Mattel Hot Wheels Corkscrew Crash User manual

1
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE
REFERENCE AS THEY CONTAIN IMPORTANT INFORMATION.
5-10
service.mattel.com
REQUIRES 4 - D SIZE (LR20) ALKALINE BATTERIES (NOT INCLUDED).
DISPOSE OF BATTERIES SAFELY.
COLORS AND DECORATIONS MAY VARY.
84
8
234 5
76
FTB65-0970
PULL BACK THE LAUNCHER AND LOAD YOUR CAR.
76
3. 4.
2.
9. 10.
11.
13.
12.
7.
8.
CONTENTS
APPLY LABELS
4.
1.
2.
3.
INSTRUCTIONS
CORKSCREW CRASH ™
1101664505-DOM G2
AGES
1
2
©2017 Mattel FTB65-0962
1
2
x1
X3
X3
X2
Refer to letters on toy parts and
instructions to help with assembly.
1
1
BATTERY INSTALLATION
• Unscrew the battery cover with a Phillips head screwdriver (not included).
• Install 4 new "D" size (LR20) alkaline batteries (not included) in the orientation (+/-) shown.
• Replace battery cover and tighten screws.
• For longer life use alkaline batteries.
• Replace the batteries if boosters can no longer propel vehicles through track set.
• When exposed to an electrostatic source, the product may malfunction. To resume normal
operation, remove and re-install the batteries.
1.
ASSEMBLY
BOTTOM VIEW
POWER ON.
RACE AND CRASH OUT YOUR FRIENDS!
USE THE LAUNCHER OR LAUNCH RAMP TO ADD MORE CARS TO THE ACTION!
HOW MANY MORE CARS CAN YOU ADD WITHOUT GETTING WIPED OUT
IN THE CRASH ZONES?
NOT FOR USE WITH SOME HOT WHEELS®VEHICLES.
NOT FOR USE WITH SOME HOT WHEELS®VEHICLES.
INCLUDES 1 VEHICLE. ADDITIONAL VEHICLES SOLD SEPARATELY.
PRESS TO LAUNCH! SPEED THROUGH THE TRIPLE POWER BOOSTERS
AND LOOPS FOR SUPER STUNTING ACTION!
BACK VIEW
FRONT VIEW
BOTTOM VIEW
BOTTOM VIEW
PRESS FIRMLY.
SIDE VIEW
TO PLAY
a
b
UPPER PART SHOULD GO
INSIDE.
BUILDERS TIP!
UPPER PART SHOULD GO INSIDE.
TROUBLESHOOTING TIPS
REPLACING RUBBER BAND
STEP 8
Q. My vehicle keeps crashing on the track for no reason. What is the problem?
A. Clear all obstructions on the track. Adjust track side walls at each connection point and make
sure they are assembled as described in the assembly steps.
Q. My vehicle keeps slowing down by itself on the track. What
is the problem?
A. Lint may collect around your vehicle's axles. This may
cause the vehicle to run slowly. Use tweezers or a
toothpick to remove lint.
HOOK RUBBER BAND INTO SLOTS ON LAUNCHER.
©2018 Mattel. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Services 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park,
Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel South
Africa (PTY) LTD, Office 102 I3, 30 Melrose Boulevard, Johannesburg 2196. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour
City, Tsimshatsui, HK, China. Tel.: [phone]. Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3 Avenue 7, Bangsar South
City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: [phone].
5. 6.
CRASH ZONES PARKING ZONES
A
A
D
D
E
C
C
B
B
F
F
A
AA
E
E
B
B
C
C
DD
E
F
G
G
K
K
H
H
H
F
F
F
FF
G
G
H
L
L
L
L
H
KK
E
K
X3
X3
CLICK!
CLICK!
CLICK!
CLICK!
CLICK!
®
ADULT ASSEMBLY REQUIRED
K
K
I = ON
O = OFF
This is a battery-operated product.
1 flyer (00001-2908G16) is required
to be placed inside the packaging.
PRESS FIRMLY.
INSTALL BATTERIES FIRST.

1
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE
REFERENCE AS THEY CONTAIN IMPORTANT INFORMATION.
5-10
service.mattel.com
REQUIRES 4 - D SIZE (LR20) ALKALINE BATTERIES (NOT INCLUDED).
DISPOSE OF BATTERIES SAFELY.
COLORS AND DECORATIONS MAY VARY.
84
8
234 5
76
FTB65-0970
PULL BACK THE LAUNCHER AND LOAD YOUR CAR.
76
3. 4.
2.
9. 10.
11.
13.
12.
7.
8.
CONTENTS
APPLY LABELS
4.
1.
2.
3.
INSTRUCTIONS
CORKSCREW CRASH ™
1101664505-DOM G2
AGES
1
2
©2017 Mattel FTB65-0962
1
2
x1
X3
X3
X2
Refer to letters on toy parts and
instructions to help with assembly.
1
1
BATTERY INSTALLATION
• Unscrew the battery cover with a Phillips head screwdriver (not included).
• Install 4 new "D" size (LR20) alkaline batteries (not included) in the orientation (+/-) shown.
• Replace battery cover and tighten screws.
• For longer life use alkaline batteries.
• Replace the batteries if boosters can no longer propel vehicles through track set.
• When exposed to an electrostatic source, the product may malfunction. To resume normal
operation, remove and re-install the batteries.
1.
ASSEMBLY
BOTTOM VIEW
POWER ON.
RACE AND CRASH OUT YOUR FRIENDS!
USE THE LAUNCHER OR LAUNCH RAMP TO ADD MORE CARS TO THE ACTION!
HOW MANY MORE CARS CAN YOU ADD WITHOUT GETTING WIPED OUT
IN THE CRASH ZONES?
NOT FOR USE WITH SOME HOT WHEELS®VEHICLES.
NOT FOR USE WITH SOME HOT WHEELS®VEHICLES.
INCLUDES 1 VEHICLE. ADDITIONAL VEHICLES SOLD SEPARATELY.
PRESS TO LAUNCH! SPEED THROUGH THE TRIPLE POWER BOOSTERS
AND LOOPS FOR SUPER STUNTING ACTION!
BACK VIEW
FRONT VIEW
BOTTOM VIEW
BOTTOM VIEW
PRESS FIRMLY.
SIDE VIEW
TO PLAY
a
b
UPPER PART SHOULD GO
INSIDE.
BUILDERS TIP!
UPPER PART SHOULD GO INSIDE.
TROUBLESHOOTING TIPS
REPLACING RUBBER BAND
STEP 8
Q. My vehicle keeps crashing on the track for no reason. What is the problem?
A. Clear all obstructions on the track. Adjust track side walls at each connection point and make
sure they are assembled as described in the assembly steps.
Q. My vehicle keeps slowing down by itself on the track. What
is the problem?
A. Lint may collect around your vehicle's axles. This may
cause the vehicle to run slowly. Use tweezers or a
toothpick to remove lint.
HOOK RUBBER BAND INTO SLOTS ON LAUNCHER.
©2018 Mattel. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Services 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park,
Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel South
Africa (PTY) LTD, Office 102 I3, 30 Melrose Boulevard, Johannesburg 2196. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour
City, Tsimshatsui, HK, China. Tel.: [phone]. Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3 Avenue 7, Bangsar South
City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: [phone].
5. 6.
CRASH ZONES PARKING ZONES
A
A
D
D
E
C
C
B
B
F
F
A
AA
E
E
B
B
C
C
DD
E
F
G
G
K
K
H
H
H
F
F
F
FF
G
G
H
L
L
L
L
H
KK
E
K
X3
X3
CLICK!
CLICK!
CLICK!
CLICK!
CLICK!
®
ADULT ASSEMBLY REQUIRED
K
K
I = ON
O = OFF
This is a battery-operated product.
1 flyer (00001-2908G16) is required
to be placed inside the packaging.
PRESS FIRMLY.
INSTALL BATTERIES FIRST.

1
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE
REFERENCE AS THEY CONTAIN IMPORTANT INFORMATION.
5-10
service.mattel.com
REQUIRES 4 - D SIZE (LR20) ALKALINE BATTERIES (NOT INCLUDED).
DISPOSE OF BATTERIES SAFELY.
COLORS AND DECORATIONS MAY VARY.
84
8
234 5
76
FTB65-0970
PULL BACK THE LAUNCHER AND LOAD YOUR CAR.
76
3. 4.
2.
9. 10.
11.
13.
12.
7.
8.
CONTENTS
APPLY LABELS
4.
1.
2.
3.
INSTRUCTIONS
CORKSCREW CRASH ™
1101664505-DOM G2
AGES
1
2
©2017 Mattel FTB65-0962
1
2
x1
X3
X3
X2
Refer to letters on toy parts and
instructions to help with assembly.
1
1
BATTERY INSTALLATION
• Unscrew the battery cover with a Phillips head screwdriver (not included).
• Install 4 new "D" size (LR20) alkaline batteries (not included) in the orientation (+/-) shown.
• Replace battery cover and tighten screws.
• For longer life use alkaline batteries.
• Replace the batteries if boosters can no longer propel vehicles through track set.
• When exposed to an electrostatic source, the product may malfunction. To resume normal
operation, remove and re-install the batteries.
1.
ASSEMBLY
BOTTOM VIEW
POWER ON.
RACE AND CRASH OUT YOUR FRIENDS!
USE THE LAUNCHER OR LAUNCH RAMP TO ADD MORE CARS TO THE ACTION!
HOW MANY MORE CARS CAN YOU ADD WITHOUT GETTING WIPED OUT
IN THE CRASH ZONES?
NOT FOR USE WITH SOME HOT WHEELS®VEHICLES.
NOT FOR USE WITH SOME HOT WHEELS®VEHICLES.
INCLUDES 1 VEHICLE. ADDITIONAL VEHICLES SOLD SEPARATELY.
PRESS TO LAUNCH! SPEED THROUGH THE TRIPLE POWER BOOSTERS
AND LOOPS FOR SUPER STUNTING ACTION!
BACK VIEW
FRONT VIEW
BOTTOM VIEW
BOTTOM VIEW
PRESS FIRMLY.
SIDE VIEW
TO PLAY
a
b
UPPER PART SHOULD GO
INSIDE.
BUILDERS TIP!
UPPER PART SHOULD GO INSIDE.
TROUBLESHOOTING TIPS
REPLACING RUBBER BAND
STEP 8
Q. My vehicle keeps crashing on the track for no reason. What is the problem?
A. Clear all obstructions on the track. Adjust track side walls at each connection point and make
sure they are assembled as described in the assembly steps.
Q. My vehicle keeps slowing down by itself on the track. What
is the problem?
A. Lint may collect around your vehicle's axles. This may
cause the vehicle to run slowly. Use tweezers or a
toothpick to remove lint.
HOOK RUBBER BAND INTO SLOTS ON LAUNCHER.
©2018 Mattel. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Services 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park,
Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel South
Africa (PTY) LTD, Office 102 I3, 30 Melrose Boulevard, Johannesburg 2196. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour
City, Tsimshatsui, HK, China. Tel.: [phone]. Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3 Avenue 7, Bangsar South
City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: [phone].
5. 6.
CRASH ZONES PARKING ZONES
A
A
D
D
E
C
C
B
B
F
F
A
AA
E
E
B
B
C
C
DD
E
F
G
G
K
K
H
H
H
F
F
F
FF
G
G
H
L
L
L
L
H
KK
E
K
X3
X3
CLICK!
CLICK!
CLICK!
CLICK!
CLICK!
®
ADULT ASSEMBLY REQUIRED
K
K
I = ON
O = OFF
This is a battery-operated product.
1 flyer (00001-2908G16) is required
to be placed inside the packaging.
PRESS FIRMLY.
INSTALL BATTERIES FIRST.

1
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE
REFERENCE AS THEY CONTAIN IMPORTANT INFORMATION.
5-10
service.mattel.com
REQUIRES 4 - D SIZE (LR20) ALKALINE BATTERIES (NOT INCLUDED).
DISPOSE OF BATTERIES SAFELY.
COLORS AND DECORATIONS MAY VARY.
84
8
234 5
76
FTB65-0970
PULL BACK THE LAUNCHER AND LOAD YOUR CAR.
76
3. 4.
2.
9. 10.
11.
13.
12.
7.
8.
CONTENTS
APPLY LABELS
4.
1.
2.
3.
INSTRUCTIONS
CORKSCREW CRASH ™
1101664505-DOM G2
AGES
1
2
©2017 Mattel FTB65-0962
1
2
x1
X3
X3
X2
Refer to letters on toy parts and
instructions to help with assembly.
1
1
BATTERY INSTALLATION
• Unscrew the battery cover with a Phillips head screwdriver (not included).
• Install 4 new "D" size (LR20) alkaline batteries (not included) in the orientation (+/-) shown.
• Replace battery cover and tighten screws.
• For longer life use alkaline batteries.
• Replace the batteries if boosters can no longer propel vehicles through track set.
• When exposed to an electrostatic source, the product may malfunction. To resume normal
operation, remove and re-install the batteries.
1.
ASSEMBLY
BOTTOM VIEW
POWER ON.
RACE AND CRASH OUT YOUR FRIENDS!
USE THE LAUNCHER OR LAUNCH RAMP TO ADD MORE CARS TO THE ACTION!
HOW MANY MORE CARS CAN YOU ADD WITHOUT GETTING WIPED OUT
IN THE CRASH ZONES?
NOT FOR USE WITH SOME HOT WHEELS®VEHICLES.
NOT FOR USE WITH SOME HOT WHEELS®VEHICLES.
INCLUDES 1 VEHICLE. ADDITIONAL VEHICLES SOLD SEPARATELY.
PRESS TO LAUNCH! SPEED THROUGH THE TRIPLE POWER BOOSTERS
AND LOOPS FOR SUPER STUNTING ACTION!
BACK VIEW
FRONT VIEW
BOTTOM VIEW
BOTTOM VIEW
PRESS FIRMLY.
SIDE VIEW
TO PLAY
a
b
UPPER PART SHOULD GO
INSIDE.
BUILDERS TIP!
UPPER PART SHOULD GO INSIDE.
TROUBLESHOOTING TIPS
REPLACING RUBBER BAND
STEP 8
Q. My vehicle keeps crashing on the track for no reason. What is the problem?
A. Clear all obstructions on the track. Adjust track side walls at each connection point and make
sure they are assembled as described in the assembly steps.
Q. My vehicle keeps slowing down by itself on the track. What
is the problem?
A. Lint may collect around your vehicle's axles. This may
cause the vehicle to run slowly. Use tweezers or a
toothpick to remove lint.
HOOK RUBBER BAND INTO SLOTS ON LAUNCHER.
©2018 Mattel. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Services 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park,
Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel South
Africa (PTY) LTD, Office 102 I3, 30 Melrose Boulevard, Johannesburg 2196. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour
City, Tsimshatsui, HK, China. Tel.: [phone]. Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3 Avenue 7, Bangsar South
City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: [phone].
5. 6.
CRASH ZONES PARKING ZONES
A
A
D
D
E
C
C
B
B
F
F
A
AA
E
E
B
B
C
C
DD
E
F
G
G
K
K
H
H
H
F
F
F
FF
G
G
H
L
L
L
L
H
KK
E
K
X3
X3
CLICK!
CLICK!
CLICK!
CLICK!
CLICK!
®
ADULT ASSEMBLY REQUIRED
K
K
I = ON
O = OFF
This is a battery-operated product.
1 flyer (00001-2908G16) is required
to be placed inside the packaging.
PRESS FIRMLY.
INSTALL BATTERIES FIRST.

1
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE
REFERENCE AS THEY CONTAIN IMPORTANT INFORMATION.
5-10
service.mattel.com
REQUIRES 4 - D SIZE (LR20) ALKALINE BATTERIES (NOT INCLUDED).
DISPOSE OF BATTERIES SAFELY.
COLORS AND DECORATIONS MAY VARY.
84
8
234 5
76
FTB65-0970
PULL BACK THE LAUNCHER AND LOAD YOUR CAR.
76
3. 4.
2.
9. 10.
11.
13.
12.
7.
8.
CONTENTS
APPLY LABELS
4.
1.
2.
3.
INSTRUCTIONS
CORKSCREW CRASH ™
1101664505-DOM G2
AGES
1
2
©2017 Mattel FTB65-0962
1
2
x1
X3
X3
X2
Refer to letters on toy parts and
instructions to help with assembly.
1
1
BATTERY INSTALLATION
• Unscrew the battery cover with a Phillips head screwdriver (not included).
• Install 4 new "D" size (LR20) alkaline batteries (not included) in the orientation (+/-) shown.
• Replace battery cover and tighten screws.
• For longer life use alkaline batteries.
• Replace the batteries if boosters can no longer propel vehicles through track set.
• When exposed to an electrostatic source, the product may malfunction. To resume normal
operation, remove and re-install the batteries.
1.
ASSEMBLY
BOTTOM VIEW
POWER ON.
RACE AND CRASH OUT YOUR FRIENDS!
USE THE LAUNCHER OR LAUNCH RAMP TO ADD MORE CARS TO THE ACTION!
HOW MANY MORE CARS CAN YOU ADD WITHOUT GETTING WIPED OUT
IN THE CRASH ZONES?
NOT FOR USE WITH SOME HOT WHEELS®VEHICLES.
NOT FOR USE WITH SOME HOT WHEELS®VEHICLES.
INCLUDES 1 VEHICLE. ADDITIONAL VEHICLES SOLD SEPARATELY.
PRESS TO LAUNCH! SPEED THROUGH THE TRIPLE POWER BOOSTERS
AND LOOPS FOR SUPER STUNTING ACTION!
BACK VIEW
FRONT VIEW
BOTTOM VIEW
BOTTOM VIEW
PRESS FIRMLY.
SIDE VIEW
TO PLAY
a
b
UPPER PART SHOULD GO
INSIDE.
BUILDERS TIP!
UPPER PART SHOULD GO INSIDE.
TROUBLESHOOTING TIPS
REPLACING RUBBER BAND
STEP 8
Q. My vehicle keeps crashing on the track for no reason. What is the problem?
A. Clear all obstructions on the track. Adjust track side walls at each connection point and make
sure they are assembled as described in the assembly steps.
Q. My vehicle keeps slowing down by itself on the track. What
is the problem?
A. Lint may collect around your vehicle's axles. This may
cause the vehicle to run slowly. Use tweezers or a
toothpick to remove lint.
HOOK RUBBER BAND INTO SLOTS ON LAUNCHER.
©2018 Mattel. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Services 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park,
Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel South
Africa (PTY) LTD, Office 102 I3, 30 Melrose Boulevard, Johannesburg 2196. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour
City, Tsimshatsui, HK, China. Tel.: [phone]. Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3 Avenue 7, Bangsar South
City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: [phone].
5. 6.
CRASH ZONES PARKING ZONES
A
A
D
D
E
C
C
B
B
F
F
A
AA
E
E
B
B
C
C
DD
E
F
G
G
K
K
H
H
H
F
F
F
FF
G
G
H
L
L
L
L
H
KK
E
K
X3
X3
CLICK!
CLICK!
CLICK!
CLICK!
CLICK!
®
ADULT ASSEMBLY REQUIRED
K
K
I = ON
O = OFF
This is a battery-operated product.
1 flyer (00001-2908G16) is required
to be placed inside the packaging.
PRESS FIRMLY.
INSTALL BATTERIES FIRST.

1
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE
REFERENCE AS THEY CONTAIN IMPORTANT INFORMATION.
5-10
service.mattel.com
REQUIRES 4 - D SIZE (LR20) ALKALINE BATTERIES (NOT INCLUDED).
DISPOSE OF BATTERIES SAFELY.
COLORS AND DECORATIONS MAY VARY.
84
8
234 5
76
FTB65-0970
PULL BACK THE LAUNCHER AND LOAD YOUR CAR.
76
3. 4.
2.
9. 10.
11.
13.
12.
7.
8.
CONTENTS
APPLY LABELS
4.
1.
2.
3.
INSTRUCTIONS
CORKSCREW CRASH ™
1101664505-DOM G2
AGES
1
2
©2017 Mattel FTB65-0962
1
2
x1
X3
X3
X2
Refer to letters on toy parts and
instructions to help with assembly.
1
1
BATTERY INSTALLATION
• Unscrew the battery cover with a Phillips head screwdriver (not included).
• Install 4 new "D" size (LR20) alkaline batteries (not included) in the orientation (+/-) shown.
• Replace battery cover and tighten screws.
• For longer life use alkaline batteries.
• Replace the batteries if boosters can no longer propel vehicles through track set.
• When exposed to an electrostatic source, the product may malfunction. To resume normal
operation, remove and re-install the batteries.
1.
ASSEMBLY
BOTTOM VIEW
POWER ON.
RACE AND CRASH OUT YOUR FRIENDS!
USE THE LAUNCHER OR LAUNCH RAMP TO ADD MORE CARS TO THE ACTION!
HOW MANY MORE CARS CAN YOU ADD WITHOUT GETTING WIPED OUT
IN THE CRASH ZONES?
NOT FOR USE WITH SOME HOT WHEELS®VEHICLES.
NOT FOR USE WITH SOME HOT WHEELS®VEHICLES.
INCLUDES 1 VEHICLE. ADDITIONAL VEHICLES SOLD SEPARATELY.
PRESS TO LAUNCH! SPEED THROUGH THE TRIPLE POWER BOOSTERS
AND LOOPS FOR SUPER STUNTING ACTION!
BACK VIEW
FRONT VIEW
BOTTOM VIEW
BOTTOM VIEW
PRESS FIRMLY.
SIDE VIEW
TO PLAY
a
b
UPPER PART SHOULD GO
INSIDE.
BUILDERS TIP!
UPPER PART SHOULD GO INSIDE.
TROUBLESHOOTING TIPS
REPLACING RUBBER BAND
STEP 8
Q. My vehicle keeps crashing on the track for no reason. What is the problem?
A. Clear all obstructions on the track. Adjust track side walls at each connection point and make
sure they are assembled as described in the assembly steps.
Q. My vehicle keeps slowing down by itself on the track. What
is the problem?
A. Lint may collect around your vehicle's axles. This may
cause the vehicle to run slowly. Use tweezers or a
toothpick to remove lint.
HOOK RUBBER BAND INTO SLOTS ON LAUNCHER.
©2018 Mattel. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Services 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park,
Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel South
Africa (PTY) LTD, Office 102 I3, 30 Melrose Boulevard, Johannesburg 2196. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour
City, Tsimshatsui, HK, China. Tel.: [phone]. Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3 Avenue 7, Bangsar South
City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: [phone].
5. 6.
CRASH ZONES PARKING ZONES
A
A
D
D
E
C
C
B
B
F
F
A
AA
E
E
B
B
C
C
DD
E
F
G
G
K
K
H
H
H
F
F
F
FF
G
G
H
L
L
L
L
H
KK
E
K
X3
X3
CLICK!
CLICK!
CLICK!
CLICK!
CLICK!
®
ADULT ASSEMBLY REQUIRED
K
K
I = ON
O = OFF
This is a battery-operated product.
1 flyer (00001-2908G16) is required
to be placed inside the packaging.
PRESS FIRMLY.
INSTALL BATTERIES FIRST.

1
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE
REFERENCE AS THEY CONTAIN IMPORTANT INFORMATION.
5-10
service.mattel.com
REQUIRES 4 - D SIZE (LR20) ALKALINE BATTERIES (NOT INCLUDED).
DISPOSE OF BATTERIES SAFELY.
COLORS AND DECORATIONS MAY VARY.
84
8
234 5
76
FTB65-0970
PULL BACK THE LAUNCHER AND LOAD YOUR CAR.
76
3. 4.
2.
9. 10.
11.
13.
12.
7.
8.
CONTENTS
APPLY LABELS
4.
1.
2.
3.
INSTRUCTIONS
CORKSCREW CRASH ™
1101664505-DOM G2
AGES
1
2
©2017 Mattel FTB65-0962
1
2
x1
X3
X3
X2
Refer to letters on toy parts and
instructions to help with assembly.
1
1
BATTERY INSTALLATION
• Unscrew the battery cover with a Phillips head screwdriver (not included).
• Install 4 new "D" size (LR20) alkaline batteries (not included) in the orientation (+/-) shown.
• Replace battery cover and tighten screws.
• For longer life use alkaline batteries.
• Replace the batteries if boosters can no longer propel vehicles through track set.
• When exposed to an electrostatic source, the product may malfunction. To resume normal
operation, remove and re-install the batteries.
1.
ASSEMBLY
BOTTOM VIEW
POWER ON.
RACE AND CRASH OUT YOUR FRIENDS!
USE THE LAUNCHER OR LAUNCH RAMP TO ADD MORE CARS TO THE ACTION!
HOW MANY MORE CARS CAN YOU ADD WITHOUT GETTING WIPED OUT
IN THE CRASH ZONES?
NOT FOR USE WITH SOME HOT WHEELS®VEHICLES.
NOT FOR USE WITH SOME HOT WHEELS®VEHICLES.
INCLUDES 1 VEHICLE. ADDITIONAL VEHICLES SOLD SEPARATELY.
PRESS TO LAUNCH! SPEED THROUGH THE TRIPLE POWER BOOSTERS
AND LOOPS FOR SUPER STUNTING ACTION!
BACK VIEW
FRONT VIEW
BOTTOM VIEW
BOTTOM VIEW
PRESS FIRMLY.
SIDE VIEW
TO PLAY
a
b
UPPER PART SHOULD GO
INSIDE.
BUILDERS TIP!
UPPER PART SHOULD GO INSIDE.
TROUBLESHOOTING TIPS
REPLACING RUBBER BAND
STEP 8
Q. My vehicle keeps crashing on the track for no reason. What is the problem?
A. Clear all obstructions on the track. Adjust track side walls at each connection point and make
sure they are assembled as described in the assembly steps.
Q. My vehicle keeps slowing down by itself on the track. What
is the problem?
A. Lint may collect around your vehicle's axles. This may
cause the vehicle to run slowly. Use tweezers or a
toothpick to remove lint.
HOOK RUBBER BAND INTO SLOTS ON LAUNCHER.
©2018 Mattel. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Services 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park,
Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel South
Africa (PTY) LTD, Office 102 I3, 30 Melrose Boulevard, Johannesburg 2196. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour
City, Tsimshatsui, HK, China. Tel.: [phone]. Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3 Avenue 7, Bangsar South
City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: [phone].
5. 6.
CRASH ZONES PARKING ZONES
A
A
D
D
E
C
C
B
B
F
F
A
AA
E
E
B
B
C
C
DD
E
F
G
G
K
K
H
H
H
F
F
F
FF
G
G
H
L
L
L
L
H
KK
E
K
X3
X3
CLICK!
CLICK!
CLICK!
CLICK!
CLICK!
®
ADULT ASSEMBLY REQUIRED
K
K
I = ON
O = OFF
This is a battery-operated product.
1 flyer (00001-2908G16) is required
to be placed inside the packaging.
PRESS FIRMLY.
INSTALL BATTERIES FIRST.

1
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE
REFERENCE AS THEY CONTAIN IMPORTANT INFORMATION.
5-10
service.mattel.com
REQUIRES 4 - D SIZE (LR20) ALKALINE BATTERIES (NOT INCLUDED).
DISPOSE OF BATTERIES SAFELY.
COLORS AND DECORATIONS MAY VARY.
84
8
234 5
76
FTB65-0970
PULL BACK THE LAUNCHER AND LOAD YOUR CAR.
76
3. 4.
2.
9. 10.
11.
13.
12.
7.
8.
CONTENTS
APPLY LABELS
4.
1.
2.
3.
INSTRUCTIONS
CORKSCREW CRASH ™
1101664505-DOM G2
AGES
1
2
©2017 Mattel FTB65-0962
1
2
x1
X3
X3
X2
Refer to letters on toy parts and
instructions to help with assembly.
1
1
BATTERY INSTALLATION
• Unscrew the battery cover with a Phillips head screwdriver (not included).
• Install 4 new "D" size (LR20) alkaline batteries (not included) in the orientation (+/-) shown.
• Replace battery cover and tighten screws.
• For longer life use alkaline batteries.
• Replace the batteries if boosters can no longer propel vehicles through track set.
• When exposed to an electrostatic source, the product may malfunction. To resume normal
operation, remove and re-install the batteries.
1.
ASSEMBLY
BOTTOM VIEW
POWER ON.
RACE AND CRASH OUT YOUR FRIENDS!
USE THE LAUNCHER OR LAUNCH RAMP TO ADD MORE CARS TO THE ACTION!
HOW MANY MORE CARS CAN YOU ADD WITHOUT GETTING WIPED OUT
IN THE CRASH ZONES?
NOT FOR USE WITH SOME HOT WHEELS®VEHICLES.
NOT FOR USE WITH SOME HOT WHEELS®VEHICLES.
INCLUDES 1 VEHICLE. ADDITIONAL VEHICLES SOLD SEPARATELY.
PRESS TO LAUNCH! SPEED THROUGH THE TRIPLE POWER BOOSTERS
AND LOOPS FOR SUPER STUNTING ACTION!
BACK VIEW
FRONT VIEW
BOTTOM VIEW
BOTTOM VIEW
PRESS FIRMLY.
SIDE VIEW
TO PLAY
a
b
UPPER PART SHOULD GO
INSIDE.
BUILDERS TIP!
UPPER PART SHOULD GO INSIDE.
TROUBLESHOOTING TIPS
REPLACING RUBBER BAND
STEP 8
Q. My vehicle keeps crashing on the track for no reason. What is the problem?
A. Clear all obstructions on the track. Adjust track side walls at each connection point and make
sure they are assembled as described in the assembly steps.
Q. My vehicle keeps slowing down by itself on the track. What
is the problem?
A. Lint may collect around your vehicle's axles. This may
cause the vehicle to run slowly. Use tweezers or a
toothpick to remove lint.
HOOK RUBBER BAND INTO SLOTS ON LAUNCHER.
©2018 Mattel. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Services 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park,
Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel South
Africa (PTY) LTD, Office 102 I3, 30 Melrose Boulevard, Johannesburg 2196. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour
City, Tsimshatsui, HK, China. Tel.: [phone]. Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3 Avenue 7, Bangsar South
City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: [phone].
5. 6.
CRASH ZONES PARKING ZONES
A
A
D
D
E
C
C
B
B
F
F
A
AA
E
E
B
B
C
C
DD
E
F
G
G
K
K
H
H
H
F
F
F
FF
G
G
H
L
L
L
L
H
KK
E
K
X3
X3
CLICK!
CLICK!
CLICK!
CLICK!
CLICK!
®
ADULT ASSEMBLY REQUIRED
K
K
I = ON
O = OFF
This is a battery-operated product.
1 flyer (00001-2908G16) is required
to be placed inside the packaging.
PRESS FIRMLY.
INSTALL BATTERIES FIRST.