Rapier
Work Positioning Lanyard
Product #B30 2m
Product # B30 3m
IMPORTANT:
In order to ensure optimum safety and performance please study and
understand these instructions before using the product.
Keep this manual for your records.
MaxGear Inc.
820 Gartshore St., Unit 9
PO Box 418
Fergus ON,
N1M 3E2 CANADA
Tel: + 1 519 787 1581
Fax: + 1 519 787 3746
www.MaxGear.ca
Warning
Working at height and all forms of activity conducted at height are dangerous
and can lead to serious injury or death.
This product is to be used only by a competent and responsible person or by
those under the direction of a competent and responsible person.
Improper use of equipment can result in serious injury or death. It is the re-
sponsibility of the user to obtain proper training in rope techniques and safety
prior to any activity at height and use of such equipment.
This manual is not a do-it-yourself manual, and the information presented can-
not replace proper training and experience. It is a person's obligation to get
adequate training in appropriate techniques
and safety practises.
We have done everything possible to
ensure that the information provided in
this manual is accurate at the time of
publication.
However, we do not guarantee that
this information will remain up to date,
as many products and techniques
change over time.
If you have doubts or difficulty
understanding anything in this
manual, please contact us.
Inspection
Before each use visually inspect to ensure the product is in serviceable condition and
operates correctly. An examination should be carried out at least every 12 months by
a competent person. These inspections should be recorded. Pay particular attention
to areas of potentially high wear.
See our info page on PPE Inspection.
Cleaning / Maintenance
Products should be washed in clean water and then left to air dry. The product can
not make contact with corrosive chemicals and must not be stored in extreme tem-
peratures. The product should be disposed of it any of these this things occur:
Does not meet inspection standards
Has been involved in a significant fall or load
You do not know the history of the product you are using
If any of these things occur then dispose of
the product to prevent further use.
Storage
After cleaning, store in a cool,
dry, and dark place away from excessive
temperatures or other possible causes of
damage.
If there is any doubt in your mind
concerning the use of this product,
do not use it!
Rapier Work Positioning Lanyard
Has been created using a Low Stretch Kernmantle
rope with a stitched end-termination to make it ex-
ceptional strong.
The snap hook can be positioned on the D-rings on
one side while the rope grab can go to the other D-
ring using a compatible carabiner (MaxGear Canadi-
an D). The rope can go around the structure of
choice to positioning oneself.
Use only as instructed, with compatible items of
equipment. Misuse can cause problems, weakness,
serious injury or death. Neatness is strength.
Always keep an eye out for potential falls
Limitations and proper use All components are
designed and tested to specific load designations. Be
aware of the designed load limitations and proper
user technique. If you are not sure of proper application or user technique, seek proper
training in use in trope rescue application.
Safety
Do not alter this package in any way. Any product within the package subjected to a
minor fall should be examined and discarded if there is any sign of defect or any doubts
about safety. This product should be use between the temperatures of –30oC and
+50oC, no more or less.
