mit einem Tischtuch, einer
Zeitung, einem Vorhang
usw. abo
Es dOrfen keine Gegenstande mit offener Flamme, wie etwa
brennende Kerzen, auf dem Gerat aufgestellt werden.
Beachten Sie
bei der Entsorgung der verbrauchten Batterien aile
geltenden lokalen und Oberregionalen Regelungen.
Auf allen Gerateseiten muB ein Zwischenraum von ungefahr 0,2
meter vorhanden sein.
-Auf das Gerat
dOrfen keine mit FIOssigkeiten gefOlite Behalter, wie
etwa eine Vase, gestellt werden.
Wenn der Schalter ausgeschaltet ist (OFF-Position), ist das Gerat
nicht vollstandig vom Stromnetz (MAINS) abgetrennt.
Das Gerat sollte
in der Nahe einer Netzsteckdose aufgestellt
werden, damit es leicht an das Stromnetz angeschlossen werden
kann.
-BerOhren Sie wahrend oder unmittelbar nach dem Gebrauch keine
heiBen Stell
en des Gerates.
Wahrend oder unmittelbar nach dem Gebrauch ist dieses Produkt
mit Ausnahme der Bedienelemente und der Anschlussbuchsen
auf
der ROckseite heiB. BerOhren Sie die heiBen Stellen und
insbesondere die Oberseite nicht. Der Kontakt mit heiBen Flachen
kann
zu Verbrennungen fOhren.
Setzen Sie das Gerat keiner ObermaBigen Warme aus, z.B. durch
Aufstellung in direkter Sonneneinstrahlung,
in der Nahe eines
ollenen Feuers
usw.

Nederlands
WAARSCHUWINGEN
-Stel het apparaat niet bloot aan regen, vocht, druppels of spetters.
-Verwijder de afdekplaat van het apparaat niet.
Duw niets door de ventilatieopeningen
in het apparaat.
Raak het netsnoer niet met natte handen aan.
Bedek de ventilatieopeningen niet met enige voorwerpen, zoals
tafelkleden, kranten, gordijnen, enz.
Plaats geen brandende voorwerpen, zoals kaarsen, op het
apparaat.
Voig bij hetweggooienvanverbruiktebatterijendeoverheidswetgeving
of milieuvoorschriften op die van kracht zijn
in het land of de regio
waarin uzich bevindt.
-Zorg dat er 0,2 meter vrije ruimte rond het toestel
is.
Plaats geen voorwerpen met een vloeistof erin, zoals een
bloemenvaas, op het apparaat.
Ais de schakelaar op OFF staat, is het apparaat niet volledig
losgekoppeld van de netspanning (MAINS).
De apparatuur wordt
in de buurt van het stopcontact ge'installeerd,
zodat dit altijd gemakkelijk toegankelijk
is.
Raak hete gedeelten van het apparaat niet aan tijdens en
onmiddellijk na het gebruik.
Tijdens
en onmiddellijk na het gebruik is dit product heet, behalve
in de omgeving van de bedieningstoetsen en de aansluitingen
op het achterpaneel. Raak geen hete plekken aan, vooral niet
het bovenpaneel. Contact met hete plekken kan brandwonden
veroorzaken.
-Stel het apparaat niet bloot aan grote warmte, zoals direct zonlicht,
vuur
en dergelijke.
Italiano
AVVERTENZE
-Non esporre I'apparecchio alia pioggia, all'umidita, al gocciolamento
oagli spruzzi.
Non rimuovere
il coperchio dell'apparecchio.
Non introdurre oggetti all'interno dell'apparecchio attraverso ifori di
ventilazione.
Non toccare
il cavo di alimentazione con Ie mani bagnate.
Non coprire
Ie fessure di ventilazione con tovaglie, giornali, tende od
oggetti analog
hi.
-Non posare sull'apparecchio sorgenti di fiamme scoperte quali
candele accese.
-Smaltire Ie pile usate
in conformita aile norme governative 0
disposizioni ambientali vigenti nel proprio paese 0zona.
-Lasciare 0,2 metro liberi tutto intorno I'unita.
Non mettere sull'apparecchiatura alcun contenitore
di liquido, come
ad esempio dei vasi.
-Quando I'interruttore enella posizione
OFF, I'apparecchiatura non e
completamente scollegata da MAINS.
-L.:apparecchio va installato
in prossimita dellafonte di alimentazione,
in modo che quest'ultima sia facilmente accessibile.
Non toccare ipunti caldi ne durante, ne immediatamente dopo
I'uso.
Durante, esubito dopo I'utilizzo, questa prodotto risulta essere molto
caldo
in alcune sue parti come ad esempio iconnettori del pannello
posteriore. Non toccare ipunti caldi especialmente la superficie del
pannello.
II contatto con parti calde puo provocare ustioni.
Non esporre I'unita ad eccessivo calore come la luce direttadel sole,
il fuoco 0simili.
I AMP 070719N1 I
Nederlands
WAARSCHUWINGEN
-Stel het apparaat niet bloot aan regen, vocht, druppels of spetters.
-Verwijder de afdekplaat van het apparaat niet.
Duw niets door de ventilatieopeningen
in het apparaat.
Raak het netsnoer niet met natte handen aan.
Bedek de ventilatieopeningen niet met enige voorwerpen, zoals
tafelkleden, kranten, gordijnen, enz.
Plaats geen brandende voorwerpen, zoals kaarsen, op het
apparaat.
Voig bij hetweggooienvanverbruiktebatterijendeoverheidswetgeving
of milieuvoorschriften op die van kracht zijn
in het land of de regio
waarin uzich bevindt.
-Zorg dat er 0,2 meter vrije ruimte rond het toestel
is.
Plaats geen voorwerpen met een vloeistof erin, zoals een
bloemenvaas, op het apparaat.
Ais de schakelaar op OFF staat, is het apparaat niet volledig
losgekoppeld van de netspanning (MAINS).
De apparatuur wordt
in de buurt van het stopcontact ge'installeerd,
zodat dit altijd gemakkelijk toegankelijk
is.
Raak hete gedeelten van het apparaat niet aan tijdens en
onmiddellijk na het gebruik.
Tijdens
en onmiddellijk na het gebruik is dit product heet, behalve
in de omgeving van de bedieningstoetsen en de aansluitingen
op het achterpaneel. Raak geen hete plekken aan, vooral niet
het bovenpaneel. Contact met hete plekken kan brandwonden
veroorzaken.
-Stel het apparaat niet bloot aan grote warmte, zoals direct zonlicht,
vuur
en dergelijke.
Italiano
AVVERTENZE
-Non esporre I'apparecchio alia pioggia, all'umidita, al gocciolamento
oagli spruzzi.
Non rimuovere
il coperchio dell'apparecchio.
Non introdurre oggetti all'interno dell'apparecchio attraverso ifori di
ventilazione.
Non toccare
il cavo di alimentazione con Ie mani bagnate.
Non coprire
Ie fessure di ventilazione con tovaglie, giornali, tende od
oggetti analog
hi.
-Non posare sull'apparecchio sorgenti di fiamme scoperte quali
candele accese.
-Smaltire Ie pile usate
in conformita aile norme governative 0
disposizioni ambientali vigenti nel proprio paese 0zona.
-Lasciare 0,2 metro liberi tutto intorno I'unita.
Non mettere sull'apparecchiatura alcun contenitore
di liquido, come
ad esempio dei vasi.
-Quando I'interruttore enella posizione
OFF, I'apparecchiatura non e
completamente scollegata da MAINS.
-L.:apparecchio va installato
in prossimita dellafonte di alimentazione,
in modo che quest'ultima sia facilmente accessibile.
Non toccare ipunti caldi ne durante, ne immediatamente dopo
I'uso.
Durante, esubito dopo I'utilizzo, questa prodotto risulta essere molto
caldo
in alcune sue parti come ad esempio iconnettori del pannello
posteriore. Non toccare ipunti caldi especialmente la superficie del
pannello.
II contatto con parti calde puo provocare ustioni.
Non esporre I'unita ad eccessivo calore come la luce direttadel sole,
il fuoco 0simili.
I AMP 070719N1 I

Thank you for purchasing this Marantz SM-11S1 Stereo Power Amplifier. I
Please read these operating instructions carefully. We recommend that you read the entire user guide before
you attempt to connect or operate the player.
After you have reviewed the contents of this manual, we suggest that you makeall system connections before
you attempt to operate the unit .
• Checking the accessories
After opening the cover of the packing box, check that the
following accessories are included.
•AC Power
cord
SM-11 S1 (U.S.A.)
SM-11S1 (Europe)
•User
Guide
•Warranty Card (U.S.A)
(U.S.A. x
1, Canada x 1)
ANOTE ABOUT RECYCLING
This product's packaging materials are recyclable
and can be reused. This product and the accessories
packed together are the applicable product to the WEEE
directive except batteries.
Please dispose of any materials
in accordance with your
local recycling regulations.
When discarding the unit, comply with your local rules
or regulations.
Batteries should never be thrown away or incinerated
but disposed of
in accordance with your local regulations
concerning chemical wastes.
[~C_O_N_TE_N_T_S ~]
FEATURES 2
BEFORE USING 3
EQUIPMENT MAINS WORKING SETIING 3
COPYRIGHT 3
INAPPROPRIATE PLACES FOR INSTALLATION 3
NAMES AND FUNCTIONS OF PARTS 4
FRONT PANEL 4
DiSPLAy 5
REAR PANEL 6
CONNECTIONS 7
BALANCED JACKS 7
WIRING SPEAKER CABLE 8
SPEAKER POSITIONING FOR SUPER AUDIO MULTI-CHANNEL SOUND 17
CONNECTING THE POWER SUPPLY 17
HOWTO USE AND SET FEATURES 18
HOW TO USE THE METER MODE BUTION (DIGITAL POWER METER) 18
BALANCED INPUT/UNBALANCED INPUT GAIN
SETIINGS 18
AMP MODE 19
HOW
TO OPERATE THE SIDE ILLUMINATION 19
REMOTE POWER CONTROL 20
TROUBLESHOOTING 21
SPECIFICATIONS &DIMENSIONAL DRAWiNGS 22
OTHERS 23
Thank you for purchasing this Marantz SM-11S1 Stereo Power Amplifier. I
Please read these operating instructions carefully. We recommend that you read the entire user guide before
you attempt to connect or operate the player.
After you have reviewed the contents of this manual, we suggest that you makeall system connections before
you attempt to operate the unit .
• Checking the accessories
After opening the cover of the packing box, check that the
following accessories are included.
•AC Power
cord
SM-11 S1 (U.S.A.)
SM-11S1 (Europe)
•User
Guide
•Warranty Card (U.S.A)
(U.S.A. x
1, Canada x 1)
ANOTE ABOUT RECYCLING
This product's packaging materials are recyclable
and can be reused. This product and the accessories
packed together are the applicable product to the WEEE
directive except batteries.
Please dispose of any materials
in accordance with your
local recycling regulations.
When discarding the unit, comply with your local rules
or regulations.
Batteries should never be thrown away or incinerated
but disposed of
in accordance with your local regulations
concerning chemical wastes.
[~C_O_N_TE_N_T_S ~]
FEATURES 2
BEFORE USING 3
EQUIPMENT MAINS WORKING SETIING 3
COPYRIGHT 3
INAPPROPRIATE PLACES FOR INSTALLATION 3
NAMES AND FUNCTIONS OF PARTS 4
FRONT PANEL 4
DiSPLAy 5
REAR PANEL 6
CONNECTIONS 7
BALANCED JACKS 7
WIRING SPEAKER CABLE 8
SPEAKER POSITIONING FOR SUPER AUDIO MULTI-CHANNEL SOUND 17
CONNECTING THE POWER SUPPLY 17
HOWTO USE AND SET FEATURES 18
HOW TO USE THE METER MODE BUTION (DIGITAL POWER METER) 18
BALANCED INPUT/UNBALANCED INPUT GAIN
SETIINGS 18
AMP MODE 19
HOW
TO OPERATE THE SIDE ILLUMINATION 19
REMOTE POWER CONTROL 20
TROUBLESHOOTING 21
SPECIFICATIONS &DIMENSIONAL DRAWiNGS 22
OTHERS 23

I [~F_E_AT_U_R_ES ~]
lDa .. anlZ
(5
Q-
0
.... ":"" ...
~,
(;)
<:>
oPo,;".'"
.....;.::".0
0e
0)
'\. /'\. /
This unit was developed with many of the same functions as
the flagship model MA-9S2 and with a2-channel function,
without compromising the sound quality.
•HDAM-SA3
The HDAM-SA3 is an amp module equipped with anew circuit
that has further improved stability from the previous HDAM-SA
and HDAM-SA2.
The HDAM-SA3 is
an essential part of this unit's amp module,
incorporated into many components such as the voltage-
current converter and input buffer.
•Dual Structure Voltage Amplifier
+Power Buffer Amplifier
Speakers with powerful magnetic circuits have large back
electromotive force, and are therefore not easy to drive.
Therefore,
in the same way as the MA-9S2, this unit was
developed with the dual structure of avoltage amplifier and
power buffer amplifier so that there is
no influence from the
back electromagnetic force.
•Differential InputVoltage Amplifier
The current feedback voltage amplifier that is equipped with
the newly developed HDAM-SA3 and features differential
input amplifies the voltage of the balanced input signals and
unbalanced input signals.
Furthermore,
it can also be switched between gain conversion
or stereo mode to BTL monaural mode.
• New Current Feedback Power Buffer Amplifier
The power buffer amplifier that powerfully drives the speakers
incorporates avoltage-current conversion circuit that contains
anewly developed Complimentary Cascade Push-pull Circuit,
which greatly increases stability.
Furthermore, the combination of the Wilson current mirror
circuit and Cascade bootstrap circuit
in the current amplification
circuit provides power amplification with low distortion
in the
super-high frequency.
2
•Improved Instantaneous Current Delivery
Capacity
The final stage of the power buffer amp has aLAPT special
power transistor parallel push-pull construction to improve
delivery, and the block capacitor and power buffer amplifier
are unified.
Also, the block capacitor and unified power buffer enable the
reduction of the current loop path, creating superior channel
separation.
•Input Buffer
Each input has its own input buffer that directly uses HDAM-
SA3 technology to prevent interference between channels or
input sources.
•BALANCED/UNBALANCED Individual Gain
Setting Function
The gain can be set individually for BALANCED input and
UNBALANCED input according to the intended use.
•Digital Power Meter
The actual output power can be indicated on the display by
detecting the speaker output voltage and output current.
Considering overall sound quality, aPLD (programmable logic
device) is used instead of DSP for the digital processing to
minimize the amount of digital noise.
•Remote Power Control
The Power to this unit can be switched ON/OFF in sync with
the Marantz
SC-11 S1stereo control amplifierON/OFFcontrol
using the remote power control function.
The connection with the SC-11 S1 is made without aground
loop being formed, therefore sound quality is not adversely
affected.
I [~F_E_AT_U_R_ES ~]
lDa .. anlZ
(5
Q-
0
.... ":"" ...
~,
(;)
<:>
oPo,;".'"
.....;.::".0
0e
0)
'\. /'\. /
This unit was developed with many of the same functions as
the flagship model MA-9S2 and with a2-channel function,
without compromising the sound quality.
•HDAM-SA3
The HDAM-SA3 is an amp module equipped with anew circuit
that has further improved stability from the previous HDAM-SA
and HDAM-SA2.
The HDAM-SA3 is
an essential part of this unit's amp module,
incorporated into many components such as the voltage-
current converter and input buffer.
•Dual Structure Voltage Amplifier
+Power Buffer Amplifier
Speakers with powerful magnetic circuits have large back
electromotive force, and are therefore not easy to drive.
Therefore,
in the same way as the MA-9S2, this unit was
developed with the dual structure of avoltage amplifier and
power buffer amplifier so that there is
no influence from the
back electromagnetic force.
•Differential InputVoltage Amplifier
The current feedback voltage amplifier that is equipped with
the newly developed HDAM-SA3 and features differential
input amplifies the voltage of the balanced input signals and
unbalanced input signals.
Furthermore,
it can also be switched between gain conversion
or stereo mode to BTL monaural mode.
• New Current Feedback Power Buffer Amplifier
The power buffer amplifier that powerfully drives the speakers
incorporates avoltage-current conversion circuit that contains
anewly developed Complimentary Cascade Push-pull Circuit,
which greatly increases stability.
Furthermore, the combination of the Wilson current mirror
circuit and Cascade bootstrap circuit
in the current amplification
circuit provides power amplification with low distortion
in the
super-high frequency.
2
•Improved Instantaneous Current Delivery
Capacity
The final stage of the power buffer amp has aLAPT special
power transistor parallel push-pull construction to improve
delivery, and the block capacitor and power buffer amplifier
are unified.
Also, the block capacitor and unified power buffer enable the
reduction of the current loop path, creating superior channel
separation.
•Input Buffer
Each input has its own input buffer that directly uses HDAM-
SA3 technology to prevent interference between channels or
input sources.
•BALANCED/UNBALANCED Individual Gain
Setting Function
The gain can be set individually for BALANCED input and
UNBALANCED input according to the intended use.
•Digital Power Meter
The actual output power can be indicated on the display by
detecting the speaker output voltage and output current.
Considering overall sound quality, aPLD (programmable logic
device) is used instead of DSP for the digital processing to
minimize the amount of digital noise.
•Remote Power Control
The Power to this unit can be switched ON/OFF in sync with
the Marantz
SC-11 S1stereo control amplifierON/OFFcontrol
using the remote power control function.
The connection with the SC-11 S1 is made without aground
loop being formed, therefore sound quality is not adversely
affected.

~-h-;sB-s-e~-ti-oF-n -~-us-t-~-e-~-a-d U-b-e~-or-el_~-nY-~-o-n-ne-c-tio-n-i-S -m-ad-e-t-o-------------------~} I
the mains supply.
o
'0
'0
[EQUIPMENT MAINSWORKING ]
~S_E_TT_IN_G ~
Your Marantz product has been prepared to comply with the
household power
and safety requirements that exist in your area.
Power requirements (U.S.A.) AC 120V 60Hz
-Power requirements (Europe) AC 230V
SO/60Hz
0.2 m (8 ins.) or more
';=:L==""F=;===::!::::=====r""F==~0~.2 m (8 ins.)
or more
0.2 m (8 ins.) or more
(COPYRIGHT )
Recording and playback of any material may require consent.
For further information refer to the following:
Copyright Act 1956
-Dramatic and Musical Performers Act 1958
-Performers Protection Acts 1963 and 1972
-Any subsequent statutory enactments and orders
INAPPROPRIATE PLACES FOR
INSTALLATION
To keep yourplayer in perfectworking orderfor the longest possible
time, avoid installing the player
in the following locations.
Wherever
it will be exposed to direct sunlight
Wherever
it will be close to aheater or other heat-radiating
appliance
Wherever the humidity
is high or ventilation is poor
Wherever it is very dusty
Wherever it will be subject to vibration
On top of arickety stand or in an unstable location which is
tilted at an angle
In an audio rack with little space atthe top and bottom or other
location where the heat dissipation will be obstructed
To ensure proper heat dissipation, install the player while
leaving clearances between the player and wall or other
components,
as shown in the figure below.
• Do not place objects on top
•Refrain from placing any objects on top of the player.
•Cautions on handling power cord
• Do not touch the power cord with wet hands.
•When disconnecting the power cord, always make sure that
you take hold of the plug. Yanking out or bending the cord
can damage
it and/or cause electric shocks or afire.
•Get into the habit of disconnecting the power plug before
leaving home.
•Do not touch hot spots during and
Immediately After Use
During and immediately after use, the unit is hot in areas other
than the controls and rear panel connection jacks.
Do not touch
hot spots and especially the top panel. Contact with hot areas
can cause burns.
3
~-h-;sB-s-e~-ti-oF-n -~-us-t-~-e-~-a-d U-b-e~-or-el_~-nY-~-o-n-ne-c-tio-n-i-S -m-ad-e-t-o-------------------~} I
the mains supply.
o
'0
'0
[EQUIPMENT MAINSWORKING ]
~S_E_TT_IN_G ~
Your Marantz product has been prepared to comply with the
household power
and safety requirements that exist in your area.
Power requirements (U.S.A.) AC 120V 60Hz
-Power requirements (Europe) AC 230V
SO/60Hz
0.2 m (8 ins.) or more
';=:L==""F=;===::!::::=====r""F==~0~.2 m (8 ins.)
or more
0.2 m (8 ins.) or more
(COPYRIGHT )
Recording and playback of any material may require consent.
For further information refer to the following:
Copyright Act 1956
-Dramatic and Musical Performers Act 1958
-Performers Protection Acts 1963 and 1972
-Any subsequent statutory enactments and orders
INAPPROPRIATE PLACES FOR
INSTALLATION
To keep yourplayer in perfectworking orderfor the longest possible
time, avoid installing the player
in the following locations.
Wherever
it will be exposed to direct sunlight
Wherever
it will be close to aheater or other heat-radiating
appliance
Wherever the humidity
is high or ventilation is poor
Wherever it is very dusty
Wherever it will be subject to vibration
On top of arickety stand or in an unstable location which is
tilted at an angle
In an audio rack with little space atthe top and bottom or other
location where the heat dissipation will be obstructed
To ensure proper heat dissipation, install the player while
leaving clearances between the player and wall or other
components,
as shown in the figure below.
• Do not place objects on top
•Refrain from placing any objects on top of the player.
•Cautions on handling power cord
• Do not touch the power cord with wet hands.
•When disconnecting the power cord, always make sure that
you take hold of the plug. Yanking out or bending the cord
can damage
it and/or cause electric shocks or afire.
•Get into the habit of disconnecting the power plug before
leaving home.
•Do not touch hot spots during and
Immediately After Use
During and immediately after use, the unit is hot in areas other
than the controls and rear panel connection jacks.
Do not touch
hot spots and especially the top panel. Contact with hot areas
can cause burns.
3

I[NAMES AND FUNCTIONS OF PARTS
(FRONT PANEL )
~
Dllarantz
Q"£6:
00
I"",,·,
,.....
'--
·~ .. I
,....-~
~-..,
s ... "f ....
-~"
(,))
(;)
I
'"
Ii"
'\
/
-=
~
~
7892345
]
CD POWER ON/OFF Switch
This switch turns power to the SM-11 S1 ON and OFF.
When pressed, power is activated and the blue indicator
in the display C1J lights up. Pressing the switch again turns
the power
OFF.
CV Display
The monitor displays the output power to the speakers,
and setting status of the various setting modes.
®UNBALANCED Input Selection Button
This button switches the input signal from the
UNBALANCED terminal on the rear panel ON/OFF.
Press this button for 3seconds or more to set the gain
settings for the input signal from the UNBALANCED
terminal. For instructions on BALANCED
INPUT I
UNBALANCED INPUT GAIN SETTING, see pg. 18.
@Balanced Input Selection Button
This button switches the input signal from the BALANCED
terminal on the rear panel ON/OFF.
Press this button for 3seconds or more to set the gain
settings for the input signal from the BALANCED terminal.
For instructions
on BALANCED INPUTIUNBALANCED
INPUT GAIN SETTING, see pg. 18.
4
®METER MODE Button
This button changes the display to digital power meter
display mode. For more information on HOW
TO USE
THE METER BUTTON (DIGITAL POWER METER), see
pg.18.
®Illumination Lamp
The illumination lamp casts ablue light over the switches
and buttons.
It can be turned ON and OFF with the DISPLAY button.
For instructions on HOW TO OPERATE
THE SIDE
ILLUMINATION, see pg. 19.
(J) DISPLAY Button
This button turns the display and side illumination ON and
OFF. For instructions on HOW TO OPERATE THE SIDE
ILLUMINATION, see pg. 19.
®SPEAKERS 1Button
This button switches the speaker output signal from the
SPEAKERS 1terminal
on the rear panel ON/OFF.
®SPEAKERS 2Button
This button switches the speaker output signal from the
SPEAKERS 2terminal
on the rear panel ON/OFF.
I[NAMES AND FUNCTIONS OF PARTS
(FRONT PANEL )
~
Dllarantz
Q"£6:
00
I"",,·,
,.....
'--
·~ .. I
,....-~
~-..,
s ... "f ....
-~"
(,))
(;)
I
'"
Ii"
'\
/
-=
~
~
7892345
]
CD POWER ON/OFF Switch
This switch turns power to the SM-11 S1 ON and OFF.
When pressed, power is activated and the blue indicator
in the display C1J lights up. Pressing the switch again turns
the power
OFF.
CV Display
The monitor displays the output power to the speakers,
and setting status of the various setting modes.
®UNBALANCED Input Selection Button
This button switches the input signal from the
UNBALANCED terminal on the rear panel ON/OFF.
Press this button for 3seconds or more to set the gain
settings for the input signal from the UNBALANCED
terminal. For instructions on BALANCED
INPUT I
UNBALANCED INPUT GAIN SETTING, see pg. 18.
@Balanced Input Selection Button
This button switches the input signal from the BALANCED
terminal on the rear panel ON/OFF.
Press this button for 3seconds or more to set the gain
settings for the input signal from the BALANCED terminal.
For instructions
on BALANCED INPUTIUNBALANCED
INPUT GAIN SETTING, see pg. 18.
4
®METER MODE Button
This button changes the display to digital power meter
display mode. For more information on HOW
TO USE
THE METER BUTTON (DIGITAL POWER METER), see
pg.18.
®Illumination Lamp
The illumination lamp casts ablue light over the switches
and buttons.
It can be turned ON and OFF with the DISPLAY button.
For instructions on HOW TO OPERATE
THE SIDE
ILLUMINATION, see pg. 19.
(J) DISPLAY Button
This button turns the display and side illumination ON and
OFF. For instructions on HOW TO OPERATE THE SIDE
ILLUMINATION, see pg. 19.
®SPEAKERS 1Button
This button switches the speaker output signal from the
SPEAKERS 1terminal
on the rear panel ON/OFF.
®SPEAKERS 2Button
This button switches the speaker output signal from the
SPEAKERS 2terminal
on the rear panel ON/OFF.

[~_N_A_M_E_S_A_N_D_F_UN_C_T_I_O_N_S_O_F_P._'A_R_T_S ------------~] I
(DISPLAY )@Power Indicator
This indicator is lit ablue color while power to the unit is
ON.
•Input signal ON/OFF switch, gain setting display
u r'~ E: 1=1 LH ['1 CE
E: HLH r-K: E [:1
Q]) Display Panel
•Speaker Output Power Display
In STEREO Mode In BTL Mode
•Meter mode setting display
r---;-:-=-=-=~---,
METER METER
.;
1,")
"
•Display when protective circuit trips
PF.:DTl::.CT
@STANDBY Indicator
When using the remote power control function, this
indicator flashes when the unit
is in standby mode.
Also, this indicator flashes
if aprotective circuit trips to
give notification of amalfunction.
5
[~_N_A_M_E_S_A_N_D_F_UN_C_T_I_O_N_S_O_F_P._'A_R_T_S ------------~] I
(DISPLAY )@Power Indicator
This indicator is lit ablue color while power to the unit is
ON.
•Input signal ON/OFF switch, gain setting display
u r'~ E: 1=1 LH ['1 CE
E: HLH r-K: E [:1
Q]) Display Panel
•Speaker Output Power Display
In STEREO Mode In BTL Mode
•Meter mode setting display
r---;-:-=-=-=~---,
METER METER
.;
1,")
"
•Display when protective circuit trips
PF.:DTl::.CT
@STANDBY Indicator
When using the remote power control function, this
indicator flashes when the unit
is in standby mode.
Also, this indicator flashes
if aprotective circuit trips to
give notification of amalfunction.
5

I[NAMES
AND FUNCTIONS OF PARTS
(REAR PANEL
]
@
tJ
lIl'mIlD' lIiI·rmm·B'!l.!!!~ @
TRIGGER IN r::
ON
@@ mO
FF
@
@ @
@
@
SYSTEM 1OR SYSTEM 2 ; 4 - 8 OHMS BTL; 8OHMS
SYSTEM 1AND SYSTEM 2 : 8·16 OHMS BTL: 16 OHMS
r=STEREO
Iron
!YO @
@
\~~,7
B
A
@
tJ
@
~F=:::::;;;::::::::::::::==~======:::::::;@;;::=================:I~~~
='= @ @
rnaranlZ
MODEL NO. SM·1151
@UNBALANCED INPUT Jack
These jacks are for connecting to the unbalanced output
jacks of acontrol amplifier.
In BTL mode, the Lch input
terminal
is used.
@BALANCED INPUT Jacks
These jacks are for connecting to the balanced output
jacks of acontrol amplifier.
In BTL mode, the Lch input
terminal
is used.
©SPEAKER SYSTEMS OutputTerminals
These jacks are for connecting to aspeaker system.
You can connect 2speaker systems to the SM-11 S1,
SPEAKER SYSTEM 1and
2. Speaker output can be
turned ON/OFF from the SPEAKERS 1 / 2 buttons
on
the front panel.
When using
BLT mode, connect the speaker +side to the
Lch +jack, and the speaker -side to the Rch +jack.
©REMOTE POWER CONTROL Jacks
(TRIGGER IN)
This jack controls this unit's power ON/OFF in sync with
the Marantz
SC-11 S1 control amplifier ON/OFF control.
Connect to the SC-11
S1 TRIGGER OUT jack using a
commercially available cable.
For more information on REMOTE POWER CONTROL,
see pg. 20.
~ REMOTE POWER CONTROL ON/OFF
Switch
ON: Set to control this unit's powerON/OFF in sync with
the Marantz
SC-11 S1 control amplifier ON/OFF
control.
OFF: Set to use the POWER ON/OFF switch on the
front panel of the unit to switch the unit's power
ON/OFF.
® AC IN Power Cable Connection Socket
Connectthis socket to the power outlet using the included
power cable.
@AMP MODE Switch
STEREO: Set to use the SC-11 S1 as an ordinary stereo
power amplifier.
BTL: Set to connect astereo amp
by BTL and use
this unit as a monaural power amp.
For more information on AMP MODE, see pg. 19.
Caution:
Always make sure that the power is OFF before
switching this switch.
6
I[NAMES
AND FUNCTIONS OF PARTS
(REAR PANEL
]
@
tJ
lIl'mIlD' lIiI·rmm·B'!l.!!!~ @
TRIGGER IN r::
ON
@@ mO
FF
@
@ @
@
@
SYSTEM 1OR SYSTEM 2 ; 4 - 8 OHMS BTL; 8OHMS
SYSTEM 1AND SYSTEM 2 : 8·16 OHMS BTL: 16 OHMS
r=STEREO
Iron
!YO @
@
\~~,7
B
A
@
tJ
@
~F=:::::;;;::::::::::::::==~======:::::::;@;;::=================:I~~~
='= @ @
rnaranlZ
MODEL NO. SM·1151
@UNBALANCED INPUT Jack
These jacks are for connecting to the unbalanced output
jacks of acontrol amplifier.
In BTL mode, the Lch input
terminal
is used.
@BALANCED INPUT Jacks
These jacks are for connecting to the balanced output
jacks of acontrol amplifier.
In BTL mode, the Lch input
terminal
is used.
©SPEAKER SYSTEMS OutputTerminals
These jacks are for connecting to aspeaker system.
You can connect 2speaker systems to the SM-11 S1,
SPEAKER SYSTEM 1and
2. Speaker output can be
turned ON/OFF from the SPEAKERS 1 / 2 buttons
on
the front panel.
When using
BLT mode, connect the speaker +side to the
Lch +jack, and the speaker -side to the Rch +jack.
©REMOTE POWER CONTROL Jacks
(TRIGGER IN)
This jack controls this unit's power ON/OFF in sync with
the Marantz
SC-11 S1 control amplifier ON/OFF control.
Connect to the SC-11
S1 TRIGGER OUT jack using a
commercially available cable.
For more information on REMOTE POWER CONTROL,
see pg. 20.
~ REMOTE POWER CONTROL ON/OFF
Switch
ON: Set to control this unit's powerON/OFF in sync with
the Marantz
SC-11 S1 control amplifier ON/OFF
control.
OFF: Set to use the POWER ON/OFF switch on the
front panel of the unit to switch the unit's power
ON/OFF.
® AC IN Power Cable Connection Socket
Connectthis socket to the power outlet using the included
power cable.
@AMP MODE Switch
STEREO: Set to use the SC-11 S1 as an ordinary stereo
power amplifier.
BTL: Set to connect astereo amp
by BTL and use
this unit as a monaural power amp.
For more information on AMP MODE, see pg. 19.
Caution:
Always make sure that the power is OFF before
switching this switch.
6

G) The BALANCED jacks on this unit are equipped with XLR
connectors that are widely used on professional equipment.
Their features are listed below.
•The 3pin construction enables the musical signal to be
transmitted as abalanced signal, with little effect from
external noise
•Thedetachable locking mechanism minimizes connector
play and enhances connection reliability.
CD The XLR connector for professional use is internally wired
in either of the following two systems.
1. USA system (Pin CD =COLD, Pin @=HOT)
COL~,L...)_' _-'----"--'
2. European system (Pin CD = HOT, Pin @=COLD)
~~o-nC:ne~~:io~n N~ex:":aNm~p:"::I~=S:"":~=-_5---':~~,:=-~-=xa--~~p-,eS--=-s O-f-co-n-ne-ct-in-gt -h-is-un-it--(-B-A-L-A-N-C-E-O-J-A-C-K-S--------: I
to aMarantz SC-11 S1 stereo control amplifier.
Refer to these connection exampleswhen connecting to control
amplifiers other than the SC-11 S1.
Caution:
•Do not connect the power cord of this amplifier or any of
the other components to the power supply until all of the
connections are completed.
•Insert the plugs of the connections cords firmly into the
connecting jacks. Incorrect insertion may cause noise.
Connect the wires correctly to the L(left) and R(right)
channels. The red jack is the R(right) channel, and the
white jack is the L(left) channel.
•Make sure that input and output are connected correctly.
Refer also to the instruction manuals of components to
connect equipment correctly.
@This unit uses the 1. USA system.
When apreamp or main amplifier adopting the European
system is connected using acable with XLR balanced
connectors, the reproduced signal may be inverted of
phase.
In this case, refer to "ANALOG OUTPUT CONNECTOR
PHASE SWITCHING", and set so that the correct phase
is used.
7
G) The BALANCED jacks on this unit are equipped with XLR
connectors that are widely used on professional equipment.
Their features are listed below.
•The 3pin construction enables the musical signal to be
transmitted as abalanced signal, with little effect from
external noise
•Thedetachable locking mechanism minimizes connector
play and enhances connection reliability.
CD The XLR connector for professional use is internally wired
in either of the following two systems.
1. USA system (Pin CD =COLD, Pin @=HOT)
COL~,L...)_' _-'----"--'
2. European system (Pin CD = HOT, Pin @=COLD)
~~o-nC:ne~~:io~n N~ex:":aNm~p:"::I~=S:"":~=-_5---':~~,:=-~-=xa--~~p-,eS--=-s O-f-co-n-ne-ct-in-gt -h-is-un-it--(-B-A-L-A-N-C-E-O-J-A-C-K-S--------: I
to aMarantz SC-11 S1 stereo control amplifier.
Refer to these connection exampleswhen connecting to control
amplifiers other than the SC-11 S1.
Caution:
•Do not connect the power cord of this amplifier or any of
the other components to the power supply until all of the
connections are completed.
•Insert the plugs of the connections cords firmly into the
connecting jacks. Incorrect insertion may cause noise.
Connect the wires correctly to the L(left) and R(right)
channels. The red jack is the R(right) channel, and the
white jack is the L(left) channel.
•Make sure that input and output are connected correctly.
Refer also to the instruction manuals of components to
connect equipment correctly.
@This unit uses the 1. USA system.
When apreamp or main amplifier adopting the European
system is connected using acable with XLR balanced
connectors, the reproduced signal may be inverted of
phase.
In this case, refer to "ANALOG OUTPUT CONNECTOR
PHASE SWITCHING", and set so that the correct phase
is used.
7

]
Your speakersystem needsto meet the following requirements.
If speakers that do not meet the following requirements are
used, the amplifier protective circuit may trip, and sounds will
not playback correctly.
In certain cases, damage may also be
caused to the amplifier and speaker system.
•If using 1set of speakers, total speaker impedance must be
4Q or more.
•
If using 2sets of speakers, total speaker impedance must
be
8Q or more.
•When using the speaker system in BTL mode, use aspeaker
system that has
an impedance of 8Q or higher.
Notes:
• To prevent damageto circuitry, do not let the bare speaker
wires touch each otherand do not letthem touch any metal
part of this unit.
• Do not touch the speaker terminals when the power is on.
It may cause you to receive
an electric shocks.
•Do not connect more than one speaker cable to one
speaker terminal. Doing so may damage this unit.
Be sure to connect the positive and negative cables for
the speaker properly. If they are miss-connected, the
signal phase will be reversed and the signal quality will
be corrupted.
Turn clockwise to
tighten.
Turn clockwise to
tighten.
Twist conductors.
~
<J:jssssss~
(6;;;
Peel off the edge
of cable.
Turn counter- Insert conductor.
clockwise to loosen.
Turn counter- Insert conductor
clockwise
to loosen. of cable.
Cut the coating
of cable.
Approx.1 em
1-------+1
(obdb=
•Wiring with "Y" style terminal
•Wiring with speaker cable.
•Peel off the coating of speaker cable as shown below.
I[CONNECTIONS
(WIRING SPEAKER CABLE
s
]
Your speakersystem needsto meet the following requirements.
If speakers that do not meet the following requirements are
used, the amplifier protective circuit may trip, and sounds will
not playback correctly.
In certain cases, damage may also be
caused to the amplifier and speaker system.
•If using 1set of speakers, total speaker impedance must be
4Q or more.
•
If using 2sets of speakers, total speaker impedance must
be
8Q or more.
•When using the speaker system in BTL mode, use aspeaker
system that has
an impedance of 8Q or higher.
Notes:
• To prevent damageto circuitry, do not let the bare speaker
wires touch each otherand do not letthem touch any metal
part of this unit.
• Do not touch the speaker terminals when the power is on.
It may cause you to receive
an electric shocks.
•Do not connect more than one speaker cable to one
speaker terminal. Doing so may damage this unit.
Be sure to connect the positive and negative cables for
the speaker properly. If they are miss-connected, the
signal phase will be reversed and the signal quality will
be corrupted.
Turn clockwise to
tighten.
Turn clockwise to
tighten.
Twist conductors.
~
<J:jssssss~
(6;;;
Peel off the edge
of cable.
Turn counter- Insert conductor.
clockwise to loosen.
Turn counter- Insert conductor
clockwise
to loosen. of cable.
Cut the coating
of cable.
Approx.1 em
1-------+1
(obdb=
•Wiring with "Y" style terminal
•Wiring with speaker cable.
•Peel off the coating of speaker cable as shown below.
I[CONNECTIONS
(WIRING SPEAKER CABLE
s

[ __ C_O_N_N_E_C_T_IO_N_S JI
•Connection Example1 :Basic Connection for Normal Stereo Playback
CD Player
To power outlet
Control Amplifier
SC-11S1
~~II
o@
r;::~:'~o
IU"""":,,,,~---~- Set to STEREO
@ @JI
\ 7
II II
,@
To LINE OUT jack
@
@
Unbalanced connection or balanced connection
@
@
•
@ @
-~-To power outlet
@
@
Set to STEREO Stereo Power Amplifier
SM-11S1
1======:::::::;:::=================:;::;:::==:=
..
@
Front R ch
Speaker Front L
ch
Speaker 9
[ __ C_O_N_N_E_C_T_IO_N_S JI
•Connection Example1 :Basic Connection for Normal Stereo Playback
CD Player
To power outlet
Control Amplifier
SC-11S1
~~II
o@
r;::~:'~o
IU"""":,,,,~---~- Set to STEREO
@ @JI
\ 7
II II
,@
To LINE OUT jack
@
@
Unbalanced connection or balanced connection
@
@
•
@ @
-~-To power outlet
@
@
Set to STEREO Stereo Power Amplifier
SM-11S1
1======:::::::;:::=================:;::;:::==:=
..
@
Front R ch
Speaker Front L
ch
Speaker 9

I[CONNECTIONS ]
•Connection Example 2: Upgraded.version of connection example 1using bi-wiring
connections
Use bi-wiring connections to connect the unit and speaker system with 2sets of speaker cables.
Before connecting the speaker system using bi-wiring, check to make sure that the speaker system supports bi-wiring.
•Bi-Wiring Connection
Bi-wiring connection is atechnique for improving sound quality by separately connecting the low and mid/high jacks of the speaker
to the amplifier using separate cables.
By using separate cables for low and mid/high sounds, the return current generated in the low speaker causes little interference
with the mid/high speaker.
To power outlet
@I
~~'CI:j~ I
~ II
r,:STEAEO
u ... ·· ..... ~~---~-Set to STEREO
@ JI
@
Control Amplifier
SC-11S1
@
Stereo Power Amplifier
SM-11S1
@
@
Set to STEREO
SYST£M' OR SYSTEM 2; •.• 0"'5 BTL, • OHMS
SYSTEM 1AND SYSTEM 2 : 1-16 OHMS BTL: 1& OHMS
&@
@
@7\
.. ..
..
..
@
Remove Speaker Remove Remove Speaker Remove
shorting bar R ch shorting bar shorting bar L ch shorting bar
Set the BALANCED Button and SPEAKER 1,2 buttons on the SM-11 S1 ON. I
10
I[CONNECTIONS ]
•Connection Example 2: Upgraded.version of connection example 1using bi-wiring
connections
Use bi-wiring connections to connect the unit and speaker system with 2sets of speaker cables.
Before connecting the speaker system using bi-wiring, check to make sure that the speaker system supports bi-wiring.
•Bi-Wiring Connection
Bi-wiring connection is atechnique for improving sound quality by separately connecting the low and mid/high jacks of the speaker
to the amplifier using separate cables.
By using separate cables for low and mid/high sounds, the return current generated in the low speaker causes little interference
with the mid/high speaker.
To power outlet
@I
~~'CI:j~ I
~ II
r,:STEAEO
u ... ·· ..... ~~---~-Set to STEREO
@ JI
@
Control Amplifier
SC-11S1
@
Stereo Power Amplifier
SM-11S1
@
@
Set to STEREO
SYST£M' OR SYSTEM 2; •.• 0"'5 BTL, • OHMS
SYSTEM 1AND SYSTEM 2 : 1-16 OHMS BTL: 1& OHMS
&@
@
@7\
.. ..
..
..
@
Remove Speaker Remove Remove Speaker Remove
shorting bar R ch shorting bar shorting bar L ch shorting bar
Set the BALANCED Button and SPEAKER 1,2 buttons on the SM-11 S1 ON. I
10

[CONNECTIONS ]I
•Connection Example 3: Connection for using connecting 2SM-11S1s in BTL mode for
stereo playback
Note:
When using this unit in BTL mode, ensure that the speakers have an impedance of more than 8Q.
CD Player
" " "
@
@
@
@
@
@
\ 7
@
~-::-- To power outlet
~ ~ ~II
l.S~--~--Set to STEREO
@ @ JI
@
\/
@
~ -~;Jt n r'iii1 0
L~~ ~~=ml:
c:::; ..........:. """<""~~---"J
R ch To BALANCED
LINE OUT jack
ISM-11S1 for Rch I
®
_--Set to BTL
@
Speaker Rch
@
@
@
@•
Speaker Lch
Set the BALANCED button and SPEAKER 1button on the front panel of the SM-11
S1 sfor both the left
channel and right channel to
ON
[CONNECTIONS ]I
•Connection Example 3: Connection for using connecting 2SM-11S1s in BTL mode for
stereo playback
Note:
When using this unit in BTL mode, ensure that the speakers have an impedance of more than 8Q.
CD Player
" " "
@
@
@
@
@
@
\ 7
@
~-::-- To power outlet
~ ~ ~II
l.S~--~--Set to STEREO
@ @ JI
@
\/
@
~ -~;Jt n r'iii1 0
L~~ ~~=ml:
c:::; ..........:. """<""~~---"J
R ch To BALANCED
LINE OUT jack
ISM-11S1 for Rch I
®
_--Set to BTL
@
Speaker Rch
@
@
@
@•
Speaker Lch
Set the BALANCED button and SPEAKER 1button on the front panel of the SM-11
S1 sfor both the left
channel and right channel to
ON

I[CONNECTIONS ]
•Connection Example
4: Stereo Complete Bi-amp Connection
1. Connect 2Marantz SC-11 S1 by EC.B.S. for synchronized control.
For EC.B.S. connection, connect with commercially available cables with monaural
¢? monaural miniplugs or stereo ¢? stereo
miniplugs as described
in F.e.B.S. (pg. 26) in the SC-11 S1 instruction manual.
2. Refer to the SC-11 S1 instruction manual (pg. 27) and set the SC-11 S1 ID numbers.
3. Connect the analog output of the CD player etc. to the Lch inputjacks of both pre-amps. As both pre-amps operate as monaural
pre-amps
in BI-AMP mode, do not use the Rchannel of the input jacks for the SC-11 S1 .
•About Complete Bi-Amp
Proposed by Marantz, the complete bi-amp connection is an advanced technique that enhances sound quality.The low and mid/high
amplifiers are separate and independent of the preamplifier, therefore interference between low and mid/high sounds is reduced
to aminimum. As aresult, awide sound environment can be reproduced.
Note:
Speaker systems that can be connected using complete bi-amp must support bi-amp connections. Before connecting your
speaker system, check the speaker system instruction manual, or contact the speaker manufacturer to check whether the
speakers support bi-amp connections.
Miniplug connecting cord x
2(commercially available)
F.C.B.S.--+
ILch for SC-11S1
•Set to 10 1
®
o
®
®
Remove shorting Speaker L ch
bar
®®
®
Remove shorting
bar
®
®
To power outlet
"""":'~----~- Set to BI-AMP
F.C.B.S. +--
-~-To power outlet
®
o
®
®
ISet the BALANCED button and SPEAKER 1button on the front panel of the SM-11S1s for both the left channel and right channel to ON I
1.2
I[CONNECTIONS ]
•Connection Example
4: Stereo Complete Bi-amp Connection
1. Connect 2Marantz SC-11 S1 by EC.B.S. for synchronized control.
For EC.B.S. connection, connect with commercially available cables with monaural
¢? monaural miniplugs or stereo ¢? stereo
miniplugs as described
in F.e.B.S. (pg. 26) in the SC-11 S1 instruction manual.
2. Refer to the SC-11 S1 instruction manual (pg. 27) and set the SC-11 S1 ID numbers.
3. Connect the analog output of the CD player etc. to the Lch inputjacks of both pre-amps. As both pre-amps operate as monaural
pre-amps
in BI-AMP mode, do not use the Rchannel of the input jacks for the SC-11 S1 .
•About Complete Bi-Amp
Proposed by Marantz, the complete bi-amp connection is an advanced technique that enhances sound quality.The low and mid/high
amplifiers are separate and independent of the preamplifier, therefore interference between low and mid/high sounds is reduced
to aminimum. As aresult, awide sound environment can be reproduced.
Note:
Speaker systems that can be connected using complete bi-amp must support bi-amp connections. Before connecting your
speaker system, check the speaker system instruction manual, or contact the speaker manufacturer to check whether the
speakers support bi-amp connections.
Miniplug connecting cord x
2(commercially available)
F.C.B.S.--+
ILch for SC-11S1
•Set to 10 1
®
o
®
®
Remove shorting Speaker L ch
bar
®®
®
Remove shorting
bar
®
®
To power outlet
"""":'~----~- Set to BI-AMP
F.C.B.S. +--
-~-To power outlet
®
o
®
®
ISet the BALANCED button and SPEAKER 1button on the front panel of the SM-11S1s for both the left channel and right channel to ON I
1.2

[~_C_O_N_N_E_C_T_IO_N_S ~] I
CD Player
<II <II
<II
R
+-1
,.
To power outlet
@
@
-~- To power outlet
ACIN
@
@
cf·~~
~ ~II
..._---- ......-Set to BI-AMP
@ JI
@
@
@
SYSTEM 1 OR SYSTEM:I: .. ·, otitiS BTl:' OHMS
SYSTEM 1AND SYSTEM:I :8-16 otlMS 8Tl.: 11 OHMS
@
@
~F.C.B.S.
ISM-11S1 for Rch
•Set to ID 2
IRch for SC-11S1
@
--. F.C.B.S.
Remove shorting Speaker Rch Remove shorting
bar bar
Set the BALANCED button and SPEAKER 1button
on the front panel of the SM-11 51 sfor both the Lch (left channel) and Rch (right channel) to ON I
13
[~_C_O_N_N_E_C_T_IO_N_S ~] I
CD Player
<II <II
<II
R
+-1
,.
To power outlet
@
@
-~- To power outlet
ACIN
@
@
cf·~~
~ ~II
..._---- ......-Set to BI-AMP
@ JI
@
@
@
SYSTEM 1 OR SYSTEM:I: .. ·, otitiS BTl:' OHMS
SYSTEM 1AND SYSTEM:I :8-16 otlMS 8Tl.: 11 OHMS
@
@
~F.C.B.S.
ISM-11S1 for Rch
•Set to ID 2
IRch for SC-11S1
@
--. F.C.B.S.
Remove shorting Speaker Rch Remove shorting
bar bar
Set the BALANCED button and SPEAKER 1button
on the front panel of the SM-11 51 sfor both the Lch (left channel) and Rch (right channel) to ON I
13

I[CONNECTIONS ] • Connection Example 5: Basic Connection for 5.1 Multi-Channel Playback
1. Three amplifiers are connected by F.C.B.S. for synchronized use. Refer to F.e.B.S. (pg. 26) in the SC-11 S1 instruction manual,
and prepare 3commercially available connecting cables.
2. Refer to the SC-11 S1 instruction manual (pg. 27) and set the SC-11 S1 ID numbers.
3. Connect the outputs of players that have 5.1 channel analog outputs to each of the three pre-amps.
4. When using asub-woofer with abuilt-in amplifier, see the sub-woofer's instruction manual.
For front UR
•Set to ID 1
@
SM-11S1 for
Front UR
_--- Set to STEREO
@
@ ACIN
To power outlet
Set
to STEREO
Miniplug connecting cord x
3(commercially available)
F.C.B.S.----+
F.C.B.S. +--
@
~
".":".~~,,,. ~ @1li1:.:i.' .. ,
\. ~ Jt: r:STEAEO SYSTEM 1Oil SYSTEM 2 : " •• OHMS BTL,. OHMS
'@ ~ Ir
BTL
SYSTEM 1AND SYSTEM 2 : 8-11 OHMS BTL: 1& OHMS
I ~'iI~ lti:9
@
..
@
@
@
@
~~-To power outlet
@
@
Front R ch
Speaker
14
Front L ch
Speaker
I[CONNECTIONS ] • Connection Example 5: Basic Connection for 5.1 Multi-Channel Playback
1. Three amplifiers are connected by F.C.B.S. for synchronized use. Refer to F.e.B.S. (pg. 26) in the SC-11 S1 instruction manual,
and prepare 3commercially available connecting cables.
2. Refer to the SC-11 S1 instruction manual (pg. 27) and set the SC-11 S1 ID numbers.
3. Connect the outputs of players that have 5.1 channel analog outputs to each of the three pre-amps.
4. When using asub-woofer with abuilt-in amplifier, see the sub-woofer's instruction manual.
For front UR
•Set to ID 1
@
SM-11S1 for
Front UR
_--- Set to STEREO
@
@ ACIN
To power outlet
Set
to STEREO
Miniplug connecting cord x
3(commercially available)
F.C.B.S.----+
F.C.B.S. +--
@
~
",,,:,,,~~,,,. ~ @1li1:.:i.' .. ,
\. ~ Jt: r:STEAEO SYSTEM 1Oil SYSTEM 2 : " •• OHMS BTL,. OHMS
'@ ~ Ir
BTL
SYSTEM 1AND SYSTEM 2 : 8-11 OHMS BTL: 1& OHMS
I ~'iI~ lti:9
@
..
@
@
@
@
~~-To power outlet
@
@
Front R ch
Speaker
14
Front L ch
Speaker