Marantz VP-11S1 User manual

Partner: Marantz
Model: VP-12S4
Device Type: DLP Projector
GENERAL INFORMATION
SIMPLWINDOWS NAME: Marantz VP-12S4
CATEGORY: TV/Video Projector
VERSION: 1.0
SUMMARY: This module provides control and true feedback for the Marantz VP-12S4.
GENERAL NOTES: This module provides control of the Marantz VP-12S4. It also provides true
feedback.
CRESTRON HARDWARE REQUIRED: C2COM, CNXCOM, C2COM-2/3, CNXCOM-2, ST-COM
SETUP OF CRESTRON HARDWARE: RS232
Baud: 9600
Parity: None
Data Bits: 8
Stop Bits: 1
VENDOR FIRMWARE: None
VENDOR SETUP: None
CABLE DIAGRAM: CNSP-143

Partner: Marantz
Model: VP-12S4
Device Type: DLP Projector
CONTROL:
From_Device$ S Serial signal to be routed from a 2-way serial com port.
Power_On/Standby/Toggle D Pulse to turn the power on and off.
Input_* D Pulse to select the desired input.
Input_step D Pulse to step through the inputs.
Mode_* D Pulse to select the picture mode.
Mode_step D Pulse to step through the modes.
Aspect_* D Pulse to select the desired aspect ratio.
Aspect_step D Pulse to step through the aspect ratios.
Video_Mute_* D Pulse to turn the video mute on and off.
Blanking_* D Pulse to select the blanking position.
Blanking_step D Pulse to step through the blanking positions.
RGB_sync_* D Pulse to select the desired RGB sync mode.
RGB_sync_step D Pulse to step through the RGB sync modes.
Patt_* D Pulse to turn the focus pattern on and off.
Black_IRE0/IRE7.5 D Pulse to select the black level for all inputs except for the HDMI input.
Black_Normal/Expand D Pulse to select the black level for the HDMI input.
Black_step D Pulse to step through the black levels.
Lamp_* D Pulse to select the lamp mode.
Iris_* D Pulse to select the iris position.
Auto_Pow_Off_* D Pulse to select the auto power off mode.
Cinema_* D Pulse to select the cinema mode.

Partner: Marantz
Model: VP-12S4
Device Type: DLP Projector
Menu_* D Pulse to turn the on-screen menu on and off.
Information_* D Pulse to turn the on-screen information window on and off.
Cursor_Up/Down/Right/Left/Enter D Pulse to move through the on-screen menus.
Initialize D Pulse once at start up to get in sync with the projector. After that the projector will
automatically update the Crestron system.
Lamp_Hours_Poll_Enable D Hold high to enable polling for lamp life remaining and elapsed time.
FEEDBACK:
To_Device$ S Serial signal to be routed to a 2-way serial com port.
Power_*_Fb D High to indicate current power status. It will flash when the projector is warming up
or cooling down.
Power_status_*_Fb D High to indicate the current power status.
Input_*_Fb D High to indicate the currently selected input.
Mode_*_Fb D High to indicate the currently selected picture mode.
Aspect_*_Fb D High to indicate the currently selected aspect ratio.
Video_Mute_*_Fb D High to indicate the current video mute status.
Blanking_*_Fb D High to indicate the currently selected blanking status.
RGB_sync_*_Fb D High to indicate the RGB sync state.
Patt_*_Fb D High to indicate the current state of the focus pattern.
Black_*_fb D High to indicate the currently selected black level.
Lamp_*_Fb D High to indicate the current lamp mode.
Auto_Pow_Off_*_Fb D High to indicate the current auto power off status.
Cinema_*_Fb D High to indicate the current cinema mode state.
Menu_*_Fb D High to indicate the current on-screen menu state.

Partner: Marantz
Model: VP-12S4
Device Type: DLP Projector
Information_*_Fb D High to indicate the current state of the on-screen information window.
Lamp_Life_Remaining A Analog value indicating the lamp life remaining.
Elapsed_Time A Analog value indicating the elapsed time.
TESTING:
OPS USED FOR TESTING: PRO2: 3.137
CNMSX: 5.14.02x
COMPILER USED FOR TESTING: 2.06.20
SAMPLE PROGRAM: Marantz VP-12S4 Demo
REVISION HISTORY: V. 1.0