Martin Jerry SD01 User manual
Tech support Feb 2021
https://www.martinjerry.com/support
User Manual –WiFi Connection
Model: SD01, STD01
Feb 2021
By Martin Jerry
Content
READ HERE FIRST !!!......................................................................................................................1
Video1: WiFi Connection of Smart Dimmer.......................................................................................1
1. Download Smart Life App .......................................................................................................1
2. Set the Switch to Pairing Mode...............................................................................................1
3. Pair the switch on App ............................................................................................................2
AP mode ofr Wi-Fi Connection..........................................................................................................5
User Manual –WiFi Connection
Model: SD01, STD01
Tech support P a g e | 1 of 8 Feb 2021
https://www.martinjerry.com/support
READ HERE FIRST !!!
1. The switch must work well manually after installation. If not, go back to the wiring step as below.
Single Pole SD01 (click here) | 3-way STD01 (click here).
2. WiFi router should be 2.4G WiFi. CANNOT support 5G (802.11av).
a. If you are using the dual band wifi router, please set a separate SSID for the 2.4G.
b. If you are using google wifi, which you cannot set a name for 2.4G, please stay far enough from the
wifi router until your phone indicates 2.4G wifi connected.
Video1: WiFi Connection of Smart Dimmer:
https://www.youtube.com/watch?v=rxOY0Wu7KUU
1. Download Smart Life App
Confirm that you have downloaded the right Smart Life App (Same Logo as the right side). If not,
download it from the links
iPhone: https://itunes.apple.com/us/app/smart-life-smart-living/id1115101477?mt=8
Android: https://play.google.com/store/apps/details?id=com.tuya.smartlife&hl=en_US
2. Set the Switch to Pairing Mode
2.1. After wiring, you will see a red/purple indicator on the switch. If not, press the tiny restart button.
2.2. Press and hold the power button for 5-8s until the red/purple indicator is blue and blinks quickly.
5. WiFi Indicator
4. Restart Button
1. Dimmer Indicators
3. Power Button
2. Dimmer Button
User Manual –WiFi Connection
Model: SD01, STD01
Tech support P a g e | 6 of 8 Feb 2021
https://www.martinjerry.com/support
Step 1: Set the switch to AP mode
1. Press and hold the power button for 5-8s until the indicator blinks quickly.
2. Press and hold the power button for 5-8s until the indicator blinks slowly.
Step 2: Pair the switch on SmartLife App (AP mode)
2. Dimmer Switch
1.”+”
User Manual –WiFi Connection
Model: SD01, STD01
Tech support P a g e | 8 of 8 Feb 2021
https://www.martinjerry.com/support
Then, Connect the Hotspot from the Switch -- > Back to App for pairing.
- End -
7. Connect to switch hotspot
(Like smartlife xxxx )
6
8. Go back to App, it will
connect automatically
9. Set a name and tap Done
This manual suits for next models
1
Table of contents
