MAXHUB BM11 User manual

使用说明书（印刷时请删除此页）
尺寸 85×85mm-公差±2mm
材质 封面两页 157g 铜版纸，内页 80g 双胶纸
工艺 单黑双面印刷，封面覆哑膜
成型方式 钉装
履历页
版本 页次 更新内容 更新时间
V1.0 所有 在“(海外中性)BM11-
Speakerphone User Manual-
V1.1-20210201”基础上改为海
外MAXHUB 说明书
2021-02-01

V1.1 8,10 添加 FCC 认证信息（认证提供） 2021-02-02
V1.2 31 添加配件备注 2021-02-02

Speakerphone | User Manual
All the pictures in this manual are for reference
only, please refer to the actual product.

Contents
1. Important Information....................... 1
2. Safety Warnings and Precautions ............. 2
3. FCC Statement............................... 9
4. FCC Warning ............................... 12
5. Special statement.......................... 13
6. Product Appearance......................... 16
7. Product Usage.............................. 18
8. Common faults and troubleshooting .......... 30
9. Key Specifications......................... 34

1
1. Important Information
This manual Contains the precautions and the
product usage. Please read and understand all the
instructions before using the device. The damage
caused by failure to follow the instructions is
not covered by the warranty. Please keep this
manual properly.

2
2. Safety Warnings and Precautions
2.1. Be careful of electric shock or fire!
2.1.1. This device is not waterproof, please
keep it dry; if water is immersed in this
product, please shut down immediately and
contact the customer service centre
according to the prompt provided by the
customer service centre before using it
again.
2.1.2. Never place this device and
accessories near the burning flames or

3
other heat sources, Including direct
sunlight.
2.1.3. This device should be turned off and
unplugged before lightning storms.
2.2. Be careful of short circuit or catching
fire!
2.2.1. Before connecting this device to an
electrical outlet, please make sure that
the power supply voltage matches the
voltage value printed on the back or bottom
of the product. Never connect the product

4
to an electrical outlet when the voltage is
different.
2.3. Be careful of injury or harm this
speaker!
2.3.1. Never place this device or any
objects on a power cord or other electronic
devices.
2.3.2. If this product is transported at a
temperature below 5℃, please unpack the
product and wait until the temperature
reaches room temperature before connecting

5
it to a power outlet.
2.3.3. This product comes with sharp
objects, please handle it carefully so as
to avoid injury to the user or scratching
the appearance of the product or damaging
the internal parts of the product!
2.4. Be careful overheat!
2.4.1. Never install this device in an
enclosed space. Always leave at least 4
inches space around the product for
ventilation.

6
2.5. Children's health
2.5.1. This device and accessories may
contain some small parts, please keep them
out of the reach of children to avoid
danger.
2.6. Care for the environment!
2.6.1. This device applies recyclable high-
performance materials and components.
2.6.2. Never dispose of this product with
other household wastes. Please understand
the local regulations on the sorting

7
collection of electronic, electrical
products and batteries.
2.6.3. Proper disposal of these products
helps to avoid potential negative effects
on the environment and human body health.
2.7. Care for the product!
2.7.1. Clean this device only with a piece
of microfiber cleaning cloth.
2.8. Maintenance & servicing
2.8.1. Please contact professional service
personnel for all repair services;

8
2.8.2. Please do not insert any sharp object
into the inside of the device;
2.8.3. Please do not drop or hit the device
to avoid damaging it.

9
3. FCC Statement
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.

1
However, there is no guarantee that interference
will not occur in a particular installation. If
this equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment
and receiver.

1
—Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
—Consult the dealer or an experienced radio/TV
technician for help.
Caution: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to
operate this equipment.

1
4. FCC Warning
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference thatmay cause undesired operation.
Radiation Exposure Statement:
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed

1
and operated with minimum distance 20cm between
the radiator & your body.
5. Special statement
5.1. Intellectual property statement: the
hardware design and software programs of
this product are copyright protected.
Anyone copying the contents of this product
and instructions without the authorization
of this company will bear the corresponding
legal responsibilities.
5.2. This manual is for reference only. The

1
actual final functions are subject to the
actual ordering of the customer and the
actual functions of the product received.
5.3. The pictures are for reference only, please
refer to the actual product. The company
reserves the right to make improvements on
and changes to the product appearance and
design without prior notice.
Bluetooth words and trademarks are owned by

1
Bluetooth SIG, Inc.

1
6. Product Appearance