Maserati MC-ES80 User manual

1

2
Page 3 ENG
Page 27 DK - NO
Page 51 SW
Page 75 FI

3
MC-ES80 E-SCOOTER
WARNING FOR ELECTRIC KICKSCOOTER
This appliance is not a toy.
Children shall not play with the appliance.
Adult supervision is required for minors.
This appliance can be used by children aged from 10 years old and above, and by persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or instructions concerning use of the appliance in
a safe way and understand the hazards involved.
Keep the battery out of the reach of small children.
Cleaning and user maintenance shall not be made by children without supervision.
WARNING FOR BATTERY CHARGER
Children shall not play with the appliance.
Adult supervision is required for minors.
This appliance can be used by children aged from 10 years old and above, and by persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or instructions concerning use of the appliance in
a safe way and understand the hazards involved.
Do not recharge non-rechargeable batteries.
The battery must be moved from the appliance before it is scrapped.
The appliance must be disconnected from the supply mains when removing the battery.
The battery is to be disposed of safely.
ENG

4
Introduction
For your better use experience, please read this product manual carefully.
Keep this user manual for future references.
In order to avoid damage, carefully read and follow the instructions of this user manual.
The user is responsible of all consequences from the incorrect use of the electric kickscooter.
The Retailer and the Distributor are not responsible of damages to objects and/or people caused by the incorrect use of the device.
This kickscooter is for personal entertainment only. It is prohibited to use it as public transportation.
This kickscooter can be used by one user at one time only.
Please use the product if in good condition only.
Please check whether the tires are damaged. If anything abnormal, please provide for maintenance.
If you lose control during driving, you may cause damage to you or to other people.
For private use only. Forbid to use the electric kickscooter on vehicle roads. Check local laws.
Before riding the kickscooter, the battery must be fully charged or almost fully charged. Follow the instructions on this user manual to
avoid technical problems.
ATTENTION
The battery is the heart of the main energy resources of the device, pay attention to its habit when using the battery.
The battery cannot be discharged and should be fully powered before each use.
Avoid deep current discharge, recharge the battery in time when the level is very low.
Fully charge the battery every 3 months, even when the kickscooter is not used.
WARNING
When battery is completely empty (0% charge), a normal charge of 3-5 hours might not be sufficient.
It is necessary to proceed with a 24 hours charge.

5
The product

6
Folding/Unfolding steps
How to unfold the e-scooter.
When the e-scooter is taken out from the box, it looks like in
the photo: folded without the handlebar.
Press down the rear brake pad with one hand and pull up the stem pipe with the
other hand.

7
The stem pipe must pull-up till it becomes up-straight, and the unfolding
procedure is completed.
How to install the handlebar.
First, well connect the cables with the same colour.

8
When cables are connected, put the handlebar on the down tube.
The screw holes must be aligned in right position.
Lock the screws on both sides of the stem.
Now, the handle part is installed.

9
How to fold.
The e-scooter is standing on the floor.
Heavily press the folding buckle with your foot.

10
Fold the stem pipe to the bottom board, until the small hook on the stem
and the hole on the foot brake are completely locked.
The folding procedure is completed.
When folded, the e-scooter can be easily carried.

11
LED Display
The LED display is on top of the handlebar, in front of the user.
There is a button key on the display: it is power switch and function switch.
Long press it to turn on/off the e-scooter.
Short press it to switch key or to turn on/off the front LED light.
The front light can be powered only when the display is on.
The unit will not automatically turn off when not in use for a while.

12
This is how the display looks:
Speed Display
It will change along with the current speed (value in Km/h).
High temperature warning
In case this icon turns-on, stop riding. Please refer to your Retailer of to the after-sale-service when this icon turns on.
Speed Gear
There are two gears in total.
Gear 1 is for low speed (max speed is 10 Km/h); Gear 2 is for high speed (max speed is 20 Km/h).
Press the power button twice to shift the gears.

13
Kilometre display
The speed and the distance are displayed in kilometers.
Bluetooth icon
This function is not valid for this product.
Battery Display
The battery capacity of the scooter is displayed by five bars, from 100% (full battery) to 0% (empty battery). It will display five bars
when the battery is full and one bar for very low battery.
When the energy of the battery is very low, the “E” will turn on: please stop riding for your safety and charge the battery for further
use.
Do not charge the battery if the temperature is lower than 0°C.
Error Display
In case this icon turns-on, stop riding and check the problem.
The display might show different error codes (see below chart).
In these cases, do not use the electric kickscooter anymore and contact your Dealer or the after-sale-service.
Error code
Error state
4
Short circuit fault
Check for wire connection or short circuit.
10
Dashboard communication is failure
Check the display panel and motherboard connection wire.
11
Motor A phase current sampling
collection is abnormal
Check the motherboard or motor A phase (yellow line) part of the wire.
12
Motor B phase current sampling
collection is abnormal
Check the motherboard or motor B phase (green line) part of the wire.

14
13
Motor C phase current sampling
collection is abnormal
Check the motherboard or motor C phase (blue line) part of the wire.
14
Throttle Hall anomaly
Check if the throttle is reset, the throttle connection and the throttle are normal.
15
Brake Hall anomaly
Check if the brake is reset, the brake connection and the brake are normal.
16
Motor Hall anomaly
Check if the motor Hall wiring (yellow) is normal.
17
Motor Hall anomaly
Check if the motor Hall wiring (blue) is normal.
18
Motor Hall anomaly
Check if the motor Hall wiring (green) is normal.
21
BMS communication error
BMS communication (please ignored it with non-communication battery).
22
BMS password error
BMS password is wrong (please ignored it with non-communication battery).
23
BMS number is abnormal
BMS number is abnormal (please ignored it with non-communication battery).
28
MOS tube upper bridge failure
The MOS tube is faulty. The motherboard needs to be replaced.
29
MOS tube lower bridge failure
The MOS tube is faulty. The motherboard needs to be replaced.
33
The battery temperature is
abnormal
The battery temperature is too high, check the battery temperature, keep it off for a
while and then turn it on again.
50
Female wire in high voltage
Main wire voltage is too high.
53
System over loading
Exceeding system load.
54
MOS phase wire short circuit
Check if the phase line connection is shorted.
55
Temperature of controller is high
The temperature of the motherboard is too high, restart it after the vehicle is cooled
for a while.

15
Instructions for use
Before riding the kickscooter for the first time, the battery must be fully charged. Follow the instructions on this user manual to avoid
technical problems. Try to recharge after each ride, which can greatly extend the service life of the battery.
Put the kickscooter on a flat surface.
The kickscooter is developed for flat grounds. Take care of uneven and bumpy grounds.
Long press the power button, to turn-on the unit.
After turning on the electric kickscooter, verify the level of the battery power on the display and put one foot on the pedal.
Stand on the pedal with one leg only.
Gently press the lever on the right handle: the device will accelerate.
Step on with the other foot whilst the kickscooter is moving.
Release the acceleration lever to slow-down.
Release the acceleration lever and gently press the lever on the left handle: the e-scooter will brake.
When desired, as an alternative, you can use the rear wheel brake system: put the feet on the bumper of the rear wheel to brake.
Stop the kickscooter and remove the feet, one by one.

16
Distance
The maximum range of the scooter is 30 km approx.
This maximum range is affected by the road type (flat and smooth ground will increase the distance, otherwise the distance will be
reduced), ambient temperature, maintenance (tyres, battery).
Loading
Driver’s maximum weight should be of 120 Kg and minimum weight should be 30 Kg.
These limits ensure the driver’s safety and reduce damages to the scooter.
Battery
The battery charge (and therefore the maximum distance) is affected by some factors like:
1. Ground (when ground is not flat, the discharge is increased).
2. Weight of the user.
3. Ambient temperature.
4. Drive style and speed will affect the life of the battery charge: a constant and moderate speed, positively affect the charge of the
battery; a high and inconsistent speed, will reduce the life of the battery charge.
5. Maintenance (battery must be kept in good condition by the user and must be charged in the correct way).
IMPORTANT
Charge the battery once every 90 days at least. Even if the kickscooter is not used for long time.
The kickscooter comes with its own battery-charger.
Do not use different charger to charge the battery.

17
Battery Charging
•Before using the kickscooter for the first time, fully charge the battery.
•Always check the battery level positioned on the display. There are five LED lights. In case there is only one LED light, we suggest
stop using the scooter and charge battery.
•When you find the power-indicator shows very low energy, please stop riding for your safety.
•Try to recharge after each ride, which can greatly extend the service life of the battery.
•The kickscooter must be powered-off before proceeding with charging.
•Do not use the kickscooter when charging the battery.
•Charging should be in a safe, dry and clean environment.
•Do not charge the battery if the temperature is lower than 0°C.
•Keep the product and the battery at the recommended temperature to keep the highest efficiency of the kickscooter and of the
battery.
•If used in an extreme cold or hot environment, the charging time sill be lengthened too.
•Working temperature: 0°C  40°C.
•Please check the temperature of the battery during the charging process. Charging temperature must be: 0°C  40°C. Humidity
level during charge must be: 5%  95%.
•If the temperature is higher than 40°C, the scooter functioning might be damaged and battery life might be reduced.
WARNING/ATTENTION
The battery contains dangerous substances.
Do not attempt to open the battery and do not insert objects inside it.
Do not charge overnight or when you are not able to observe the kickscooter.
Charge and store in an open dry area, away from combustibles (meaning items that can catch fire).
Do not charge directly after riding. Let the device cool for an hour before charging.
If giving to someone for the holidays, leave it in its partially charged state. Don’t take it out of the package to bring it to a full charge

18
and then wrap it back up. Often, the product comes partially charged. Leave it in that state until it is ready to be used.
Do not ride near vehicular traffic.
It is important to wear safety gear when using this device - a skateboard helmet, knee and elbow pads for protection from falls.
Correctly dispose and recycle the batteries according to local recycling and environmental regulation.
Never treat the batteries as common domestic waste, to prevent explosion and pollution.
Never throw the batteries into fire.
The battery must be removed from the kickscooter before it is scrapped.
The kickscooter must be disconnected from the supply mains when removing the battery.
Only the original charger must be used. Please refer to your retailer in case replacement is required.
CAUTIONS
Do not use the kickscooter if the battery is low.
Do not use the kickscooter in case of burning smell.
Do not use the kickscooter if anything leaks out from the battery.
Do not touch anything leaking out from the battery.
Do not let children or animals touch the battery.
Unplug the charger before riding the kickscooter.
Only use the supplied battery and the supplied charger.
Only professionals can disassemble and maintain the battery. Please refer to your Retailer.
1. Charging should be in a safe, dry and clean environment.
2. Ensure the charging port is dry.
Open the protective cover on the kickscooter.
Insert the battery-charger into the kickscooter charging port. The other end of the charger must be connected to the mains to
activate the charger.
It is important to connect first the cable to the battery and then to the mains.

19
3. The indicator light on the charger will be red: this grants that the charge is proceeding.
When the indicator light is turned to green, the battery is fully charged. Remove the cable of the battery charger.
4. Put the cover back to position.
Please stop charging or the battery life will be reduced. Charging time is around 3-5 hours. Too long charging time will affect the
battery life.
WARNING
When battery is completely empty (0% charge), a normal charge of 3-5 hours might not be sufficient.
It is necessary to proceed with a 24 hours charge.
Transport of the battery
Lithium batteries are considered dangerous goods. Please check the local law about transportation.
Speed Limit
The maximum speed is 20 Km/h.
When the driver reaches the maximum speed, the kickscooter will keep the speed even if the driver accelerates.
Safety drive
1. Please carefully read this user manual before first use.
2. Please always wear helmet, knee protections, elbow pads, when riding.
3. Wear comfortable flat shoes.
4. Please always verify that the use of the electric kickscooter is allowed.
5. Always check the level of the battery. If too low, the kickscooter might suddenly stop and cause the fall of the driver.

20
6. This product is not suitable for children under the age of 10.
7. Adult supervision is required for minors of 18.
8. The kickscooter is for personal entertainment only. It is prohibited to use it as public transportation.
9. It is forbidden to use the kickscooter on vehicle roads (check your local laws).
10. It is forbidden to carry goods whilst driving the kickscooter.
11. Pay attention to objects and people around.
12. Do not start or stop driving suddenly. Sudden movements will make the kickscooter out of control.
13. Do not use it on streets, in traffic and by night (check your local laws).
14. Do not drive in dark places.
15. Pay attention to the ground. The kickscooter is made for smooth and flat grounds.
16. Do not ride up or down from stairs or escalators.
17. Do not drive after drinking or taking drugs.
18. The kickscooter can be used by one person at one time only, even if the maximum weight is not reach.
19. Overweight is prohibited. Functions of the kickscooter might be damaged.
20. Underweight is prohibited. The kickscooter might not be under control anymore.
21. The speed of the kickscooter is affected by the road type, the ambient temperature, the maintenance of the battery.
22. Always keep safety distance between you and other vehicles, people, obstacles, to avoid any collision.
23. Always check the level of the battery. If too low, the kickscooter might suddenly stop and cause the fall of the driver.
24. Do not drive when raining. Avoid wet floors and puddles. Avoid puddles deeper than 2cm.
The control of the kickscooter will be reduced. The user might fall. The electrical system of the kickscooter might be damaged.
25. Avoid driving the kickscooter on grounds with snow or ice or mud. The scooter would not be under control.
26. Do not use the electric kickscooter in unsafe circumstances or dangerous places.
27. Keep away from fire.
28. Do not modify or replace the parts of the kickscooter by yourself. Any action must be followed by the Retailer or the authorized
Service Centre.