Maxell MXES-FR230 User manual

Foot Use EMS Sport Device
MXES-FR230
Thank you for buying this product. Please read this user manual in advance and use the product safely.
Please keep this user manual for future reference.
User Manual
PA1520-00
12
11
Index
Introduction 2
2
6
6
Safety caution
Name of each part
Usage
Maintenance
Troubleshooting
1
2
3
4
5
6
713
Device disposal
813
Specification

Accessories
※Inside the storage pouch
2
Controller
Storage Pouch ×1
Remote Control × 1
Trial Battery
Before reading the instruction manual
Disclaimer
This instruction manual is subject to change without notice.
In order to improve the product, appearance of some parts or specications may be changed without notice.
Unauthorized duplication of part or all of this instruction manual is prohibited except for personal use.
Moreover, without permission.
We assume no responsibility for any damage caused by re, earthquake, action by any third party,
other accidents, customer’s intention or fault, incorrect use, or use under other abnormal conditions.
The warranty stated in the warranty certicate is all we warrant, and we do not warrant anything except for this
warranty including express warranty and implied warranty.
We assume no responsibility for any damage caused by any usage not described in this Instruction Manual.
This product is not intended for use with equipment and devices related to human life such as medical
equipment and devices, nuclear equipment and devices, aerospace equipment and devices, transportation
equipment, and equipment and devices which require a high standard of reliability. We assume no
responsibility if this product is used for the control systems of these types of equipment and devices and if any
injury or re occurs due to failure of the product.
Main Unit
USB Charging Cable
(approx. 50cm) × 1
Power Adapter × 1
Contents of the box
Please be sure to observe it for safe use.
Danger
Warning
Caution
Danger refers to misuse which might lead to death or
serious injury*1to a high degree.
Warning refers to misuse which might lead to death or
serious injury*1.
Caution refers to misuse which might lead to injury*2
and may cause property damage*3.
1Introduction
2Safety caution
(CR2032) ×1
Quick Guide User manual
(Installed in the
remote control)
*1: Severe injury is indicated by those
that have after effects such as
blindness, injury, burns (high
temperature burns/ low
temperature burns, chemical
burns), electric shock, fracture,
poisoning, etc. and those
requiring hospitalization or
long-term regular hospital visits
for treatment.
*2: Injury refers to burns, electric
shock which do not result in
hospitalisation or long-term
follow-up.
*3: Damages refers broad damages to
houses or properties and
domestic animal / pets.

Example of symbols
Prohibited actions when handling the product.
Graphic symbols representing specic instructions are shown in black color in the shape
shape of .
Caution to re, electric shock, high temperature when handling the product.
Graphic symbols representing specic instructions are shown in black color in the
shape of .
Instruction which must be followed.
Graphic symbols representing specic instructions are shown in white color in the of ●.
3
Danger
Prohibited to use with the following electronic medical equipment
(1) Heart rate regulator implanted in the body.
(2) Medical equipment to maintain life such as cardiopulmonary machine, etc.
(3) ECG and other external electronic medical equipment. It may cause medical electronics
accidents and impediment to the body.
Do not touch leaked liquid
If liquid leaks from this device and gets into the eye, do not rub. Rinse with plenty of clean
water immediately and consult a doctor. It may cause blindness.
Keep batteries out of reach of children
Children may swallow the battery. If a battery is swallowed, it may cause death. Consult a
doctor immediately for instructions.
Warning
• The following people must consult the doctor before use
(1) People with acute disease. (2) People with malignant tumor.
(3) People with infectious disease. (4) Pregnant women or shortly after delivery.
(5) People with heart failure. (6) People with fever. (7) People with anemia.
(8) People with infection, wounds, etc. on skin surrounding the application area.
(9) People with abnormal blood pressure.
(10) People who feel an abnormality and need resting.
(11) People with vertebral fracture, sprains, muscle torn or similar acute (pain) disease.
(12) People with perceptual disorders resulting from advanced endovascular
disorders due to diabetes, etc.
(13) People who have undergone plastic surgery or breast augmentation surgery.
(14) Except the above mentioned, who feel an abnormality on their body.
It may cause accident or physical deterioration.
• The following people must not use the device
(1) People who are consuming or recently consumed alcohol. (2) People under 18
(3) Person who weighs more than 100 kg
• If you feel unwell, stop use immediately
This may cause accidents or physical deterioration.
• Do not use near your heart, head, face, eyes, neck or vulva
This may cause accidents or physical deterioration.
• Do not use in highly humid locations such as bathroom
This may cause overheating, electric shock, malfunction, mold or rust.

4
• Do not put into heating appliances such as microwave ovens or pressure
cookers
This may cause overheating, smoke or re.
• Do not operate with wet hands
This may cause overheating, shock, malfunction.
• Do not pour liquid or water on the device
This may cause overheating, smoke, re, rupture, malfunction or injury.
• Store in a place out of a child's reach
This may cause accidents or physical deterioration.
• Do not sleep during use
This may cause accidents or injury.
• Do not wear metal accessories such as necklaces during use
This may cause strong electric shock.
• Do not disassemble or remodel
This may cause overheating, smoke, re, rupture, liquid leak, malfunction or injury
• Stop using broken devices
This may cause accidents or injury.
•Do not use multiple devices at the same time
This may cause accidents or injury.
•Do not use with other EMS devices
This may cause accidents or injury.
•Do not use while standing
This may cause accidents or injury.
•Do not carry out housework involving water, knives or fire during use
This may cause accidents or injury.
•Do not short the terminals
This may cause overheating, electric shock, malfunction or injury.
•Do not put into fire
This may cause smoke, fire or
rupture.
• Charge within 10-35°C
Charging out of this temperature range may result in liquid leak, overheating,
rupture or malfunction.
• Do not forcibly press the device
This may deform, liquid leak, overheating, re, rupture or malfunction.
• Do not use the device on the same body part for more than once a day
Even up to 2 dierent parts per day.
• Do not use continuously
Continuous usage may result in muscular or neuropathic pain.
Caution
• Do not use other electrical devices such as mobile phones during use
This may cause accidents.
• Do not use before or whilst driving
This may cause trac accidents.

5
●
The remote control of this product (hereafter, this remote control) uses the 315 MHz frequency band
In this frequency band, it is used for wireless keys of front doors and remote control key for car as well as for
specic low-power devices such as telemeters, telecontrols and data transmission.
1．If you use a cardiac pacemaker, please consult the medical device manufacturer as it uses a specied
low-power.
2．Before using this remote control, make sure that there are no specic low-power devices such as telemeters,
telecontrols and data transmissions nearby.
3．In the unlikely event that this remote control causes harmful radio wave interference with a specic
low-power device, immediately change the location or operate the controller without using the remote
control.
4．If you have any other problems, such as harmful radio wave interference caused by using this remote
controller, please contact our “Customer Support Center”.
Precautions for using the remote control
• Do not place flammable or heavy objects on the device, or cover the device
with foreign objects such as towels or cushions
This may cause overheating, re, rupture, liquid leak.
• Do not use for purposes other than body training, relaxation
This may cause accidents or injury.
• Do not exercise while using this product
This may cause injury.
• Charge once every 3 months
The battery will deteriorate and cannot be used.
• Use only the attached power adapter and charging cable
This may cause overheating, re, rupture or malfunction.
• Do not use the power adapter or charging cable for anything other than this
product
This may cause overheating, re, rupture or malfunction.
•Securely and fully insert the power adapter
If the plug is not inserted fully, it may cause electric shock or re due to accumulated
dust.
•If any abnormality occurs during charging, immediately disconnect the power
adapter from the outlet
This may cause overheating, re, rupture or malfunction.
Precautions for controller, power adapter and charging cable
Precautions for remote control
• Do not use and store in locations of high temperature
This may cause accidents, injury or malfunction.
• Do not step on, drop or apply strong shock to the device
This may deform , liquid leak, overheating, re, rupture or malfunction.
•Insert the "+" and "-" poles of the battery correctly
This may cause rupture, damage, malfunction or injury due to the overheating or
leakage.
•Use specified battery
This may cause rupture, damage, malfunction or injury due to the overheating or
leakage.
• Do not use a battery that has exceeded the recommended usage period
It may cause injury or malfunction.

3
Remote Control
Conductive part (antibacterial spec)
LED
Poewr OFF
Button
Mode Button
Battery
lid
Charging
Terminal
Insulation
Sheet
4
6
❷Charging (Charge before use )
❶Remove insulation sheet Pull out the insulation sheet of the
remote control.
・Connect the device and the
power adapter with the cable.
※Be careful
of the
insertion
direction.
Remote Control
Controller
・When the power adapter is
plugged into a power outlet,
the LED will light up and charging
will begin.
・When charging is complete,
the power button will stop
ashing and remain lit.
Remove the power adapter
and charging cable.
5．This remote control has been certied as a specied low power device based on the Radio Law. Therefore,
no license is required to use it. However, it is prohibited to disassemble or modify the product or remove the
certication label.
6．Do not use in places where use of mobile phones or wireless devices is prohibited such as in hospitals or
priority seats in trains.
Name of each parts
Usage
Main Unit Controller
Power Button
Intensity
Selection Button
Intensity
Selection Button
Snap (Stud) Snap
(Stocket)
210
-
143756

❸Attach to the main unit
Pay attention to the positions of the snap stud
and socket, and attach the controller rmly to
the main unit until you hear a click.
Place the product on the oor and
put your feet on the main unit while seated.
7
❹Put your feet on the main unit
※If you use the product
while standing, you may
lose balance due to the
intensity of electrical
stimulation, and you may
fall and get injured.
※Cannot be used with socks
or stockings. Please use the
product with barefoot.
※Wipe o sweat and dirt
before use.
❺
Beep
※If your body is not in close contact with the conductive parts, a beeping
sound will continue and the power button will blink (approx. 1 minute). If
there is no close contact with the body within this 1 minute, the power will
be turned o automatically.
※The power of the controller cannot be turned on by operating the remote
control.
When Using
Precautions for charging the controller
※The remote control battery cannot be charged.
※
Training Mode
Turn on the power
•Charging time is approximately 2.5 hours (charging time varies depending on the remaining battery capacity
and the c harging environment).
•The buttons cannot be operated while charging.
•Please use only the supplied charging adapter and charging cable.
•Charge in an ambient temperature between 10 ~ 35˚C.
•The number of times that can be used per charge varies depending on the intensity setting level, usage
environment and usage conditions.
•When storing, please charge once every 3 months. Otherwise, the battery may deteriorate and cannot be
used.
Number of Training Intensity 15 Approx. 20 times
Press and hold the power button (approx. 2 second) A beep will sound and
power button will light.
When the device turns on, the intensity is preset to level 1 (minimum).

8
❻Switch modes
※Please use the remote control for the following procedures.
By pressing the mode button on the remote control, a sound is emitted from the controller and the mode will
be switched. When the power is turned on, the mode is set to training.
※When you switch the mode, intensity starts from 1 (minimum ).
＊The sound of the controller and mode switching
Beep
Beep
Beep
Beep
Beep
Beep
Beep
Beep
Beep
Beep
※When the power is turned on, intensity level is 1 (minimum).
❼Adjusting intensity
●You can also use the controller to switch modes and adjust the intensity.
<Switch modes with the controller>
・Pressing the power button (short press) while the power button is lit will cause the controller to make a sound
and switch the mode. When the power is turned on, the mode is set to training.
※When the power is turned on, intensity level is 1 (minimum).
※The intensity selection buttons of the controller is an electrostatic type, so it may not work in the following
cases.
・Pressing with your nails ・Wearing adhersive plaster ・Operating with dry ngers
・A sticker on the controller ・Controller is dirty
<Adjust intensity with the controller>
・While the power button is lit, press the controller intensity selection buttons “+” and “-” to adjust. There
are 15 levels of electrical stimulation.
・When you operate the "+" or "-" button, it makes a beeping sound.
・When the intensity reaches 15 (maximum) or 1 (minimum), it makes beeping sounds.
・Adjust by pressing the intensity selection buttons "+" and "-" on the remote control.
There are 15 levels of electrical stimulation.
・When you operate the "+" or "-" button, it makes a beeping sound.
・When the intensity reaches 15 (maximum) or 1 (minimum), it gives a beeping sounds.
Soles Relaxation
Mode Calf Relaxation Mode
Training Steps Stimulation
Frequency
Type
Intensity
Level
Selection
Training Time
Training mode
Variety of stimuli can eectively train the
wide range muscles of the legs and hips Steps
20 Level
Level
Level
Level
1525
Relaxation Mode
It provide a mild and comfortable
stimulus to the feet
Steps
14 1517
Sole Relaxation Mode
It provide a comfortable tapping feeling
to the feet
Steps
3153
Calf Relaxation Mode
It provide a comfortable massaging
eects to the calf
Steps
3153
Types
Types
Types
Types
10
approx. mins
10
approx. mins
10
approx. mins
10
approx. mins
Training
Mode
Relaxation
Mode
Mode and Features

9
❾Training finishes
※The power will automatically turn o in approx.10 minutes in any of the modes.
・To turn o the power during use, press and hold the power OFF button of the remote control to OFF
(approx. 2 seconds). Alternatively, press and hold the power button on the controller (approx. 2 seconds).
As it makes the beeping sounds, the light of the power button will be turned o and the power will be
turned o.
❽Usage example
・ The following usage is recommended. (Be sure to use while sitting or lying down)
※If you use the product while standing, you may lose balance due to the intensity of electrical stimulation,
and you may fall and get injured.
※If your body is not in close contact with the conductive parts, a beeping sound will continue, and the power
button will blink (approx. 1 minute). If there is no close contact with the body within this 1 minute, the
power will be turned o automatically.
※Wipe o sweat and dirt before use.
*Recommended usage as
shown in the relevant
gures are indicative
images only. The product
cannot be used over
clothing. Please use the
product by touching the
skin directly.
Vertical Use Horizontal Use
Recommended Usage
Objective
Recommended
Modes
Recommended Usage
Objective
Recommended
Modes
Training
Training Training
Relaxation
Sole Relaxation
Relaxation
Calf Relaxation
Stimulation to the entire lower leg
Training soles, calves and anterior
shin muscles
Stimulation to the soles of the feet
Caring for your feet while relaxing
Train thigh muscles with
low-frequency stimulation
Stimulate and train the
gluteus maximus muscles
Stimulate your calves
while relaxing
Using for Calves
• After starting the operation, approx.10 mins, it will have beep sound and then automatically turn OFF.
For Thighs For Hip

When not in use for a long period of time, charge the controller and remove the battery from the
remote control for storage.
Make sure that the power is not turned on, and store it away from high temperatures, high humidity,
direct sunlight and dusty places.
Please charge the battery once every 3 months. Otherwise the battery may deteriorate and cannot be
used.
Storage Method
After use, wipe o sweat and moisture, remove the controller from the main unit. Fold the main unit,
and store it in the storage pouch with controller, remote control, charging cable and
power adapter. If you leave the product without wiping o sweat and moisture, the product life may be
shortened.
If you feel pain during eletrical stimulation
Do not use the product in the following ways.
The left and right non-woven fabrics
are in contact
Using with one piece of
non-woven fabric
Using non-woven fabrics in
layers. Using dry non-woven
fabric
10
※The controller and the main unit are not waterproof. Please do not allow the
controller or the main unit to get wet.
※Please do not use wet tissues with chemicals (for face cleansing, makeup
removing, etc).
※When you placing the non-woven fabric, please do not let it touch the
controller or the snaps.
•
•
Even after changing position of your feet or the sitting position or using a non-woven fabric, you still feel strong
electrical stimulation, stop using this product immediately.
•
•
•
•
Wet 2 pieces of non-woven fabric or thin cloths with water, wring them well,
place a piece on each conductive part of both sides of the main unit.
• If you feel pain or numbness during use, switch o the device, change the position of your feet or sitting
position, and then try again.
• Do not forcibly increase the intensity.
• In the beginning, please start the training from low intensity level (level 1, etc.), and gradually increase
the intensity after getting used to electrical stimulation.
• Traning steps will be switched automatically and does not support manual operation.
• When the device is stopped during the training, next training will start from the beginning.
• Use within 10-35°C.
• If the power button does not light on or the electrical stimulus cannot be felt, the battery may be
exhausted. Please charge the controller.
• Be sure to disconnect the charging cable before use.
Caution

11
If the LED on the remote control does not light, or if the remote control does not respond when
you point it at the controller, the battery may be exhausted. Replace with new batteries.
※The included battery is for trial use. The battery
life may be short.
※The remote control battery cannot be charged.
❷Take out the battery
❶Open the battery lid
❹Close the battery lid
❸Insert a battery
5
Open
Open
Caution
Battery Used Button type lithium battery CR2032
Maintenance
Never carry out maintenance during charging and ensure power supply is o.
Be sure to power o and remove the controller from the main unit.
•This product is not waterproof. Please do not splash water on the main unit, controller and
remote control.
•Do not wipe with chemicals such as benzine, thinner or alcohol.
•If the product is used without being cleaned or stored for a long period of time, it may cause
performance deterioration and malfunction. Regular maintenance is recommended.
Caution
Maintenance of main unit, controller and remote control
Replace Battery of the remote control
•Please use dry and soft cloth to wipe away the dirt on the device.
•For severe dirt, please use damp soft cloth to wipe away the dirt on the device gently. Please
squeeze out water from wet cloth before wiping.
Put your nger in the recess, press from the bottom,
and take out the battery.
Push in
Use a coin etc. to open the battery lid.
※Be careful not to lose the battery lid.
Insert the battery with the "+" mark facing up.
※Make sure that the battery is installed securely.
（Recommendation:Maxell Manufacture ）
press from the
bottom, and take
out the battery.
Close
Close
• Be sure to replace the battery with a new.
• For the removed battery, cover the "+" and "-" poles with adhesive tape to insulate it, then dispose it
according to the disposal rule of the district where you live (city).
• Do not insert the battery with the "+" and "-" poles in the incorrect orientation.
This may cause rupture, damage, malfunction or injury due to the overheating or leakage.
• If a battery or battery lid is swallowed, contact a doctor immediately for instructions.
※Make sure that the battery lid is tightly
closed. If the battery cover is not closed
securely, remote control may not operation.
Use a coin etc. to close the battery lid.

12
6Troubleshooting
The time to press and hold the power
button is not long enough
When the power button is pressed for approx.
2 seconds, a beep sounds and the power turns
on
Used continuously For the same part of body, use once a day
This device will stop after a mode approx.
10 mins
Power turns o automatically after
certain time
Cannot feel the
training
Electrical stimulation is
weak, and does not
increase
Cannot power on
( controller )
Beeping does not stop
(controller )
Device cannot
operate (controller,
main unit)
Remote control
cannot operate
LED does not light
(Remote control)
Unable to charge
(Controller)
The controller and the main unit are
not connected
Physical predisposition that makes
you feel sensitive to electrical
stimulation
Remote control battery is exhausted
Remote control battery is exhausted
Remote control battery is exhausted
Replace the remote control’s battery with a
new battery
Please securely attach the controller to the
main unit
Replace the remote control’s battery with a
new battery
Press "+" on the intensity selection button to
increase the intensity
Press "-" on the intensity selection button to
decrease the intesity
Not in close contact with the body Please adjust the position where you put your
feet or sitting position
Not in close contact with the body Please adjust the position where you put your
feet or where sitting position
Not in close contact with the body Please adjust the position where you put your
feet or sitting position
Radio waves from the remote
control do not reach the controller
The charging cable is not inserted
properly
Aim the remote control at the controller and
operate. Please operate the remote control
closer to the controller
Try to turn ON the power with
the remote control
The power cannot be turned on with the
remote controll. Press and hold the power
button on the controller (approx. 2 seconds)
Trying to turn on the power with the
remote control
The power cannot be turned on with the
remote control. Press and hold the power
button on the controller (approx. 2 seconds)
It is in a dierent mode Select the mode referring to P.9 "❽
Example of use"
Replace the remote controll’s battery with a
new battery
Sensation is too
strong or feels
painful
Controller battery level is low
Controller battery is exhausted
Controller Battery level is low
Controller battery level is exhausted
Charge the controller
Charge the controller
Charge the controller
Charge the Controller
Extremely dry skin Use water to moisten your skin and try again
Extremely dry skin Use water to moisten your skin and try again
Intensity setting is high
Intensity setting is low
Problem Cause Solution
Please refer to P.10 “If you feel pain during
electrical stimulation”, wet 2 pieces of non-
woven fabric or thin cloths with water, wring
them well, place a piece on each conductive
part of both sides of the main unit
Securely insert the power adapter to the end

Please dispose it according to the disposal rule of the district of where you live (city).
8
7
13
Controller
Device
Regarding controller
Regarding remote control
Regarding main unit, power adapter, charging cable
(included controller）
W35×H20cm
W37×H70×D11mm（excluding protrusions）
Approx. 14 g (without battery）
Remote
Control
Each mode approx. 10mins
Coin Type Battery Installed on the remote control
W360 × H340 × D22mm（excluding protrusions）
Approx. 150g
Approx. 3m(sight distance)
315 MHz
Approx. 50cm
AC 100-240V 50 / 60Hz
DC5V / 1A Max.
Operation Time
Device disposal
Specification
Transmission Frequency
Transmission Distance
Antibacterial effect
Part name : Main unit The part performed
antibacterial treatment
Based on
JIS Z 2801-2012 Antibacterial method :
Testing organization : Guangzhou Microbiology Research Institute (China)
When disposal, be sure to remove the battery (coin type lithium battery) from the remote control, cover the
"+" and "-" poles with adhesive tape to insulate it, then dispose it according to the disposal rule of the district
where you live (city).
The controller of this product is equipped with a lithium-ion battery (rechargeable battery).
Rechargeable batteries can be recycled. Please do not remove this rechargeable battery by yourself,
please contact our “Customer Support Center”. For the collection/recycling of rechargeable batteries
and cooperating organization of recycling, please refer to the JBRC website.
Caution : Regarding disposal of rechargeable batteries in Japan
Accessories
Storage Pouch
(CR2032)
Trial Battery
Dimension
Weight
Battery
Dimension
Dimension
Weight
Battery
Input
Output
Length
Power Adapter
Charging Cable
Lithium ion battery 3.7V 120mAh
Coin type battery ( CR2032 )
: Conductive part
Kneaded into conductive
silicone rubber
Test method :

14
Maxell,Ltd.
30-13 Motoyoyogi-Cho, Shibuya-Ku, Tokyo 151-8527