Mark-10 TT03 Series User manual

Series TT03
DIGITAL TORQUE GAUGES
Quick Start Guide
OTHER MARK-10 PRODUCTS
A full line of force and torque measurement products and related items,
including force gauges, torque gauges, force and torque test stands, sensors,
grips, software, and more.
Force and torque measurement engineered better
Mark-10 Corporation
11 Dixon Avenue
Copiague, NY 11726
888-MARK-TEN
Tel: [phone]
Fax: [phone]
Internet: www.mark-10.com
E-mail: [email protected] 32-1123
121119

Thank you!
Thank you for purchasing a Mark-10 Series TT03 digital
torque gauge. We are condent that you will get many
years of service from this product.
The TT03 is designed for clockwise and counter-clock-
wise torque testing applications in virtually every industry.
Please read through this Quick Start Guide and the com-
plete User’s Guide before using the gauge.
Series TT03 Digital Torque Gauges
IMPORTANT SAFETY CONSIDERATIONS
Force and torque measuring instruments are sensitive and must be treated with
care. Please review the safety information provided in the User’s Guide prior to
operating the indicator.
LIST OF INCLUDED ITEMS:
POWER
To power on the gauge, press the button. Press and hold to power o󰀨.
The gauge may be powered either by the internal rechargeable battery or an AC
adapter/charger. The battery will last approximately 7 hours with the backlight
turned on, and 24 hours with the backlight turned o󰀨 before recharging is necessary
LITERATURE & SOFTWARE DOWNLOADS
Download at: www.mark-10.com/downloads
1. User’s guides (PDF)
Provided for all Mark-10 instruments. Locate the user’s guide for this product
and read it thoroughly before use.
2. USB driver
For Mark-10 instruments and the model RSU100 RS-232 to USB converter.
Required for communication with a PC. Follow the installation instructions
provided in the user’s guide.
3. MESUR®family of software – see below.
INSTALLING MESUR®SOFTWARE
Mark-10 o󰀨ers three data collection applications:
MESUR®Lite
Free basic data acquisition application, for data tabulation and exporting to Excel.
Compatible with gauges only, not test stands.
MESUR®gauge / MESUR®gauge Plus
Data tabulation, graphing, analysis, and reporting, with user-congurable start and
stop triggers and other tools. Compatible with gauges and test stands for load
vs. time or load vs. travel. MESUR®gauge Plus adds test stand motion control
coordination. Both applications can be evaluated for 90 days.
PC requirements
Compatible with PCs running Microsoft Windows 7 or later. Minimum monitor
resolution is 1108 x 758. A USB or RS-232C serial port is required. If USB
communication is required, install the Mark-10 USB driver.
Quick Start Guide
Qty. Part No. Description
112-1049 Carrying case
1- Chuck key
1AC1030 / AC1031 /
AC1032 / AC1035
AC adapter w/US, EU, UK, or AUS prong
108-1026 Rechargeable NiMH battery (inside gauge)
1-Certicate of calibration
109-1165 USB cable
2 3