Master Bilt TAC-27HDSA User manual

ITEM NO. ______________________________________________________
PROJECT ______________________________________________________
LOCATION _____________________________________________________
DATE _________________________ QTY. ___________________________
908 Highway 15 North • New Albany, MS 38652
PHONE: [phone] or 662-534-9061 • FAX: [phone] or 662-534-6049 • www.master-bilt.com
• Three heavy-duty, welded wire, gray
epoxy-coated shelves per section,
adjustable in 1/2" increments
• 21/2" foamed-in-place “zero ODP”
urethane insulated walls
DOORS
• 2" stainless steel foamed-in-place doors
• Self-closing with cylinder locks and
90° hold-open feature
• Horizontal door handles
• Self-sealing replaceable magnetic
gaskets
• Lift-off doors
• Anti-condensate door frame heaters
• Light switch concealed in door hinge
• Door width:
TAC/TAF-27HDSA .............. 273/4"
TAC/TAF-48HD/74HDSA ... 233/8"
REFRIGERATION
• TAC model refrigerant: R-134a
• TAF model refrigerant: R-404A
• Top mounted, self-contained,
factory tested refrigeration system
• TAF models feature auto defrost with
double failsafe override
• Electric condensate evaporator
• Minimum 4" clearance required
between cabinet back and wall on
TAC models, minimum 6" clearance
required on TAF models
• TAC model temperature range:
34° to 41°F (1° to 5°C)
• TAF model temperature range:
0° to -20°F (-18° to -29°C)
• R-factor (insulation efciency
rating): 21.55 on walls, 17.24 on
doors
WARRANTY
• Standard limited four year extended
compressor and one year limited
parts and labor
FEATURES
TAF-48HDSA
TAC/TAF SERIES
Foodservice Solid Door
Reach-ins
OPTIONS
❑ Add sufx “R” for remote system
❑ Legs
❑ Pan rack
❑ Additional welded wire gray
epoxy shelving
REFRIGERATORS FREEZERS
❑ TAC-27HDSA ❑ TAF-27HDSA
❑ TAC-48HDSA ❑ TAF-48HDSA
❑ TAC-74HDSA ❑ TAF-74HDSA
STANDARD
ELECTRONIC CONTROL
ON TAF MODELS
• Allows user to easily monitor
defrost functions from the panel
interface on the front of the
merchandiser
• Audible and visual alarm
• Decreases service time and calls
• Eliminates room thermostat,
defrost termination/fan delay
control, defrost timer and digital
thermometer or other temperature
indicator
CONSTRUCTION
• All stainless steel nish interior and
exterior
• Top mounted low prole interior
evaporator housing
• Digital thermometer on TAC models
(built into electronic controller
interface on TAF models)
• Electric condensate evaporator
• Heavy-duty casters

NOTE: Cabinet designed for optimum performance in air-conditioned area at 75°F ambient and 55% relative humidity.
All specications subject to change without notice.
908 Highway 15 North • New Albany, MS 38652
PHONE: [phone] or 662-534-9061 • FAX: [phone] or 662-534-6049 • www.master-bilt.com
PLAN VIEW SIDE VIEW ELEVATION VIEW



TAC/TAF SERIES
FOODSERVICE SOLID DOOR REACH-INS
TECHNICAL SPECIFICATIONS
LISTINGS
HOOKUP
BID SPECIFICATIONS
Item no. TAC-_____HDSA and/or Item no.
TAF-_____HDSA.
Provide_______( ) Medium Temp
Foodservice Solid Door Reach-in(s), and/or
_______( ) Low Temp Foodservice Solid
Door Reach-In(s). Master-Bilt model no(s).
TAC-_____HDSA and/or TAF_____HDSA.
Cabinet to be constructed of stainless steel
interior and exterior. TAF models will be
equipped with an electronically controlled
1197-7/09-web
©Master-Bilt Products division of Standex International, Inc. All rights reserved. Printed in U.S.A.
TAC MODELS: Via plug in, 8 foot long, exible 3 wire 14/3 cord
with molded plug. 20 amp service is required for all models.
TAF-27HDSA: Via plug in, 8 foot long, exible 3 wire 14/3 cord with
molded plug. 15 amp service is recommended.
TAF-48HDSA: Hardwired
TAF-74HDSA: Hardwired with separate junction boxes for 115V and
208- 230V and with a maximum 20 amp fuse.
monitoring system as well as an automatic
defrost with double failsafe override.
All models to have digital thermometer
(built into electronic controller interface on
TAF models), electric condensate evaporator,
heavy-duty casters, three welded wire, gray
epoxy-coated shelves per section. Doors will
be self-closing with 90° hold-open feature,
locking horizontal handles and door frame
heater.
The refrigeration system will be top
mounted and self-contained using R-134a
refrigerant in TAC models and R-404A in TAF
models. The temperature range will be 34°
to 41°F (1° to 5°C) for TAC models and 0° to
-20°F (-18° to -29°C) for TAF models.
Cabinet to have standard limited 4 year
extended compressor warranty and 1 year
limited parts and labor warranty. Cabinet to
be UL, C-UL and NSF listed.
NEMA 5-20P
(TAC MODELS
& TAF-27HDSA)
MODEL
DIMENSIONS
(in.)
DIMENSIONS
(mm)
VOLTS** AMPS
UNIT
H.P.
NO. OF
DOORS
NO. OF
SHELVES
STANDARD
SHELF SIZE
(in inches)
CAP.
CU.
FT.
SHIP
CU.
FT.
SHIP
WT.
LB/KG L D H* L D H*
MEDIUM TEMP
TAC-27HDSA 31 353/4801/2787 908 2045 115 12.1 1/2 1 3 251/4 x 26 25.4 76.0
355/161
TAC-48HDSA 52 353/4801/21321 908 2045 115 13.1 1/2 2 6 221/2 x 26 45.9 119.0 465/211
TAC-74HDSA 78 353/4801/21981 908 2045 115 15.0 3/4 3 9 221/2 x 26 71.4 174.0 650/295
LOW TEMP
TAF-27HDSA 31 353/4801/2787 908 2045 115 10.5 3/4 1 3 251/4 x 26 25.4 76.0
385/175
TAF-48HDSA 52 353/4801/21321 908 2045 115/208-230 5.0/7.5 1 2 6 221/2 x 26 45.9 119.0 540/245
TAF-74HDSA 78 353/4801/21981 908 2045 115/208-230 6.2/11.2 11/23 9 221/2 x 26 71.4 174.0 670/305
*Height includes casters. **TAF-48HDSA and TAF-74HDSA operate on a minimum of 208 volts. A voltage boosting transformer (part no. 39-01087)
must be used when the supply voltage is less than 208 volts.