ATTACHING TARGETS
✖ Do not stick target to walls or furniture as it
may cause damage to the surface.
Peel backing off target before sticking it to surface.
REMOVING DARTS
& ROUNDS
5
CLEANING DARTS
& ROUNDS
7REPLACING TARGETS
& SHIELDS
8
6
Replace time-worn targets and shields with
Y8620/BBY17 SMART STICK REFILLS.
Each sold separately, subject to availability.
Y8620/BBY17
A. Activate shields. B. To close shields.
3
2
CAUTION: Do not aim at eyes or face.
TO AVOID INJURY: Use only darts
designed for this product.
Do not modify rounds, darts or dart blaster.
Please keep these instructions for future reference as they contain important information.
INSTRUCTIONS
CONTENTS
1
©2014 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Relations
1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty.,
Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 503-09, North Tower, World
Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5, 13th
Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Malaysia. Tel:03-78803817, Fax:03-78803867.
BCT03-0920
x 32
1
4
WARNING: Do not aim at eyes or face. Only use
projectiles supplied with this toy.
Do not fire at point blank range.
Always wear appropriate eye-wear,
sold separately.
ATTACHING MAGAZINE TO BLASTER
3
TO FIRE
4
INSTRUCTION SHEET
SPECIFICATIONS
Toy:
Toy No.:
Part No.:
Trim Size:
Folded Size:
Type of Fold:
# colors:
Colors:
Paper Stock:
Paper Weight:
EDM No.:
DATE:
REV. DATE:
BCT03
EXTREME BOOM
0920
03.05.14
A4
A5
70 gsm
One
black
FSC recycled paper
REV. DATE: 03.12.14
b
a
Detach shields as desired.
Click!
Dust, dirt, and other debris can cause darts and
rounds to lose their adhesiveness.
To clean them, rinse darts’ tips and rounds with
tap water or use tape to remove excess debris.
NOTE: Dry darts and rounds before using again.
IMPORTANT:
Always remove darts and rounds from target
after play. Keep one hand pressed on target,
gently peel round off or hold dart by the tip
and peel off.
SHIELDS
2
A. Open magazine cover.
D. Activate and detach shields.
C. Close magazine cover.
E. Attach magazine to blaster rail.
B. Load rounds.
Pull rounds apart, mix the colors
up & stick them back together.
A. Load all darts into spin barrel. B. Pull handle all the way back to fire.
C. Push handle all the way forward
to rotate to next dart.
NOTE: Unload all darts from spin
barrel when not in use.
D. Pull and push handle all the way
forward and all the way back
repeatedly for rapid fire.
