Martin Yale P6200 User manual

Provided By
http://www.MyBinding.com
http://www.MyBindingBlog.com
Martin Yale P6200
Paper Folder
Cleaning Rollers

P6200--Cleaning Rollers
From time to time it will be necessary to clean the rollers on
the P6200. The following instructions will assist in completing
this simple, periodic maintenance.
1. Remove the four Phillips screws from the bottom of the unit,
one on each corner. See photo 1
2. Separate the upper cover from the base by lifting up. There will
be some resistance where the power cord jack lines up. Apply
pressure to the cover as you lift up to remove.
3. Clean the rubber roller on the unit with Martin Yale Rubber
Roller Cleaner, a scotch-Britepad, and shop cloth (used for
cleaning any remaining liquid residue once rollers are scoured.)
See Photo 2
4. Once roller is cleaned, reinstall cover onto machine. Take
care to line up power cord jack correctly. Run 4-5 sheets
through the machine for test and to remove any remaining
residue.
Photo 1 Photo 2