Maxmeen MG-D108 User manual
Conference System
User Manual
MG-D108
MG-D 108
MG-D108
MG-D108
Dear users:
Thank you for using MAXMEEN products, please read this manual before
using to make sure the correct operation and exert the best performance.
Features
• Supports 10 balanced or unbalanced microphone signal input.
• Independent microphone output volume control.
• Stereo line input for connecting the background sound source device.
• 48V phantom power supply meets the power supply demand of condenser
microphone.
• With microphone ECHO effect adjustment function.
• Built-in digital frequency shift circuit features strong anti-howling ability.
• 2 microphone EQ adjustment for better sound effect of different microphone.
Function Button Instruction
Front Pannel
Rear Pannel
Specification
• Input Voltage: AC 18V
• Output Voltage: 48V phantom power
• Output Current: 6.5mA
• Microphone connection match: phantom or non-phantom power supply
(Please turn the phantom power off if have no need with)
• Microphone connection mode: ten 6.35 socket, ten female cannon socket
• Weight: 2.5KGS
• Dimension: 485*206.5*61mm
• Power Consumption: <7.5W
• Output Impedance: 600Ω
• S/N Ratio: ≧R64dB
• Frequency Response: 30Hz-20kHz
Product Content
MG-D108 conference system 1pc
Adaptor 1pc
User manual 1pc
Certification 1pc
Waranty card 1pc
MIC 1 MIC 2 MIC 3 MIC 4 MIC 5 MIC 6 MIC 7 MIC 8 MIC 9 MIC 10 BASS TREBLE
AUX IN 48V POWERVOLUMEECHO
MG- D108
IN
OUT
LIN EMIC 1MIC 2
MIC 3
MIC 4MI C 5MIC 6MI C 7MIC 8M IC 9MIC 1 0AC 18 V MIC O UT
Made in China
AC 1 8 V
AC 1 8 V
AC 1 8 V
Level control
Line input control
ECHO effect adjustment
Bass balanced adjustment
High pitch balanced adjustment
Output volume control
48V phantom power switch (Please turn it off if have no need with)
Power button
Adaptor interface
Microphone input interface
Microphone output interface
Line input/output interface
Connection diagram
(1) Method one
(2) Method two (Multi of series)
Usage and Maintenance
1. Please check the package to make sure the complete product content before
use. In order to install smoothly, please contact the retailer immediately if there
is any short of accessories.
2. When installation, please connect all the microphones with mixer, and then
connect the mixer and audio equipment. Test the volume with microphone,
until to reach the best sound quality.
3. Turn off the microphone when not speaking, in order to avoid howling.
4. Don't let water into the product or be affected with damp, as this may cause
malfunction.
Adaptor
Adaptor
Adaptor
1
4
3
9
10
11
12
5
8
7
6
2
MG-D108 MG-D108
Made in China
Made in China
Made in China
