Maxell MA-XL1 User manual

MA-XL1
Lecture Capture Station
User’s Manual (concise)
Please read through this manual before using this product, in order to use safely and
utilize well the product.
使用说明书 ( 简易版 )
为了您能够更安全舒适地使用本产品，请在使用本产品前请仔细阅读本说明书。
LR

ENGLISH
01
WARNING
!
• Before using this product, be sure to read all manuals for the product. After
reading them, store them in a safe place for future reference.
• Heed all the warnings and cautions in the manuals or on the product.
• Follow all the instructions in the manuals or on the product.
MA-XL1
Lecture Capture Station
User’s Manual (concise)
Thank you for purchasing this Lecture Capture Station.
This is the basic manual on the product. Visit our website to get the detailed manuals
(Safety Guide, Operating Guide) and the latest information on the product.
Check them before using the product, for safe use and utilization of the product.
Our website: Please see the attached sheet

ENGLISH
02
Contents
First of all
Graphical symbols explanation
First of all
Graphical symbols explanation
Important Safety Instructions
Disposal of Old Equipment and Batteries Only for European Union
and countries with recycling systems
Note for the battery symbol (bottom symbol)
About Electro-Magnetic Interference
Package accessories
Placement
Product connection
Connecting the power supply
Product setup
Connection
Basic operations
Turning on the power
Turning o the power
Specications
Manufacturing year and month
(Page no.)
02
02
03
03
04
04
05
06
07
08
09
09
11
11
11
12
14
The following entries and graphical symbols are used for the manuals and the product
as follows, for safety purpose. Know their meanings beforehand and heed them.
This entry warns of a risk of
serious personal injury or even
death.
This entry warns of a risk of
personalinjury or physical
damage.
This entry notices of fear of
causing trouble.
WARNING
CAUTION
NOTICE
!
!
Warning / Caution
Turns the power on/o
Starts recording
Stops recording
Switches channel
Information
Projector power on/o
Audio output
!


ENGLISH
Disposal of Old Equipment and Batteries Only for European Union
and countries with recycling systems
The above mark is in compliance with the Waste Electrical and Electronic Equipment
Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose
the equipment including any spent or discarded batteries as unsorted municipal waste,
but use the return and collection systems available. If the batteries or accumulators
included with this equipment display the chemical symbol Hg, Cd, or Pb, then it means
that the battery has a heavy metal content of more than 0.0005% Mercury, or more
than 0.002% Cadmium or more than, 0.004% Lead.
03
Important Safety Instructions
The followings are important instructions for safely using the product. Be sure to follow
them when handling the product. The manufacturer assumes no responsibility for any
damage caused by mishandling that is beyond normal usage dened in these manuals
of this product.
• Never use the product in or after an abnormality (for example, giving o smoke, smelling
strange, nding a foreign object inside, and so on.) If an abnormality should occur,
unplug the product urgently.
• This product is suitable for adults who have the ability to operate this machine. Situate
the product away from children and pets.
• Keep small parts away from children and pets. If swallowed, consult a physician
immediately for emergency treatment.
• Do not use the product during electrical storms.
• Unplug the product from the power outlet if the product is not being used.
• Do not open or remove any portion of the product, unless the manuals direct it. For
internal maintenance, leave it to your dealer or their service personnel.
• Use only the accessories specied or recommended by the manufacturer.
• Do not modify the product or accessories.
• Do not let any things or any liquids enter to the inside of the product.
• Do not get the product wet.
• Do not place the product where any oils, such as cooking or machine oil, are used. Oil
may harm the product, resulting in malfunction, or falling from the mounted position.
• Do not apply a shock or pressure to this product.
- Do not place the product on an unstable place such as the uneven surface or the
leaned table.
- Ensure the product is stable. Place the product so that it does not protrude from the
surface where the product is placed on.
- Place your hands on the grip on the bottom of the product when carrying it.
- Remove all the attachments including the power cord and cables, from the main device
when carrying it.
• Do not approach the exhaust vents, while the product is on.
WARNING
!

ENGLISH
CAUTION
!
About Electro-Magnetic Interference
This symbol might be used in combination with a chemical symbol. In this case it
complies with the requirement set by the Directive for the chemical involved.
This is a Class A product. In a domestic environment this device may cause radio
interference in which case the user may be required to take adequate measures.
This device may cause interference if used in residential areas. Such use must be
avoided unless the user takes special measures to reduce electromagnetic emissions to
prevent interference to the reception of radio and television broadcasts.
– the ventilation should not be impeded by covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc.:
– no naked ame sources, such as lighted candles, should be placed on the apparatus;
– attention should be drawn to the environmental aspects of battery disposal;
– the use of apparatus in tropical climates.
the instructions for use shall state that the apparatus shall not be exposed to dripping
or splashing and that no objects lled with liquids, such as vases, shall be placed on the
apparatus.
Hereby, Maxell, Ltd., declares that the radio equipment type Lecture Capture Station is
in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address:
http://www.maxell.eu/uploads/docs/PJ-DoC.pdf
Note for the battery symbol (bottom symbol)
04

ENGLISH
Package Accessories
Your product should come with the items shown below. Check that all the items are
included. Contact your dealer immediately if any items are missing.
05
Power adaptor
Power cord *
Bluetooth® Antenna
Balance line connector (2 units)
DIDO connector
USB number keyboard stickers
Rack mount bracket (1 pair) + M4 x 6mm screw (8 units)
User’s manual (concise)**
URL sheet
* The number of power cords varies depending on the region.
** This concise is a basic manual. For details, consult the “Operating Guide” from our
website before using. (1)
1
6
3
8
2
7
4
5
9
6
45
31 2
97 8
NOTICE
• Keep small parts away from children and pets. Take care not to put in the mouth. If
swallowed, consult a physician immediately for emergency treatment.
• Keep the original packing materials for future reshipment. Be sure to use the original
packing materials when moving the product.
WARNING
!
MA-XL1
Lecture Capture Station
User’s Manual (concise)
Please read through this manual before using this product, in order to use safely and
utilize well the product.
使用说明书 ( 简易版 )
为了您能够更安全舒适地使用本产品，请在使用本产品前请仔细阅读本说明书。
LR
QR92741
(ENGLISH)
Thank you for purchasing this Lecture Capture Station.
Before using this product, be sure to read all manuals for this product.
Please check the above web address where you may nd the latest information for this product.
(简体中文 )
承蒙您购买本智能录播一体机，谨向您表示衷心的感谢。
在使用本产品前，请仔细阅读本产品之所有说明书。
欢迎访问上述网站，以取得本产品之最新信息。
Printed in Taiwan
2021MAXL00
http://biz.maxell.com/en/display_equipment/

ENGLISH
06
Please set this product to level. This product can be mounted into a rack (for 19-inch
rack) with the
provided “rack mount bracket”. When attaching the rack mount bracket to the main
unit, be sure to use the provided screws. For details, consult the Operating Guide. (1)
Please follow the manual of the rack to mount.
Please take a distance of more than 2 cm between the product and the wall.
Placement
CAUTION
!
• Install the product where you can access the power outlet easily.
• Do not install the product near thermally conductive or ammable things.
• Do not place the product in a place where it may get wet.
• Do not place the product where any oils, such as cooking or machine oil, are used. Oil
may harm the product, resulting in malfunction, or falling from the mounted position.
• Install the product in a stable horizontal position.
- Do not put the product on its side, front or rear position
- Do not attach nor place anything on the product unless otherwise specied in the manual.
• Do not block the intake vents and exhaust vents of the product. If the intake vents and
exhaust vents of the product are blocked, the accumulated inside heat may cause re.
• When attaching the rack mount to the main unit, be sure to use the provided screws.
Using other screws may cause failure, re, or electric shock.
• Place the product in a cool place with sucient ventilation.
- Do not stop up, block nor cover the product’s vent holes.
- Do not place the product at places that are exposed to magnetic elds, doing so can
cause the cooling fans inside the product to malfunction.
• Avoid placing the product in smoky, humid or dusty place.
- Do not place the product near humidiers.
• Do not place the product in a place where radio interference may be caused.
2 cm or greater2 cm or greater
NOTICE
WARNING
!

ENGLISH
07
Before connecting the product to a device, consult the manual of the device to conrm
that the device is suitable for connecting with this product and prepare the required
accessories, such as a cable in accord with the signal of the device.
Consult your dealer when the required accessory did not come with this product or the
accessory is damaged.
After making sure that this product and the devices are turned off, perform the
connection, according to the following instructions.
For details, consult the Operating Guide. (1)
Product connection
• Use only the appropriate accessories. Otherwise it could cause a re or damage the product
and devices.
- Use only the accessories specied or recommended by this product’s manufacturer. It
may be regulated under some standards.
- Neither disassemble nor modify this product and the accessories.
- Do not use the damaged accessory. Be careful not to damage the accessories. Route a
cable so that it is neither stepped on nor pinched.
• Before connecting this product to a network system, be sure to obtain the consent of the
administrator of the network.
• Do not connect the WAN/LAN port to any network that might have the excessive voltage.
• If you use the product connected to the network, there is a risk of information leakage via
the product. Also, since there is a fear of illegal operation, please be sure to perform
network security measures including the following countermeasures under the responsibility
of the customer.
- Use the product on a network that is secured with a rewall etc.
- When using the product on a system to which a PC is connected, it checks and removes
infections of computer viruses and malicious programs on a regular basis.
- Change the password of admin / director / video manager, and limit the users who can
login. For details, consult the Operating Guide. (1)
- Do not leak video data, authentication information (user name, password), various server
information, etc. on the network.
- Do not install the product or its cable in places where it can be easily change connection.
• Do not turn on or o this product while connected to a device in operation, unless that is
directed in the manual of the device.
• Some input ports are selectable in the use. For details, consult the Operating Guide. (1)
• Be careful not to mistakenly connect a connector to a wrong port.
CAUTION
!
NOTICE
WARNING
!

ENGLISH
08
Connecting the power supply
1. Connect the power cord to the Power adaptor.
2. Put the DC plug of the power adaptor into the DC 24V connector of the product.
3. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the
power supply connection, the POWER indicator lights up in steady red.
• Use extra caution when connecting the power cord, as incorrect or faulty connections may
result in re and/or electrical shock.
- Do not touch the power cord with a wet hand.
- Only use the Power cord and the Power adaptor that came with the product. If it is
damaged, consult your dealer to get a new one. Never modify the power cord and the
Power adaptor.
- Only plug the power cord into an outlet whose voltage is matched to the power cord. The
power outlet should be close to the product and easily accessible. Remove the power cord
for complete separation.
- Do not distribute the power supply to multiple devices. Doing so may overload the outlet
and connectors, loosen the connection, or result in re, electric shock or other accidents.
- Connect the terminal for the AC inlet of power adaptor to the power outlet of the building
using an appropriate power cord (bundled).
- When multiple power cords are included, please use the power cord that matches the
outlet shape.
- Do not use with the power adaptor hanging.
- Do not trample the power adaptor or cord.
• This power adaptor is also designed for IT power systems with a phase-to-phase voltage of
220 to 240 V.
Power button / indicator
DC plug
Power adaptor Power cord
NOTICE
WARNING
!

ENGLISH
09
The input port assignment must be set up from web browser by the administrator. For
details, consult the Operating Guide. (1)
Please turn o this product when hook up other devices. For how to turn o the power,
consult the "Turn o the power".
Consult the below wiring schematic.
Product setup
Connection
(continued on next page)
Mic audio inputVideo output VGA / HDMI
Video input VGA / HDMI
Line audio output
Projector Microphone Bluetooth
speakerphone
USB drive
USB
Document camComputer
DV PTZ camera
Video input SDI
HD-SDI
camera
Audio input/output
USB DI/DO USB
USB
WAN
LAN
Hard drive
Audio mixer
Computer
Computer
Network
Power
RS-232
out
RS-232
in
Antenna
Projector
Network camera
Speaker with
an amplier
Line audio input
I/O devices
PTZ camera
Computer

ENGLISH
10
• Consult the administrator of Network before connecting to WAN/LAN port.
• Do not connect the LAN port to any network that might have the excessive voltage.
• Incorrect connection may cause the malfunction. Please connect cables with care.
• Turn o the speaker and this product at connection to avoid unexpected large volume ow.
• Adjust volume with care when using an amplied speaker.
• Before connecting, consult the manual of device that is using with this product.
• The Length of LAN cable must be equal or less than 100m. When the length is over 100m,
it may cause the quality loss on the image/sound or malfunction on network
communication.
• The Length of BNC cable must be equal or less than 100m.
• Use RJ-45 connector when connecting to WAN/LAN port.
• When connecting to USB TYPE A (INTERACTIVE), use USB cable with ferrite core.
• For details, consult the Operating Guide. (1)
Connection (continued)
CAUTION
!
NOTICE

ENGLISH
• Turn on any connected devices prior to the product.
• After turning o the power, if the indicator is light in red it is possible to turn on the power.
• Remove the power cord for complete separation.
• Turn o any connected devices prior to the product power o.
Press the power button to start automatically.
When the power button is pressed, the power indicator lights red and green alternately.
When startup is completed, the indicator lights in steady green.
1. Press the POWER button on the product. The message “Shutdown?” appears on the
screen for about 10 seconds.
2. Press the POWER button again while the message appears. the POWER indicator will
begin blinking in red. Then the POWER indicator will stop blinking and light in steady
red when shutdown completed.
Basic operations
Turning on the power
Turning o the power
11
Power button / indicator
Power button / indicator
1. Make sure that the Power adaptor and power cord is rmly and correctly connected
to the product and the outlet.
2. Make sure that the POWER indicator is lighted in steady red.
3. Press the (power) button on the product.
NOTICE
WARNING
!

ENGLISH
12
Specications
Item Specication
Product Name Lecture Capture Station
Model Name MA-XL1
Dimension
Approx. 430 mm(W) x 60 mm(H) x 206 mm(D)
(without rackmount)
Approx. 480 mm(W) x 60 mm(H) x 206 mm(D)
(with rackmount)
Weight (mass) Approx. 3.0 kg
Power Requirement DC : 24V/2.5A
AC : 100~240V/1.5A
Power Consumption (Max.) 60W (Max.)
Operating Temperature / Humidity 0ºC ~ 40ºC / 10% ~ 90% RH
WAN, LAN 10 / 100 / 1000Mbps
Ports
Front audio output .............
SDI IN 1 ...................................................
SDI IN 2 ...................................................
SDI IN 3 ...................................................
HDMI IN 1 ......................................
HDMI IN 2 ......................................
HDMI IN 3 ......................................
HDMI IN 4 ......................................
COMPUTER IN ........................
MONITOR OUT .......................
HDMI OUT ......................................
AUDIO IN .........................
MIC IN .............................
AUDIO OUT ......................
AUDIO IN(L,R) ...................
AUDIO OUT(L,R) ................
USB TYPE A ...........................................
USB TYPE A(INTERACTIVE) .....................
USB TYPE B 1 ........................................
USB TYPE B 2 ........................................
WAN ........................................................
LAN 1 ......................................................
LAN 2 ......................................................
LAN 3 ......................................................
CONTROL 1 .................................
CONTROL 2 .................................
DIDO .................................
Bluetooth antenna .....................................
(continued on next page)
3.5 mm (stereo) mini jack x1
BNC jack x1
BNC jack x1
BNC jack x1
HDMI connector x1
HDMI connector x1
HDMI connector x1
HDMI connector x1
D-sub 15 pin mini jack x1
D-sub 15 pin mini jack x1
HDMI connector x1
3.5 mm (stereo) mini jack x1
3.5 mm (stereo) mini jack x1
3.5 mm (stereo) mini jack x1
detachable terminal block x1
detachable terminal block x1
USB Type A x3
USB Type A x1
USB Type B x1
USB Type B x1
RJ45 jack x1
RJ45 jack x1
RJ45 jack x1
RJ45 jack x1
Mini DIN 8 pin jack x1
Mini DIN 8 pin jack x1
detachable terminal block x1
SMA jack x1

ENGLISH
No. Name Brief introduction
1Audio volume meter Display audio level
2Bluetooth pairing
indicator Show Bluetooth connection status
3USB indicator Show front USB storage status
4Recording start button Recording start and pause
5Recording stop button Recording stop
6Video switch button Video source switch; cycling switch for each assigned source
7Information button
Short push: Information list appears and USB control switch
back from PC to the product
Long push: Approx. 2 sec. Bluetooth pairing start
8Projector power button Power on / o button of PJLink compatible projector or Hitachi
/ Maxell projector.
9Main power button Power on / o button for MA-XL1
10 Power connector DC : 24V / 2.5A
11 Reset Users are not allowed to use this reset.
For service personnel only.
12 Security bar Security bar
Front
Back
1
10 11 12
2798
4 5 6
3
13
Specications (continued)

ENGLISH
Manufacturing year and month
The manufacturing year and month of this product is indicated as follows in the serial
number of the rating label on the product.
Example:
T 9 A W 0 0 0 0 0 1
• The information in this manual is subject to change without notice.
• The illustrations shown in this manual are example only. Your product may dier from the
illustrations.
• The reproduction, transfer or copy of all or any part of this document is not permitted
without express written consent.
Manufacturing month: A=January, B=February, ... L=December
Manufacturing year: 9=2019, 0=2020, 1=2021, ...
14
NOTICE

简体中文
01
警 告
!
• 使用本产品前，务必阅读本产品的所有说明书。阅读后，请妥善保管以备日后参考。
• 请阅读说明书中或产品上的警告和注意事项。
• 请遵守说明书中或产品上的所有说明。
MA-XL1
智能录播一体机
使用说明书 ( 简易版 )
承蒙您购买本产品，谨向您表示衷心的感谢。
本说明书仅对基础使用进行说明，请访问我们的网站取得本产品之详细说明书 ( 操作指南及安全指
南 )，了解本产品的最新信息。
为了您能够更安全舒适地使用本产品，请在使用本产品前仔细阅读所有说明书。
欢迎访问我们的网站：网址请参阅附件

简体中文
02
目 录
首要
条目与图示符号解释
首要
条目与图示符号解释
安全指示要点
关于废弃电气和电子设备
电池标志要点
关于电磁干扰
物品清单
布置
连接各个设备
连接电源
设定
连接
基本操作
开启电源
关闭电源
规格
制造年月
(页码)
02
02
03
03
03
04
05
06
07
08
09
09
11
11
11
12
14
以下条目和图示符号均用于安全目的，在本说明书和本产品中的使用如下。请预先了解这些条目和
图示符号的含义，并予以留意。
本符号用于警告有严重人身伤害甚至
死亡的危险。
本符号用于警告有人身伤害或是物质
受损的危险。
本条目用于告知可能会导致故障。
通 告
警 告
!
注 意
!
警告 / 注意
开启 / 关闭电源
启动录像
停止录像
频道切换
信息
开启 / 关闭投影机电源
音频输出
!


简体中文
关于废弃电气和电子设备
标志符合废电机电子设备指令 2012/19/EU(WEEE) 的规范。标志要求，不要将包括废旧电池、
损坏电池或蓄电池在内的设备当作一般城市废物来处理，而是要使用可用的回收和采集系统。如果
该设备包含的电池或蓄电池显示了化学符号 Hg 、Cd 或Pb，表示电池含有高于 0. 0005% 汞、
高于 0. 002% 镉或高于 0. 004% 铅的重金属成分。
本标志可与化学标志结合使用。在这种情况下，它符合有关化学品的指令规定要求。
03
安全指示要点
以下是关于安全使用本产品的重要指示。在操作本产品时，请务必始终按照这些指示。对于因超出
此产品说明书所述的正常使用范围之外的不当操作而引起的任何损失，生产商恕不承担责任。
• 请勿在异常 ( 例如 : 冒烟、异昧、内部有液体或异物、破裂等 ) 发生时或发生之后使用本产品。如果发
生异常现象，应立即拔下本产品之电源插头。
• 本产品仅限具备能力操作本产品之成人使用，请将本产品放置在远离儿童和宠物的地方。
• 请将小零件放置在远离儿童和宠物的地方。如果吞下，立即咨询医生以进行紧急治疗。
• 请勿在雷电情况下使用本产品。
• 如果当前不使用本产品，请将本产品插头从电源插座上拔下。
• 请勿擅自打开或拆卸本产品的任何部分，除非本说明书有所指示。内部维护应交给您的经销商或其服务
人员。
• 请使用制造商指定或推荐的附件。
• 请勿擅自己改装本产品及其附件。
• 请勿使任何物体或液体进入本产品内部。
• 请勿弄湿本产品。
• 请勿将本产品放置在使用任何油品（如烹饪油或机油）的地方。油品可能会损坏本产品，导致故障或从
安装位置掉落。
• 请勿敲击或挤压本产品。
- 请勿将本产品放置在不平稳的地方，例如不平坦的表面或倾斜的桌面等。
- 请勿不平稳地放置本产品。放置本产品时，请勿使本产品超出其放置的表面。
- 搬运本产品时，请将手放在产品底部。
- 搬运本产品时，应拆下本产品上的所有附件，包括电源线和电缆。
• 本产品运作时，请勿靠近出风口。
电池标志要点
警 告
!

简体中文
注 意
!
关于电磁干扰
这是 A类产品。 在家庭环境中，本设备可能引起无线电干扰，在这种情况下，可能要求用户采取
适当的措施。
如果在住宅区使用，本设备可能会造成干扰。 除非用户采取特殊措施减少电磁辐射以防止干扰无
线电和电视广播的接收，否则必须避免于住宅区使用。
- 不得用报纸、桌布、窗帘等物品盖住通风口。
- 不得在设备上放置裸露火源，如点燃的蜡烛。
- 应注意电池处理的环境方面规定。
- 在热带气候中使用设备。
- 说明书中应描述设备不可暴露在滴水或溅水的环境中，且不得在设备上放置装有液体的物体，
如花瓶。
因此，Maxell，Ltd. 公司声明无线电设备类型 Lecture Capture Station 符合指令
2014/53/EU。
欧盟符合性声明的全文可在以下网址获取：
http://www.maxell.eu/uploads/docs/PJ-DoC.pdf
04

简体中文
物品清单
请小心打开包装，并检查是否包含下列所有物品。如果缺少任何物品，请立即与本产品销售商联系。
05
电源适配器
电源线 *
蓝牙天线
平衡音频线连接器 (2个)
DIDO 连接器
USB 数字键盘贴纸
机柜支架 ( 一对 )+M4 x 6mm 螺丝钉 (8个)
使用说明书 ( 简易版 )**
URL 说明页
* 电源线的数量因地区而异。
** 本说明书仅对基础使用进行说明，使用前请访问我们的网站并阅读本产品之”操作指南”(1)
1
5
3
7
2
6
4
8
通 告
• 请将小零件放置在远离儿童和宠物的地方。注意勿将小零件放入嘴巴，如果不小心吞下，请立即咨询医
生以进行紧急治疗。
• 请妥善保管员包装材料以便将来重新包装。搬运本产品时，请务必使用原包装材料，搬运时请小心避
免碰撞。
警 告
!
6
45
31 2
97 8
MA-XL1
Lecture Capture Station
User’s Manual (concise)
Please read through this manual before using this product, in order to use safely and
utilize well the product.
使用说明书 ( 简易版 )
为了您能够更安全舒适地使用本产品，请在使用本产品前请仔细阅读本说明书。
LR
QR92741
(ENGLISH)
Thank you for purchasing this Lecture Capture Station.
Before using this product, be sure to read all manuals for this product.
Please check the above web address where you may nd the latest information for this product.
(简体中文 )
承蒙您购买本智能录播一体机，谨向您表示衷心的感谢。
在使用本产品前，请仔细阅读本产品之所有说明书。
欢迎访问上述网站，以取得本产品之最新信息。
Printed in Taiwan
2021MAXL00
http://biz.maxell.com/en/display_equipment/
9