Mark-10 E Series User manual

Series E
Advanced Ergonomics Kits
Quick Start Guide
32-1254
052022
USB driver
www.mark-10.com/downloads/software-downloads/Mark-10-USB-Driver.zip
For Mark-10 instruments and the model RSU100 RS-232 to USB converter. Re-
quired for communication with a PC. Follow the installation instructions provided
in the user’s guide.
PC requirements
Compatible with PCs running Microsoft Windows 7 or later. Minimum monitor res-
olution is 1108 x 758. A USB or RS-232C serial port is required. If USB communi-
cation is required, install the Mark-10 USB driver.
Mark-10 Corporation
11 Dixon Avenue
Copiague, NY 11726
888-MARK-TEN
Tel: [phone]
[email protected]
www.mark-10.com
LITERATURE & SOFTWARE DOWNLOADS
Download user’s guides, data sheets, software, solid
models, and more.
www.mark-10.com/resources
User’s Guide
www.mark-10.com/downloads/product-downloads/manual-
SeriesE.pdf
Series E Advanced Ergonomics Kits

Thank you!
Thank you for purchasing a Mark-10 Series
E Ergonomics Kit. Please read through this
Quick Start Guide and the complete force
gauge User’s Guide before using this kit.
Series E Advanced Ergonomics Kits
IMPORTANT SAFETY CONSIDERATIONS
Force gauges are sensitive instruments that must be treated with care. Please
review the yellow safety information card included in the box, as well as the safe-
ty information provided in the User’s Guide prior to operating the gauge.
LIST OF INCLUDED ITEMS:
Series E Advanced Ergonomics Kits
Qty. Part No. Description EKE (Advanced Kit) EKE (Professional Kit)
-100-1 -200-1 -500-1 -100-2 -200-2 -500-2
1 ME-100 Ergonomics force gauge, 100 lbF - - - -
1 ME-200 Ergonomics force gauge, 200 lbF - - - -
1 ME-500 Ergonomics force gauge, 500 lbF - - - - 
1 08-1022 AC adapter body with US, EU,
UK, or AUS prong 
1 08-1026 Battery (inside the gauge) 
1 09-1165 USB cable 
4 10-1023 Thumb screw, #6-32 
1 E1002 Padded attachment, square - 
1 E1003 Padded attachment, rectangular 
1 E1004 Padded attachment, curved 
1 E1005 Padded attachment, circular - 
1 E1006 Snap Hook 
1 E1007 Chain / hook assembly - 
1 E1008 Single handle grip - 
1 E1009 Double handle grip 
1 E1010 Pistol grip - 
1 E1000 Carrying case, small -
1 E1001 Carrying case, large - 
2 3
INSTALLING ACCESSORIES
Double and Single Handles
POWER
Press the button to power on the gauge. Press and hold to power o󰀨. The
gauge is powered either by the internal rechargeable battery or an AC adapter/
charger. The battery will last approximately 7 hours with the backlight turned on,
and 24 hours with the backlight turned o󰀨 before recharging is necessary.
Attachments
Ergonomics attachments (E1002 - E1010) are mounted to the gauge’s receptacle
via the Click-Lock®mechanism. Line up the attachment with the receptacle and
press until a click occurs. The attachment may be inserted in 90° or 180° orienta-
tions as shown below. To release the the attachment, pull back on the lever in the
rear of the housing, as shown below:
INSTALLING MESUR®SOFTWARE
MESUR®Lite
www.mark-10.com/mesur-lite-download-form/
Free basic data acquisition application, for data tabulation and exporting to Excel.
MESUR®gauge
www.mark-10.com/mesur-gauge-download-form/
Data tabulation, graphing, analysis, and reporting, with user-congurable start
and stop triggers and other tools. Compatible with all Mark-10 instruments. Free
90-day evaluation.
Attach the force gauge to the double
handle grip (AC1003) or single handle grip
(AC1003-1) by mating the male dowel pin in
the cradle to the corresponding hole in the
rear of the force gauge housing.
Then, fasten the gauge to the cradle with
four included thumb screws (10-1023), as
shown at left.