Acclaim Lighting X-Dimmer-3 PRO User manual

RS
ON
109 8
7
6
5
4
3
2 1
GND
Data -
Data+
GND
Data -
Data+
+6-24V
GND
DC IN
OUTPUT
Made in PRC
6A max.
Green
+6-24V
Red
Blue
DMX Address Setting
1 2 345678 9
Red Green Blue
Manual
1
2
4
8
16
32
64
128
256
Addr
DMX IN DMX OUT
X-Dimme r-3 PRO
Descriptions
P/N:24-004-2999-00
Rev 1.3
Congratulations with your purchase of this product.
Check for transport damage.
You should be in possession of the following items:
1 X-Dimmer-3 PRO
1 Manual, 1 Screwdriver & 1 connecting part
Should you discover transport damage after unpacking the equipment,
inform the hauler immediately. Never connect a damaged device. You
may also contact your supplier.
Delivery Packet
Technical Specifications
Operation temperature
Output
Housing
Control Protocol
Dimensions
Weights
0 degC to +40 degC
6A, Max.
Black plastic
DMX-512 (1990)
90(L) x 40(W) x 20(H)mm
50g
Power Requirement 6~24VDC, 6A Max.
Operation Guide
1.DMX Control Mode(DMX Addressing)-Slave Mode
DMX is short for Digital Multiplex. This is a universal binary language used as a form of communication between
intelligent fixtures. Each Dip Switch represents a binary value.
In this mode, the dip-switch 10 is flipped to the "ON" position, DMX address
can be set and the intensity of LED is controlled. Red effect is controlled by
Ch1, Green effect is controlled by Ch2 and Blue effect is controlled by Ch3.
Dip Switch 1 address equals 1
Dip Switch 2 address equals 2
Dip Switch 3 address equals 4
Dip Switch 4 address equals 8
Dip Switch 5 address equals 16
Dip Switch 6 address equals 32
Dip Switch 7 address equals 64
Dip Switch 8 address equals 128
Dip Switch 9 address equals 256
1,2,4
3,4
1,3,4
2,3,4
1,2,3,4
1
2
1,2
3
1,3
2,3
1,2,3
4
1,4
2,4
SWITCHES ON SWITCHES ON
START
CH#
START
CH#
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
.. ..
.. ..
.. ..
1 2 3 4 5 6 7 8 9 10
ON
OFF
1 =
0=
1 2 3 4 5 6 7 8 9 10
ON
OFF
1 =
0=
511 1,2,3,4,5,6,7,8,9
.. ..
A DMX value(address) is set by combining the different dipswitches that will add up to the value you wish to achieve,
for example: Setting DMX address for 21.
Flip switches1,3,&5 to the
"ON" position
Setting DMX address for 201.
Flip switches1,4,7,& 8 to the
"ON" position
Dipswitches# Value
1=1
3=4
5=16
=21
Dipswitches# Value
1=1
4=8
7=64
8=128
=201
User Instructions
Connection Terminal
X-Dimmer-3 PRO
-1-
IP 20
Ingress Protection Rating
Read this manual carefully before using our X-Dimmer-3 PRO. The X-Dimmer-3 PRO, three channel (R.G.B.) LED
dimmer, is designed to set the intensity for R.G.B. LEDs, three channels can be controlled separately. Available in
online operation, DMX control mode for slave control, Manual Dim mode for master control.
X-Dimmer-3 PRO
All manuals and user guides at all-guides.com
all-guides.com

2.Manual Control Mode-Master Mode
In this mode, the dip-switch 10 is flipped to the "OFF" position,
Flip the dip-switch 1~3 to set the intensity of Red LEDs, dip-switch
4~6 to set the intensity of Green LEDs and dip-switch 7~9 to set
the intensity of Blue LEDs. Please refer to the following table for
further information.
1 2 3 4 5 6 7 8 9 10
ON
OFF
1 =
0=
Red Green Blue
Red
(SW1~3)
Green
(SW4~6)
Blue
(SW7~9)
Intensity
0000
10014%
01028%
11043%
00157%
10171%
01186%
111100%
000
100
010
110
001
101
011
111
000
100
010
110
001
101
011
111
DipSwitch Setting
-2-
*Please Note: Improvements and specifications in the design of the unit and the manual are subject to
change without any prior written notice.
In online operation, only one master X-Dimmer-3 PRO is allowed in a link. The master controls the slave
X-Dimmer-3 PRO and maximum 32pcs can be controlled.
Note:
All manuals and user guides at all-guides.com

System Connection Diagram
(1) For controlling X-EYE 5mm LED version)
-3-
To next X-Dimmer-3 PRO
X- Dimme r-3 P ROX- Dimme r-3 P ROX- Dimme r-3 P RO
All manuals and user guides at all-guides.com

(2) For controlling X-CHIP PCB module version)
-4-
X- Dim me r-3 PROX- Dim me r-3 PRO
X- Dim me r-3 PRO
All manuals and user guides at all-guides.com