maxfun 10 Pro User manual

User Manual

Using This Manual
This manual contains detailed information about the product and its equipment, as well as information
on operation, maintenance and other tips useful to all users. Please read carefully and be familiar with
the electric scooter before use to ensure safe use and prevent accidents.
This manual contains many warnings and precautions for safe operation and the consequences of
problems that may occur if proper setup, operation and maintenance are not performed. Please read
all the information in this manual carefully, and if you have any questions, please contact Maxfun
immediately. This manual and any other documents accompanying the electric scooter should be kept
in a safe place for future reference, but all contents of this manual are subject to change without noti-
ce.
NOTE: This manual is not intended to be an exhaustive reference for service, maintenance and/or
repair. Consult for service and technical support, you can find out more about our products or find
dealers through www.maxfunscooter.com. If you lack assembly experience, we recommend that you
seek assembly services from your local electric scooter shop or dealer. Proper assembly and safe
riding are essential.
!

Content
Safety Warnings ································································································································································
Scooter Overview ······························································································································································
Product Specification ·····················································································································································
Assembly ··············································································································································································
General Operation ····························································································································································
Dashboard ···········································································································································································
Function Description ·······················································································································································
Battery Overview ·······························································································································································
Warranty Guarantee ·························································································································································
Customer Support ·····························································································································································
Maintenance and FAQ ······················································································································································
01
03
04
06
08
09
10
14
15
17
18

Safety Instructions
Safety Guidelines and Restrictions
*Even if that is within the warranty period, you may be liable for any accident caused by any of the following causes.
!
1 3 4
Do not ride your scooter
in the heavy rain or wet
environment, otherwise the
battery may be damaged.
It is forbidden to jump,
fall and other stunt
jumps, which will have a great
impact on the product and
easily cause malfunctions and
accidents.
21 Please be careful with
it. Serious injury may
result if body parts such as
fingers or hair are caught in
rotating or folding parts of the
product.
Do not brake suddenly
while driving. This could
cause it to fall over.
3 4
XXX
Do Not Brake Suddenly
2
!
Caution


X
6
Safety Instructions
Safety Guidelines and Restrictions
*Even if that is within the warranty period, you may be liable for any accident caused by any of the following causes.
5 7 8
Do not open or tune
the electric parts (bat-
tery, controller or motor
system).
This product is intended
for one adult only, so
children, infants, or two
people are prohibited from
boarding.
65 Slow down at downhill.
When reducing the
speed, to prevent brake over-
heat, use the brakes properly
to reduce the heat on the disk
with proper brake use.
Mountain roads with
slopes exceeding the
specifications may cause the
product to malfunction.
7 8
!
Caution
XXX


Scooter Overview
--------------------------------
---
------------------------------------------------------------------------
-------------------------------------------------------------------
LCD Display
-------------------------------------------------------------------- Folding Mechanism
------------------------ Rear Fender
---------------------------
-----------------------------------------
Rear Wheel
Brake
------------------------------
Headlight
-------------------------------------- Rear Shock
---------------------------------------- Taillight
---------------------------- Rear Swing Arm
---------------------------- Rear Disc Brake
---------------------
Front Hub Motor
-------------------------
Front Wheel
Front Swing Arm
--------------------------- Front Fender
----------------------------------------------------------
Kickstand Rear Turn Signal
---------------------
Quick Release Lever
----------------------------
Handlebar
----------------------------------
Steering Bar
Accelerate
---------------------------------
Front Turn Signal
----------
---------------------------
-----
Footboard
---------------------------------------------------------
------
--------
Girder
--------------------------------------------------------------------------
------
-------------------------
Front Shock Absorber
Left Charging Port Right charging port


Standing height
41.5”
Deck Length
23.2”
Deck Width
10.1”
Handlebar Length
25.5”
Head Angle
79°
Product Size
Overall Height
51.7”
Folded Height
22.2”
Overall Length
51.9”
Wheel Base
42”


Specification
BATTERY
MOTOR
MAX SPEED
MAX RANGE
N.W/G.W
LOAD CAPACITY
BRAKES
SUSPENSION
GEAR
FOLDABLE
CHARGING TIME
MATERIAL
PNEUMATIC TIRE
SCOOTER SIZE(CM)
FOLD SIZE(CM)
WATERPROOF RATING
72V 24AH
Front 1500W + Rear 1500W
45 MPH
39.5 KGS / 46.5 KGS
150KG
Dual Hydraulic Brake
Front and Rear
3
Yes
12h (single charger)
Aluminum Alloy
10 Inches
132*70*128
132*70*56
IP54

(depends on riding condition)
60 Miles

Assembly Process
Unfolding
The first step is to unfold your electric
scooter. To do this, make sure the
hooks are not caught on the rear foot-
board. If it is, push the rod down and
remove it from the rear footboard.
1
43 4
21
Unfold the steering bar by pulling it to
a vertical position. Ensure you do so
until the Steering Bar is completely verti-
cal.
2
Make sure the steering bar is secured
by turning the safety lock to the right
until it is tight.
3
Lastly, make sure the safety button of
the folding mechanism is clipped to
the steering bar. This safety mechanism
prevents the latch from unlocking due to
vibration or shock.
4


Install handlebars

The first step is to remove 4 screws
in order to install the handlebar of
the electric scooter.
1
43 4
Put on the handle of the electric
scooter, then align the mounting
module with the four screw holes, and
press the module.
2
Press and hold the installation
module, and screw the four screw
holes to the right respectively, don't tight-
en it, just hang it.
3
Finally, tighten the screws on the four
screw holes to the right to ensure that
the handle is installed securely.
4
21

General Operation
Power Switch
*Do not hang the Maxfun card close to the NFC recognition area during the riding.
1Place Maxfun card at the designated location
on the dashboard and the scooter will be
successfully unlocked.
2Press and hold the power button for 3 sec-
onds to turn on the LCD display. You will then
see the meter turn on on the screen.

2
1

Speed Indicator: AVG SPEED, MAX SPEED, RT SPEED
Speed Mode: It is displayed as Km/h or MPH
Battery Indicator: It provides stable battery remind-
ers through an optimization algorithm. Power is unaf-
fected by motor start and stop fluctuations. If the
system supports battery communication, it can
display accurate battery percentage.
Brake Indicator: When brake, the icon shows up
on the screen.
Assist Level: When the power is on, it will show PAS 1,
the top speed is 15 MPH; Press the" +" button, it will
show PAS 2, the top speed is 25 MPH; Press the " + "
button again, it will show PAS 3, the top speed is 45
MPH.
When an error is detected, an icon will be displayed
on the screen.
Mileage Mode: “TRIP” , “ODO” , “POW” , “TIME” .
Mileage Display: Displays mileage information or
time information.
Error Code: 0x08: Over temperature protection, 0x30:
Communication failure, 0x06: Controller failure, 0x05:
Undervoltage protection, 0x04: Handlebar failure,
0x02: Hall failure, 0x01: Motor phase loss
Dashboard
---
-----------------------------------
-----
---------------------------------------
Error
Battery Indicator
Speed Indicator
PAS
Mileage Mode
---------------------
-------------------------
Speed Mode
----------------------------
Brake Indicatorr
---------- Turn Signal Indicator
--------------
Power Progress Bar
--------------------
------------------------------------------------
----------------------
Mileage Display
----------------------
Motor Mode


Function Description
Button description as follows:
Power Button
Plus Button
-----------------------------------
Minus Button
---------------------------------
---------------------------------
M Button
---------------------------------------
Press and hold POWER button to turn on or turn off the display. The display will automatically shut down when there is no
operation& ride for 5 minutes(X could be 0~9).
In the manual shift mode, short press +or -button to switch the assist level and change the assist ratio. The top assist level is
3. The default value is 1st when the display is turned on, and 1 is the neutral assist.

*Turn on the default dual-drive mode, the instrument displays PAS 1, press and hold the "+" button for 3 sec-
onds to switch between single-drive mode or dual-drive mode.

*If there is no key operation for 5 seconds, the system will automatically return to the real-time speed display state.
*These temporary data will not be erased when the display or the scooter is powered off.
When powered on, short-press POWER to switch the mileage display mode. And the following information is displayed cycli-
cally: riding time (Time) → accumulated mileage (ODO) → power information (Pow) → single mileage (Trip).
Press the M button to switch the speed display mode, and the following information is displayed cyclically: real-time speed
(RT SPEED) → average speed (AVG SPEED) → maximum speed (MAX SPEED).
Press the M button twice within 0.3S, it will enter the menu. Press the M button twice again to exit (the time interval must be
within 0.3S).
In the power-on state, the USB charger is turned on by default. Charging parameters: DC 5V 500mA.
To zero the data out, including AVG Speed, MAX Speed, Trip, and Time, hold the PLUS and MINUS buttons for a few seconds.


P-Setting Instruction
Accessing Settings
Press the M button twice within 0.3S, it will enter the menu. Press M button twice again to exit .
*In the parameter setting state, if no key operation is performed for 30 seconds, the system will automatically exit. In the riding
state (the speed indication is not 0), it cannot enter the setting interface. If you start cycling in the setting interface (the speed
indicator is not 0), it will automatically exit the setting.
Press the M button to select the desired adjustment item, and the item starts flashing. Click the plus button and minus button
to adjust the parameters, press the M button once to save the setting, double click M to exit the menu.
P1: Backlight Brightness: Press +or - button to select brightness levels. It has five options from 1 to 5.
P2: Auto power off time: Press +or -button to adjust auto off time.1 ~ 10 minutes represents the automatic shutdown time. Or
you can click OFF to cancel the auto off function.
P3: Universal / Imperial: Press +or -button to switch km / h or MPH. 0 stands for universal system and 1 stands for imperial
system.
P4: In P4 state, press and hold the plus/minus keys at the same time to enter the E-level parameter setting.


E-Setting Instruction
Restore Factory Settings: Press the mode key to
enter the FRc setting interface, select RES to restore
factory settings. After setting, other parameters
except the total mileage will be restored to factory
settings; double-click the mode key to return to the
main menu.
E1: Rear motor starting strength: Press the plus/minus key to select the gear and display 1~5, 1 is the weakest and 5 is the stron-
gest. The default settings are 2 for 1st gear, 3 for 2nd gear, and 5 for 3rd gear.
E2: Front motor starting strength: Press the plus/minus key to select the gear and display 1~5, 1 is the weakest and 5 is the
strongest. The default settings are 2 for 1st gear, 3 for 2nd gear, and 5 for 3rd gear.
E3: EABS startup intensity: Press the plus/minus key to select the range from 1 to 5, with 1 being the weakest and 5 being the
strongest. The default settings are 1 for 1st gear, 3 for 2nd gear, and 5 for 3rd gear.
E5: Front motor current limit: Press the plus/minus key to adjust the current limit value, ranging from 1-120. The default
settings are 10 for 1st gear, 20 for 2nd gear, and 30 for 3rd gear.
E6: Gear speed limit: Press the plus/minus key to adjust the speed limit percentage, ranging from 1-100. The default settings
are 33 for 1st gear, 66 for 2nd gear, and 100 for 3rd gear.
E4: Rear motor current limit: Press the plus/minus key to adjust the current limit value, ranging from 1-120. The default settings
are 10 for 1st gear, 20 for 2nd gear, and 30 for 3rd gear.
In P4 state, press and hold the plus/minus keys at the same time to enter each parameter setting as shown below, which is
divided into 6 setting items E1-E6. In the setting state, press the mode key to select the required adjustment item. The parame-
ter to be set flashes. Press the plus/minus key to adjust the parameter setting. Press the mode key to save and switch. Press the
mode key twice in succession to exit the setting state (press twice interval <0.3 seconds).


Battery Overview
Battery Capacity：
The charger getting warm during use is normal. If your charger doesn’ t get warm during use, it does not mean that it’ s not
working properly. In the event of a short circuit, your battery will automatically stop output to protect itself.
Do not charge the scooter immediately after a long-distance ride. Please wait at least 30 minutes. Plug the charger into an
AC outlet first, then connect the other end to your scooter's charging port.
As a safety recommendation, do not leave the scooter charging for more than 12 hours.
Ensure the room temperature is between 15 and 30℃for ultimate.
Battery Charger Plug
72V 24AH


Warranty Guarantee
Your purchase includes the following warranty.
The warranty would be registered automatically when the initial purchaser ordered it in the online shop. The warranty is ONLY
under the INITIAL PURCHASER. The warranty would be started when the initial owner receives it.

12 months
24 months
6 months
3 months
1 Month or 100KM
Battery、Front and Rear Motors、
Wiring Harness、Disc Brake Base、
Controller、Dashboard Screen Assembly
Turn Signal Switch、Headlight Switch、
Charging Port、Light Cover、
Brake Disc、Front and Rear Fenders
Brake Pads、Kickstand、Inner Tube
Aesthetic Damage Not Covered
Frame Assembly、
Front and Rear Shock Absorbers
Taillight、Front and Rear Lights、
Headlight、Turn Signal、
Charger、Horn button、
Left and Right Brake Lever
Free maintenance
Free maintenance
Free maintenance
Free maintenance
Free maintenance

Limited Warranty Exclusions
This Limited Warranty describes the service available to you in the event your product requires warranty service and you may
have additional protections under your local laws. This Limited Warranty does not cover and excludes damage to your product
or any component thereof caused by:
In no event Maxfun parties’ total and aggregate liability for all claims under any and all applicable law or theory, jointly or sever-
ally, arising out of or related to the purchase of the product, breach of contract, tort (including negligence) or otherwise exceeds
the duty to repair or replace any defective product, further subject to Maxfun’ s sole and exclusive discretion. In no event shall
be Maxfun parties be liable to any person for consequential, indirect, incidental, special, exemplary, punitive or enhanced dam-
aged arising out of, or relating to, and/or in connection with the purchase of the product.
1. Abuse, misuse, recklessness, negligence, or commercial use.
2. Improper charging, storage, maintenance, or operation of the product not in compliance with instructions or limitations as
provided in the user materials.
3. Use of the product not in compliance with applicable laws and regulations.
4. Use of the product by persons with inadequate experience.
5. Accident, collision, riding at unsafe speed on paved roads, riding at unsafe speed on unpaved roads, riding over obstacles,
amateur racing, professional racing, use in backcountry sports, fire damage, water damage, chemical damage, use of the
product outside of the product’ s working temperature range, high-pressure water spray, earthquake, dropping, loading
with excessive weights.
6. Modifications to mechanical parts, modification of electronic parts, or modifications to software embedded in the product.
7. Service, repair, and maintenance by unauthorized providers.
8. Cosmetic damages.
9. Use of the product with third party product, component, or accessory.
10. Use of the product with overdue wear and tear parts.
11. Man-made damage due to personal reasons.


Notice to Customers
Scooters manufactured by Maxfun are pre-assembled, though some of the parts may require assembly by our customers. To
help ensure the safety of your scooter and driving, please check and test everything before using your scooter. If your inspec-
tion finds an issue with the scooter, please contact your seller. You can also contact your seller if you need assistance with any
of the assembly.
To avoid damage during transport, we have safely packed all of the electric scooter components in foam and cardboard. If
something is damaged upon arrival, please take photos or videos of the damaged parts. And promptly contact the seller, who
will provide you with a solution.
If your scooter is damaged due to an accident or misuse, you can buy replacement parts at maxfunscooter.com, the distribu-
tor or seller you made your purchase from, or you can send the scooter to be repaired. The buyer bears all repair costs. If there
are other after-sale problems or questions, please send an e-mail to us at [e-mail]

*In order to improve user experience and improve service content, the company has the right to update the software at any
time or change or limit some functions and effects of the software.