Marson MT8210P User manual

MT8210P User’s Manual V1.1
MT8210P
2D Handheld Scanner
User’s Manual
Version 1.1 DATE: 2023/02/24

MT8210P User’s Manual V1.1
2
Table of Content
CHAPTER 1 GENERAL SETTINGS...................................................................................................................................... 6
BARCODE CONFIGURABILITY ......................................................................................................................................................... 6
FACTORY DEFAULT........................................................................................................................................................................ 6
CHECK VERSION ............................................................................................................................................................................ 6
GOOD READ INDICATOR ................................................................................................................................................................ 7
Beep Tone ............................................................................................................................................................................... 7
Vibrator..................................................................................................................................................................................... 7
Indicator LED........................................................................................................................................................................... 7
DATA FORMAT................................................................................................................................................................................ 8
UTF-8/Shift-JIS to Unicode Conversion .............................................................................................................................. 8
HT/CR/ESC Converts to TAB/ENTER/ESCAPE ............................................................................................................... 8
Function Code Conversion.................................................................................................................................................... 9
Control Code Output Method ................................................................................................................................................ 9
Numeric Key .......................................................................................................................................................................... 11
OPOS ..................................................................................................................................................................................... 11
Capital Lock Mode................................................................................................................................................................ 11
IMAGING SETTINGS ...................................................................................................................................................................... 12
Inverse Barcode.................................................................................................................................................................... 12
CHAPTER 2 INTERFACE..................................................................................................................................................... 13
USB HID...................................................................................................................................................................................... 13
Keyboard Layout................................................................................................................................................................... 13
Intercharacter Delay ............................................................................................................................................................. 15
Interblock Delay .................................................................................................................................................................... 15
USB VCP .................................................................................................................................................................................... 16
RS232 ......................................................................................................................................................................................... 16
Baud Rate .............................................................................................................................................................................. 16
Data Bits & Parity.................................................................................................................................................................. 17
Stop Bits................................................................................................................................................................................. 18
Handshaking.......................................................................................................................................................................... 18
ACK/NAK ............................................................................................................................................................................... 18
BCC (Binary Check Character) .......................................................................................................................................... 18
CHAPTER 3 READING MODE ............................................................................................................................................ 19
TRIGGER MODE ........................................................................................................................................................................... 19
TOGGLE MODE............................................................................................................................................................................. 19
CONTINUOUS MODE .................................................................................................................................................................... 19
BATCH MODE ............................................................................................................................................................................... 20
AUTO-SENSING MODE ................................................................................................................................................................. 20
Auto-sensing Mode – Magnetic Switch ............................................................................................................................. 20
Trigger / Toggle / Auto-sensing Mode – LED Auto-Off Timeout.................................................................................... 21

MT8210P User’s Manual V1.1
3
CHAPTER 4 DATA FORMAT............................................................................................................................................... 22
CODE ID....................................................................................................................................................................................... 22
SET ID.......................................................................................................................................................................................... 22
DATA LENGTH .............................................................................................................................................................................. 24
PREAMBLE.................................................................................................................................................................................... 24
POSTAMBLE.................................................................................................................................................................................. 25
Clear Preamble/Postamble ................................................................................................................................................. 25
TERMINATOR ................................................................................................................................................................................ 25
CHAPTER 5 SYMBOLOGIES.............................................................................................................................................. 26
GENERAL SETTINGS .................................................................................................................................................................... 26
UPC-A ......................................................................................................................................................................................... 27
Enable/Disable UPC-A......................................................................................................................................................... 27
Check Digit ............................................................................................................................................................................ 27
Lead Digit (System Number)............................................................................................................................................... 27
Supplement............................................................................................................................................................................ 27
UPC-A to EAN-13 ................................................................................................................................................................. 28
UPC-E ......................................................................................................................................................................................... 28
Enable/Disable UPC-E......................................................................................................................................................... 28
Check Digit ............................................................................................................................................................................ 28
Lead Digit (System Number)............................................................................................................................................... 28
Supplement............................................................................................................................................................................ 29
EAN-8.......................................................................................................................................................................................... 30
Enable/Disable EAN-8 ......................................................................................................................................................... 30
Check Digit ............................................................................................................................................................................ 30
Supplement............................................................................................................................................................................ 30
EAN-13........................................................................................................................................................................................ 31
Enable/Disable EAN-13 ....................................................................................................................................................... 31
Check Digit ............................................................................................................................................................................ 31
Supplement............................................................................................................................................................................ 31
ISBN ....................................................................................................................................................................................... 32
ISSN ....................................................................................................................................................................................... 32
CODE 128/GS1-128(UCC/EAN 128) ....................................................................................................................................... 33
Enable/Disable Code 128.................................................................................................................................................... 33
Code128/GS1-128 Min/Max Length .................................................................................................................................. 33
CODE 39 ...................................................................................................................................................................................... 34
Enable/Disable Code 39 ...................................................................................................................................................... 34
Verification ............................................................................................................................................................................. 34
Start/Stop ............................................................................................................................................................................... 34
Full ASCII Code39................................................................................................................................................................ 35
Code39 Min/Max Length ..................................................................................................................................................... 35
CODE 32 ...................................................................................................................................................................................... 36

MT8210P User’s Manual V1.1
4
Enable/Disable Code 32 ...................................................................................................................................................... 36
Leading/Tailing...................................................................................................................................................................... 36
CODE 93 ...................................................................................................................................................................................... 37
Enable/Disable Code 93 ...................................................................................................................................................... 37
Code 93 Min/Max Length .................................................................................................................................................... 37
CODE 11 ...................................................................................................................................................................................... 38
Enable/Disable Code 11 ...................................................................................................................................................... 38
Code 11 Min/Max Length .................................................................................................................................................... 38
CODABAR (NW-7)........................................................................................................................................................................ 39
Enable/Disable Codabar...................................................................................................................................................... 39
Verification ............................................................................................................................................................................. 39
Start/Stop ............................................................................................................................................................................... 39
Codabar Min/Max Length .................................................................................................................................................... 40
INTERLEAVED 2OF 5.................................................................................................................................................................... 41
Enable/Disable Interleaved 2 of 5 ...................................................................................................................................... 41
Verification ............................................................................................................................................................................. 41
Interleaved 2 of 5 Min/Max Length..................................................................................................................................... 42
MATRIX 2OF 5............................................................................................................................................................................. 43
Enable/Disable Matrix 2 of 5 ............................................................................................................................................... 43
Verification ............................................................................................................................................................................. 43
Matrix 2 of 5 Min/Max Length.............................................................................................................................................. 44
INDUSTRIAL 2OF 5....................................................................................................................................................................... 45
Enable/Disable Industrial 2 of 5.......................................................................................................................................... 45
Verification ............................................................................................................................................................................. 45
Industrial 2 of 5 Min/Max Length ........................................................................................................................................ 46
STANDARD 2OF 5(IATA)............................................................................................................................................................ 47
Enable/Disable Standard 2 of 5.......................................................................................................................................... 47
Verification ............................................................................................................................................................................. 47
Standard 2 of 5 Min/Max Length ........................................................................................................................................ 48
MSI PLESSEY............................................................................................................................................................................... 49
Enable/Disable MSI Plessey............................................................................................................................................... 49
MSI Plessey Min/Max Length ............................................................................................................................................. 49
QR CODE..................................................................................................................................................................................... 50
Enable/Disable QR Code .................................................................................................................................................... 50
MICRO QR CODE......................................................................................................................................................................... 50
Enable/Disable Micro QR Code.......................................................................................................................................... 50
DATA MATRIX............................................................................................................................................................................... 50
Enable/Disable Data Matrix................................................................................................................................................. 50
PDF417....................................................................................................................................................................................... 51
Enable/Disable PDF417 ...................................................................................................................................................... 51
MICROPDF417............................................................................................................................................................................ 51
Enable/Disable MicroPDF417............................................................................................................................................. 51

MT8210P User’s Manual V1.1
5
AZTEC........................................................................................................................................................................................... 51
Enable/Disable Aztec ........................................................................................................................................................... 51
CHAPTER 6 APPENDIX ....................................................................................................................................................... 52
APPENDIX -NUMBERS ................................................................................................................................................................. 52
APPENDIX -UPPER CASE ALPHABETS ........................................................................................................................................ 53
APPENDIX -LOWER CASE ALPHABETS........................................................................................................................................ 55
APPENDIX –CONTROL CODES .................................................................................................................................................... 57
APPENDIX –SYMBOLS ................................................................................................................................................................. 59
APPENDIX –FUNCTION KEYS ...................................................................................................................................................... 62
APPENDIX –NAVIGATION KEYS ................................................................................................................................................... 63
APPENDIX –MODIFIER KEYS....................................................................................................................................................... 64
APPENDIX -ABORT ...................................................................................................................................................................... 65
APPENDIX -DEFAULT TABLE ....................................................................................................................................................... 66
APPENDIX -FACTORY ID ............................................................................................................................................................. 70
APPENDIX -ASCII TABLE ............................................................................................................................................................ 71
VERSION HISTORY.............................................................................................................................................................. 75

MT8210P User’s Manual V1.1
6
Chapter 1 General Settings
Barcode Configurability
Scanning below configuration barcodes will allow/prohibit user to change settings by scanning
configuration barcodes in this manual.
Enable Barcode Configurability*
Disable Barcode Configurability
Factory Default
Scanning below configuration barcode will reset all parameters to factory default settings (the ones
with *asterisk mark)
Factory Default
Check Version
To check firmware version, please scan below configuration barcode.
Check Version

MT8210P User’s Manual V1.1
7
Good Read Indicator
Beep Tone
Off
Beep Low (2.0KHz)
Beep Medium (2.7KHz)*
Beep High (4.0KHz)
Vibrator
Off*
On
Indicator LED
Off
On

MT8210P User’s Manual V1.1
8
Data Format
UTF-8/Shift-JIS to Unicode Conversion
Disable*
UTF-8 to Unicode
(Word)
Shift-JIS
(Notepad)
Shift-JIS to Unicode
(Word)
HT/CR/ESC Converts to TAB/ENTER/ESCAPE
Off*
On
Note:
1. By default, HT [$I], CR [$M] and ESC [%A] is transmitted as <0x09>, <0x0D> and <0x1B>
respectively.
2. When enabled, HT [$I], CR [$M] and ESC [%A] is transmitted as <TAB>, <ENTER> and
<ESCAPE> on keyboard respectively.

MT8210P User’s Manual V1.1
9
Function Code Conversion
Off
On*
Note:
Once disabled, the scanner will output the original encoded data of the barcodes in Appendix -
Function/Navigation/Modifier Keys.
Control Code Output Method
Ctrl Mode* Alt Mode
Disable Output
Note:
Control code (0x01 ~ 0x1A) can be sent by two methods:
(1) Ctrl Mode:
A barcode of “A<HT>F” (0x41/0x09/0x46) is scanned, the output sequence is:
a. Enter “A” – Press A key
b. Enter “Ctrl + I” – Since 0x09 corresponds to “CtrI + I”, virtual keyboard will press and hold
Ctrl key, press I key, and release Ctrl key and I key
c. Enter “F” – Press F key

MT8210P User’s Manual V1.1
10
Since “Ctrl+I” is shortcut for italicizing text in some software applications, the result of above
output sequence can be a regular A plus an italic F.
(2) Alt Mode:
For <HT>, the output sequence of virtual keyboard is:
Enter “Alt + 0 + 0 + 0 + 9” – Virtual keyboard will press and hold Alt key, press “0”, “0”, “0” and
“9” on numeric keypad respectively, and release Alt key.
Control Code Table
ASCII
Hex
Dec
Ctrl Mode
Alt Mode
NUL
00
0
Alt+0+0
Alt+0+0+0+0
SOH
01
1
Ctrl+a
Alt+0+0+0+1
STX
02
2
Ctrl+b
Alt+0+0+0+2
ETX
03
3
Ctrl+c
Alt+0+0+0+3
EOT
04
4
Ctrl+d
Alt+0+0+0+4
ENQ
05
5
Ctrl+e
Alt+0+0+0+5
ACK
06
6
Ctrl+f
Alt+0+0+0+6
BEL
07
7
Ctrl+g
Alt+0+0+0+7
BS
08
8
Ctrl+h
Alt+0+0+0+8
HT
09
9
Ctrl+i
Alt+0+0+0+9
LF
0A
10
Ctrl+j
Alt+0+0+1+0
VT
0B
11
Ctrl+k
Alt+0+0+1+1
FF
0C
12
Ctrl+l
Alt+0+0+1+2
CR
0D
13
Ctrl+m
Alt+0+0+1+3
SO
0E
14
Ctrl+n
Alt+0+0+1+4
SI
0F
15
Ctrl+o
Alt+0+0+1+5
DLE
10
16
Ctrl+p
Alt+0+0+1+6
DC1
11
17
Ctrl+q
Alt+0+0+1+7
DC2
12
18
Ctrl+r
Alt+0+0+1+8
DC3
13
19
Ctrl+s
Alt+0+0+1+9
DC4
14
20
Ctrl+t
Alt+0+0+2+0
NAK
15
21
Ctrl+u
Alt+0+0+2+1
SYN
16
22
Ctrl+v
Alt+0+0+2+2
ETB
17
23
Ctrl+w
Alt+0+0+2+3
CAN
18
24
Ctrl+x
Alt+0+0+2+4
EM
19
25
Ctrl+y
Alt+0+0+2+5
SUB
1A
26
Ctrl+z
Alt+0+0+2+6
ESC
1B
27
Alt+0+0+2+7
Alt+0+0+2+7

MT8210P User’s Manual V1.1
11
FS
1C
28
Alt+0+0+2+8
Alt+0+0+2+8
GS
1D
29
Alt+0+0+2+9
Alt+0+0+2+9
RS
1E
30
Alt+0+0+3+0
Alt+0+0+3+0
US
1F
31
Alt+0+0+3+1
Alt+0+0+3+1
Numeric Key
Numeric Key
Alphanumeric Key*
Note:
1. By default, the alphanumeric key is used for trasmitting digits. Scan NUMERIC KEY if you want
to use the keys on the numeric keypad.
2. If you select NUMERIC KEY, the Num Lock status of the physical keyboard should be ON.
OPOS
Off*
On
Capital Lock Mode
Capslock Off* Capslock On

MT8210P User’s Manual V1.1
12
Capslock Free
Note:
When barcode scanner is set to Capslock Free mode, no matter keyboard Capslock LED indicator
is ON or OFF, output will be always the same as the Original barcode. In other words, what you see
is what output is.
Imaging Settings
Inverse Barcode
Disable Inverse Barcode* Enable Inverse Barcode

MT8210P User’s Manual V1.1
13
Chapter 2 Interface
USB HID
USB HID
Keyboard Layout
English (US)* English (UK)
Danish Spanish
Hungarian (QWERTZ) Hungarian (QWERTY)
Canadian French Dutch

MT8210P User’s Manual V1.1
14
Italian French
German Swiss German
Swiss French Swedish
Czech (QWERTZ) Czech (QWERTY)
Norwegian Belgian
Portuguese Slovak
Brazilian (QWERTY) Canadian (Traditional)

MT8210P User’s Manual V1.1
15
Japanese
Alt Code
Intercharacter Delay
The configurable range is from 0 to 255ms. The larger the number, the longer the delay.
Set Intercharacter Delay
(Default = 0ms)
Example: Set Intercharacter Delay to 8ms
Step1: Scan Set Intercharacter Delay
Step2: Scan “0” “0” “8” in Appendix - Numbers
Step3: Scan Set Intercharacter Delay
Interblock Delay
The configurable range is from 0 to 2550ms. The larger the number, the longer the delay.
Set Interblock Delay
(Default = 0ms)
Example: Set Interblock Delay to 20ms
Step1: Scan Set Interblock Delay
Step2: Scan “0” “0” “2” in Appendix - Numbers
Step3: Scan Set Interblock Delay

MT8210P User’s Manual V1.1
16
USB VCP
USB VCP
RS232
RS232
Baud Rate
1200 2400
4800 9600*
19200 38400

MT8210P User’s Manual V1.1
17
57600 115200
Data Bits & Parity
8 Bits Even 8 Bits Odd
8 Bits Space 8 Bits Mark
8 Bits None* 7 Bits Even
7 Bits Odd
7 Bits Space
7 Bits Mark

MT8210P User’s Manual V1.1
18
Stop Bits
1 Stop Bit*
2 Stop Bits
Handshaking
None*
RTS enable at Power On
RTS enable with Communication
ACK/NAK
On
Off*
BCC (Binary Check Character)
On
Off*

MT8210P User’s Manual V1.1
19
Chapter 3 Reading Mode
Trigger Mode
In Trigger Mode the LED will stay on once trigger is pressed and held, and will turn off automatically
once a barcode is read or LED Auto-Off timeout expires.
Trigger Mode
Toggle Mode
In Toggle Mode the LED will stay on once trigger is pressed, and will turn off automatically once a
barcode is read or LED Auto-Off Timeout expires.
Toggle Mode
Continuous Mode
In Continuous Mode the LED will stay on once trigger is pressed, and will not turn off until the
trigger is pressed again.
Continuous Mode

MT8210P User’s Manual V1.1
20
Batch Mode
In Batch Mode the LED will stay on when trigger is pressed and held, during which the scanner will
read each unique barcode once. It cannot be read again until the next cycle.
Batch Mode
Auto-sensing Mode
In Auto-sensing Mode the LED will turn off automatically after LED Auto-Off timeout expires. Any
change detected in image will make LED turn on again.
Auto-sensing Mode*
Auto-sensing Mode – Magnetic Switch
When magnetic switch is on, the scanner automatically enters Auto-sensing Mode when placed on
Auto Stand (w/ magnet), and resumes Trigger Mode when held on hand. When magnetic switch is
off, the scanner will always stay in Auto-sensing Mode.
Off
On*