Mattel BOOMco STEALTH AMBUSH Series User manual

Please keep these instructions for future reference as they contain important information.
GAUNTLET
INSTRUCTIONS
WARNING: Do not aim at eyes or face. Only use
projectiles supplied with this toy.
Do not fire at point blank range.
Always wear appropriate eye-wear,
sold separately.
INSTRUCTION SHEET
SPECIFICATIONS
Toy:
Toy No.:
Part No.:
Trim Size:
Folded Size:
Type of Fold:
# colors:
Colors:
Paper Stock:
Paper Weight:
EDM No.:
DATE:
CBP42
STEALTH AMBUSH™
0920
A4
70 gsm
02.19.14
03.05.14
REV.DATE:
DATE:
One
black
FSC recycled paper
©2014 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Relations
1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty.,
Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 503-09, North Tower, World
Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5, 13th
Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Malaysia. Tel:[phone], Fax:[phone].
CBP42-0920
ATTACHING TARGETS
6REMOVING DARTS
7
CAUTION: Do not aim at eyes or face.
TO AVOID INJURY: Use only darts
designed for this product.
Do not modify darts or dart blaster.
CONTENTS
1
SHIELDS
2
STEALTH AMBUSH™
14
Y8620/BBY17
Replace time-worn targets and shields with
Y8620/BBY17 SMART STICK REFILLS.
Each sold separately, subject to availability.
✖
Do not stick target to walls or furniture as
it may cause damage to the surface.
Peel backing off target before sticking it to surface.
x17
A. Activate shields. B. To close shields.
CLEANING DARTS
8REPLACING TARGETS
& SHIELDS
9
IMPORTANT:
Always remove darts from target after play.
Keep one hand pressed on target, hold dart
by the tip and gently peel dart off.
Dust, dirt, and other debris can cause darts to lose
their adhesiveness.
To clean darts, rinse darts’tips with tap water or use
tape to remove excess debris.
NOTE: Dry darts before using again.
03.05.14
REV.DATE:
Detach shields as desired.
a
b
Click!

TO FIRE
3
SURPRISE ATTACK MODE
4
SURPRISE ATTACK MODE (CONTD.)
4
PERFORMANCE TIPS
5
A. Push tab up.
A. Push tab down.
B. Pull rear handle all the way back and
push all the way forward to raise
launcher and side storage.
B. Fully load clip with darts.
F.
To activate surprise attack launcher:
D. Pull rear handle all the way back and
push it all the way forward to fire each dart.
D. Close launcher and side storage.
E.
C. Load darts.
B.
Clip may stop or slow down when dirt and lint
gather in clip rails and blaster channels. For best
performance, periodically wipe surfaces clean
with paper towel (not included).
A. If the launcher detaches,
reattach as shown.
C. Insert the fully loaded clip from the left
side of the blaster with the arrowheads
pointing right.
Pull folding "T" handle all the way
back to charge launcher.
NOTE: Do not charge with launcher in “UP” position.
Pull rear handle all the way back and push
all the way forward to launch surprise
attack and reveal hidden dart storage!
E. Remove empty clip from
blaster for refill.
23
03.05.14
REV.DATE:
b
a
Also works with BBR56
Clip & Darts (not included).
IMPORTANT: When using clip with Y8618 Rapid Madness, align to blaster.
TOP VIEW
Click!
Click!
Click!
Align marking ( I) to
blaster as shown.