Maxtor D540X-4K User manual






©November 1, 2001 Maxtor Corporation. All rights reserved. Printed in U.S.A.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made
to the information herein – which will be incorporated in revised editions of the publication. Maxtor may
make changes or improvements in the product(s) described in this publication at any time and without
notice.
UL/CSA/VDE/TUV
UL standard 1954 recognition granted under File No. E78016
CSA standard C22.2-950 certification granted under File No. LR49896
TUV Rheinland EN 60 950
Tested to FCC Rules for Radiated and Conducted Emissions, Part 15, Sub Part J, for Class-B Equipment.
PATENTS
These products are covered by or licensed under one or more of the following U.S. Patents:
4,419,701; 4, 538,193 4,625,109; 4,639,798; 4,647,769; 4,647,997; 4,661,696; 4,669,004; 4,675,652;
4,703,176; 4,730,321; 4,772,974; 4,783,705; 4,819,153; 4,882,671; 4,920,442; 4,920,434; 4,982,296;
5,005,089; 5,027,241; 5,031,061; 5,084,791; 5,119,254; 5,160,865; 5,170,229; 5,177,771; Other U.S. and
Foreign Patents Pending.
Maxtor®, MaxFax®and No Quibble Service®are registered trademarks of Maxtor Corporation, registered in
the U.S.A. and other countries. Maxtor D540X-4K, AutoTransfer, AutoRead, AutoWrite, DisCache, Dis-
kWare, Defect Free Interface, and WriteCache are trademarks of Maxtor Corporation. All other brand
names or trademarks are the property of their manufacturers.
Maxtor reserves the right to make changes and improvements to its products, without incurring any obliga-
tion to incorporate such changes or improvements into units previously sold or shipped.

This product or document is protected by copyright and distributed under licences restricting its use, copy-
ing, distributing, and decompilation. No part of this product or document may be reproduced in any form
by any means without prior written authorization of Maxtor and its licensors, if any.
RESTRICTED RIGHTS LEGEND: Use, duplication, or disclosure by the government is subject to
restrictions as set forth in subparagraphs (c)(1)(ii) of the Rights in Technical Data and Computer Software
clause at DFARS 252.227-7013 and FAR 52.227-19.
THIS PUBLICATION IS PROVIDED “AS IS”WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTIULAR PURPOSE, OR NON-INFRINGE-
MENT.
You can request Maxtor publications from your Maxtor Sales Representative or order them directly from
Maxtor.
Publication Number: 81-126201-02
Corporate Headquarters:
510 Cottonwood Drive
Milpitas, California 95035
Tel: [phone]
Fax: [phone]
Research and Development Center:
2190 Miller Drive
Longmont, Colorado 80501
Tel: [phone]
Fax: [phone]


Thank you for your interest in Maxtor hard disk drives. This manual provides technical information for
OEM engineers and systems integrators regarding the installation and use of Maxtor hard drives. Drive
repair should be performed only at an authorized repair center. For repair information, contact the Maxtor
Customer Service Center at 800-2MAXTOR or 408-922-2085.
CAUTION: Maxtor hard drives are precision products. Failure to follow these precautions and guidelines out-
lined here may lead to product failure, damage and invalidation of all warranties.
1BEFORE unpacking or handling a drive, take all proper electro-static discharge (ESD) precau-
tions, including personnel and equipment grounding. Stand-alone drives are sensitive to ESD
damage.
2BEFORE removing drives from their packing material, allow them to reach room temperature.
3 During handling, NEVER drop, jar, or bump a drive.
4 Once a drive is removed from the Maxtor shipping container, IMMEDIATELY secure the
drive through its mounting holes within a chassis. Otherwise, store the drive on a padded,
grounded, antistatic surface.
5NEVER switch DC power onto the drive by plugging an electrically live DC source cable into
the drive's connector. NEVER connect a live bus to the drive's interface connector.
6ELECTRICAL GROUNDING - For proper operation, the drive must be securely fastened to
a device bay that provides a suitable electrical ground to the drive baseplate.
Please do not remove or cover up Maxtor factory-installed drive labels. They contain information required
should the drive ever need repair.

Maxtor D540X-4K 20.4/40.0/60.0/80.0 GB AT v



1.1 AUDIENCE............................................................................................................. 1-1
1.2 MANUAL ORGANIZATION................................................................................ 1-1
1.3 TERMINOLOGY AND CONVENTIONS ........................................................... 1-1
1.4 REFERENCES........................................................................................................ 1-3


2.1 PRODUCT OVERVIEW ....................................................................................... 2-1
2.2 KEY FEATURES..................................................................................................... 2-2
2.3 Regulatory Compliance Standards............................................................................. 2-3
2.4 HARDWARE REQUIREMENTS......................................................................... 2-4


3.1 SPACE REQUIREMENTS..................................................................................... 3-1
3.2 UNPACKING INSTRUCTIONS........................................................................... 3-2
3.3 HARDWARE OPTIONS ....................................................................................... 3-4
3.3.1 Cable Select (CS) Jumper .................................................................................3-5
3.3.2 Drive Select (DS) Jumper .................................................................................3-6
3.3.3 Master Jumper configuration .............................................................................3-6
3.3.4 Jumper Parking (PK) Position ...........................................................................3-6
3.3.5 Alternate Capacity (AC) ...................................................................................3-7
3.4 ATA BUS ADAPTER.............................................................................................. 3-8
3.4.1 40-Pin ATA Bus Connector .............................................................................3-8
3.4.2 Adapter Board ..................................................................................................3-8
3.5 MOUNTING THE DRIVE ON PERSONAL COMPUTERS.............................. 3-9
3.5.1 Orientation .......................................................................................................3-9
3.5.2 Clearance .......................................................................................................3-11
3.5.3 Ventilation .....................................................................................................3-11
3.6 COMBINATION CONNECTOR (J1)................................................................. 3-11
3.6.1 DC Power (J1, Section A) ..............................................................................3-12
3.6.2 External Drive Activity LED ..........................................................................3-12
3.6.3 ATA Bus Interface Connector (J1, Section C) ................................................3-12
3.7 FOR SYSTEMS WITH A MOTHERBOARD ATA ADAPTER ........................ 3-13
3.8 FOR SYSTEMS WITH AN ATA ADAPTER BOARD....................................... 3-13
3.8.1 Adapter Board Installation ............................................................................... 3-13

Table of Contents
vi Maxtor D540X-4K 20.4/40.0/60.0/80.0 GB AT
3.9 TECHNIQUES IN DRIVE CONFIGURATION ................................................ 3-16
3.9.1 The 528-Megabytes Barrier ............................................................................3-16
3.9.2 The 8.4-Gigabytes Barrier ...............................................................................3-16
3.9.3 Operating system limitations ...........................................................................3-17
3.10 SYSTEM STARTUP AND OPERATION ........................................................... 3-17


4.1 SPECIFICATION SUMMARY............................................................................... 4-1
4.2 FORMATTED CAPACITY.................................................................................... 4-4
4.3 DATA TRANSFER RATES.................................................................................... 4-4
4.4 TIMING SPECIFICATIONS................................................................................... 4-5
4.5 POWER................................................................................................................... 4-6
4.5.1 Power Sequencing ............................................................................................4-6
4.5.2 Power Reset Limits ..........................................................................................4-6
4.5.3 Power Requirements ........................................................................................4-7
4.6 ACOUSTICS............................................................................................................ 4-8
4.7 MECHANICAL ....................................................................................................... 4-9
4.8 ENVIRONMENTAL CONDITIONS.................................................................... 4-9
4.9 SHOCK AND VIBRATION................................................................................. 4-10
4.10 HANDLING the DRIVE ....................................................................................... 4-11
4.11 RELIABILITY........................................................................................................ 4-11
4.12 ELECTROMAGNETIC SUSCEPTIBILITY......................................................... 4-12
4.13 SPINDLE IMBALANCE........................................................................................ 4-12
4.14 DISK ERRORS ..................................................................................................... 4-12


5.1 MAXTOR D540X-4K DRIVE MECHANISM....................................................... 5-1
5.1.1 Base Casting Assembly ......................................................................................5-3
5.1.2 DC Motor Assembly .........................................................................................5-3
5.1.3 Disk Stack Assemblies .......................................................................................5-3
5.1.1 Base Casting Assembly ......................................................................................5-3
5.1.2 DC Motor Assembly .........................................................................................5-3
5.1.3 Disk Stack Assemblies .......................................................................................5-3
5.1.4 Headstack Assembly ..........................................................................................5-5
5.1.5 Rotary Positioner Assembly ..............................................................................5-5
5.1.6 Automatic Actuator Lock ..................................................................................5-5
5.1.7 Air Filtration .....................................................................................................5-6
5.2 DRIVE ELECTRONICS......................................................................................... 5-6
5.2.1 µProcessor ........................................................................................................5-7
5.2.2 Digital Synchronous Spoke ...............................................................................5-7
5.2.3 Error Correction Code (ECC) Control .............................................................5-7
5.2.4 Formatter ..........................................................................................................5-7
5.2.5 Buffer Controller ..............................................................................................5-8

Table of Contents
Maxtor D540X-4K 20.4/40.0/60.0/80.0 GB AT vii
5.2.6 Servo Processor ................................................................................................5-8
5.2.7 Read/Write Interface .......................................................................................5-8
5.2.8 ATA Interface Controller .................................................................................5-8
5.2.9 Motor Controller .............................................................................................5-8
5.3 Read/Write ASIC..................................................................................................... 5-8
5.3.1 Pre-Compensator .............................................................................................5-9
5.3.2 Variable Gain Amplifier (VGA) ........................................................................5-9
5.3.3 Butterworth Filter ............................................................................................5-9
5.3.4 FIR (Finite Impulse Response) Filter ................................................................5-9
5.3.5 Flash A/D Converter ........................................................................................5-9
5.3.6 Viterbi Detector ...............................................................................................5-9
5.3.7 ENDEC ...........................................................................................................5-9
5.3.8 Servo Processor ................................................................................................5-9
5.3.9 Clock Synthesizer .............................................................................................5-9
5.3.10 PLL ..................................................................................................................5-9
5.3.11 Serial Interface ................................................................................................5-10
5.3.12 TA Detection and Correction .........................................................................5-10
5.3.13 PreAmplifier and Write Driver ....................................................................... 5-10
5.4 FIRMWARE FEATURES..................................................................................... 5-10
5.4.1 Disk Caching .................................................................................................. 5-10
5.4.2 Head and Cylinder Skewing ...........................................................................5-12
5.4.3 Error Detection and Correction ...................................................................... 5-14


6.1 INTRODUCTION ................................................................................................. 6-1
6.2 MECHANICAL INTERFACE................................................................................ 6-1
6.2.1 Signal Cable and Connector .............................................................................6-1
6.3 ELECTRICAL INTERFACE.................................................................................. 6-1
6.3.1 ATA Bus Interface ............................................................................................6-1
6.4 REGISTER ADDRESS DECODING..................................................................... 6-2
6.5 COMMAND INTERFACE..................................................................................... 6-2
6.5.1 General Feature Set ..........................................................................................6-2
6.5.2 Multiword DMA ..............................................................................................6-3
6.5.3 Ultra DMA Feature Set ....................................................................................6-3
6.5.4 Power Management Feature Set .......................................................................6-3
6.5.5 Security Mode Feature Set ................................................................................6-4
6.5.6 Self-monitoring, Analysis, and Reporting (SMART) Feature Set ......................6-4
6.5.7 Host Protected Area Feature Set .......................................................................6-4
6.5.8 Automatic Acoustic Management Feature Set ...................................................6-4
6.5.9 IDENTIFY DEVICE Information ....................................................................6-5
6.5.10 SET FEATURES Supported Commands .........................................................6-7
6.5.11 Maxtor Specific Commands ..............................................................................6-8
6.5.12 SMART READ ATTRIBUTE THRESHOLDS ..........................................6-15
6.5.13 Device Configuration Overlay Feature Set ......................................................6-21
 

viii Maxtor D540X-4K 20.4/40.0/60.0/80.0 GB AT

Figure 3-1 Mechanical Dimensions of Maxtor D540X-4K Hard Disk Drive .................3-1
Figure 3-2 Drive Packing Assembly ...............................................................................3-2
Figure 3-3 Drive Packing Assembly of a Polypropylene 20-Pack Container ...................3-3
Figure 3-4 Jumper Locations for the Maxtor D540X-4K Hard Disk Drive .....................3-4
Figure 3-5 Jumper Locations on the Interface Connector ...............................................3-4
Figure 3-6 AT Connector and Jumper Location ............................................................3-7
Figure 3-7 Mounting Dimensions for the Maxtor D540X-4K Hard Disk Drives ............ 3-9
Figure 3-8 Mounting Screw Clearance for the Maxtor D540X-4K Hard Disk Drives .. 3-10
Figure 3-9 J1 DC Power and ATA Bus Combination Connector ................................ 3-11
Figure 3-10 Drive Power Supply and ATA Bus Interface Cables .................................... 3-14
Figure 3-11 Completing the Drive Installation ............................................................... 3-15
Figure 5-1 Maxtor D540X-4K AT Hard Disk Drive Exploded View ..................................5-2
Figure 5-2 Maxtor D540X-4K AT Hard Disk Drive Block Diagram .............................5-6

Maxtor D540X-4K 20.4/40.0/60.0/80.0 GB AT ix

Table 3-1 AT Jumper Options.............................................................................................. 3-5
Table 3-2 J1 Power Connector, Section A.......................................................................... 3-12
Table 3-3 Logical Addressing Format.................................................................................. 3-18
Table 4-1 Specifications ........................................................................................................ 4-1
Table 4-2 Formatted Capacity............................................................................................... 4-4
Table 4-3 Timing Specifications............................................................................................ 4-5
Table 4-4 Power Reset Limits............................................................................................... 4-6
Table 4-5 Typical Power and Current Consumption............................................................. 4-7
Table 4-6 Acoustical Characteristics—Sound Power.............................................................. 4-8
Table 4-7 Environmental Specifications................................................................................. 4-9
Table 4-8 Shock and Vibration Specifications...................................................................... 4-10
Table 4-9 Error Rates......................................................................................................... 4-12
Table 5-1 Cylinder Contents................................................................................................. 5-3
Table 5-1 Cylinder Contents................................................................................................. 5-4
Table 5-2 Skew Offsets....................................................................................................... 5-13
Table 6-1 Identify Device Parameters.................................................................................... 6-5
Table 6-2 Supported Features................................................................................................ 6-7
Table 6-3 READ DEFECT LIST LENGTH Command Bytes ............................................. 6-8
Table 6-4 READ DEFECT LIST Command Bytes .............................................................. 6-9
Table 6-5 DEFECT LIST DATA FORMAT..................................................................... 6-10
Table 6-6 DEFECT ENTRY DATA FORMAT............................................................... 6-10
Table 6-7 Accessing the READ CONFIGURATION Command...................................... 6-11
Table 6-8 Accessing the SET CONFIGURATION Command.......................................... 6-12
Table 6-9 Accessing the SET CONFIGURATION WITHOUT
SAVING TO DISK Command .......................................................................... 6-12
Table 6-10 Configuration Command Format........................................................................ 6-13
Table 6-11 Device Attribute Thresholds Data Structure ....................................................... 6-16
Table 6-12 Individual Threshold Data Structure ................................................................... 6-17
Table 6-13 Device SMART Data Structure.......................................................................... 6-17

Table of Contents
x Maxtor D540X-4K 20.4/40.0/60.0/80.0 GB AT

Maxtor D540X-4K 20.4/40.0/60.0/80.0 GB AT 1-1


This chapter gives an overview of the contents of this manual, including theintended
audience,how the manual isorganized, terminology and conventions, and references.
! 
The Maxtor D540X-4K 20.4/40.0/60.0/80.0 GB AT ProductManual is intended for
several audiences. These audiences include: the end user, installer, developer,
consumer electronics and personal computer original equipment manufacturer (CE/
PC OEM), and distributor. The manual provides information about installation,
principles of operation, interface command implementation, and maintenance.
The Maxtor D540X-4K family of drives provide a high-quality, low-cost, market
leading 40 GB per disk products to serve the consumer and mainstream commercial
markets, as well as the consumer electronics market.
! "
This manual is organized into the following chapters:
•Chapter 1 –About This Manual
•Chapter 2 –General Description
•Chapter 3 –Installation
•Chapter 4 –Specifications
•Chapter 5 –Basic Principles of Operation
•Chapter 6 –ATA Bus Interface and ATA Commands
! #$
In the Glossary at the back of this manual, you can find definitions for many of the
terms used in this manual. In addition, the following abbreviations are used in this
manual:
•ASIC application-specific integrated circuit

About This Manual
1-2 Maxtor D540X-4K 20.4/40.0/60.0/80.0 GB AT
•ATA advanced technology attachment
•bpi bits per inch
•dB decibels
•dBA decibels, A weighted
•DPS Data Protection System
•SPS Shock Protection System
•ECC error correcting code
•Kfci thousands of flux changes per inch
•Hz hertz
•KB kilobytes
•LSB least significant bit
•mA milliamperes
•MB megabytes (1 MB = 1,000,000 bytes when referring to disk
transfer rates or storage capacities and 1,048,576 bytes in all
other cases)
•Mb/s megabits per second
•MB/s megabytes per second
•MHz megahertz
•ms milliseconds
•MSB most significant bit
•mV millivolts
•ns nanoseconds
•tpi tracks per inch
•µs microseconds
•Vvolts
The typographical and naming conventions used in this manual are listed below.
Conventions that are unique to a specific table appear in the notes that follow that
table.
Typographical Conventions:
•Names of Bits: Bit names are presented in initial capitals. An example
is the Host Software Reset bit.
•Commands: Interface commands are listed in all capitals. An example
is WRITE LONG.
•Register Names: Registersaregivenin this manualwithinitialcapitals.
An example is the Alternate Status Register.

Ab out This Manual
Maxtor D540X-4K 20.4/40.0/60.0/80.0 GB AT 1-3
•Parameters: Parameters are given as initial capitals when spelled out,
and are given as all capitals when abbreviated. Examples are Prefetch
Enable (PE), and Cache Enable (CE).
•Hexadecimal Notation: The hexadecimal notation is givenin 9-point
subscript form. An example is 30H.
•Signal Negation: A signal name that is defined as active low is listed
with a minus sign following the signal. An example is RD–.
•Messages: A message that is sent from the drive to the host is listed in
all capitals. An example is ILLEGAL COMMAND.
Naming Conventions:
•Host: In general, the system in which the drive resides is referred to as
the host.
•Computer Voice: This refers to items you type at the computer
keyboard. These items are listed in 10-point, all capitals, Courier font.
An example is FORMAT C:/S.
! 
For additional information about the ATA interface, refer to the latest revision of the
draft standard on the internet at http://www.t13.org/ using the link under “1410D
AT Attachment - 6 with Packet Interface (ATA/ATAPI - 6).”

About This Manual
1-4 Maxtor D540X-4K 20.4/40.0/60.0/80.0 GB AT

Maxtor D540X-4K 20.4/40.0/60.0/80.0 GB AT 2-1

!!"#!"$
This chapter summarizes the general functions and key features of the Maxtor
D540X-4K 20.4/40.0/60.0/80.0 GB AT hard disk drives, as well as the applicable
standards and regulations.
! $$%
Maxtor’s D540X-4K hard disk drives are part of a family of high performance, 1-
inch-high hard disk drives manufactured to meet the highest product quality
standards.
These hard disk drives use nonremovable, 3 1/2-inch harddisks andareavailable
with the ATA interface.
The Maxtor D540X-4K 20.4/40.0/60.0/80.0 GB AT hard disk drives feature an
embedded hard disk drive controller, and use ATA commands to optimize system
performance. Because the drive manages media defects and error recovery
internally, these operations are fully transparent to the user.
The innovative design of the Maxtor D540X-4K hard disk drives incorporate
leading edge technologies such as UltraATA/100, Advanced Cache Management,
Shock Protection System™II (SPS II), and Data Protection System (DPS). These
enhanced technologies enable Maxtor to produce a family of high-performance,
high-reliability drives.
Additionally, the Maxtor D540X-4K family of drives are CE-class drives designed
for the consumer electronics market.Acoustics is one of the most importantfeatures
in the CE arena. These hard disk drives are available with very quiet seek codes
resulting in very low acoustical emissions from the drive. This makes the Maxtor
D540X-4K drives an attractive choice for most CE users.

General Description
2-2 Maxtor D540X-4K 20.4/40.0/60.0/80.0 GB AT
! &#
The Maxtor D540X-4K 20.4/40.0/60.0/80.0 GB AT hard disk drives include the
following key features:
General
•Formatted storage capacity of 20.4 GB (1 disk, 1 heads), 40.0 GB (1 disks,
2 heads), 60.0 (2 disks, 3 heads) and 80.0 (2 disks, 4 heads)
•Low profile, 1-inch height
•Industry standard 3 1/2-inch form factor
•Compliance with ANSI/NCITS interface standard for AT Attachment,
revision 6 (ATA/ATAPI-6).
•Windows NT and 9X Certification
Performance
•Average seek time of 12 ms
•Average rotational latency of 5.56 ms
•New Ultra ATA interface with Maxtor-patented UltraATA/100
protocol supporting burst data transfer rates of 100 MB/s.
•Extra quiet seek code available (Maxtor Quiet Drive Technology)
•2 MB buffer
•Look-ahead DisCache feature with continuous prefetch and
WriteCache write-buffering capabilities
•Read promotion and Write Reordering features
•AutoTask Register update, Multi-block AutoRead, and Multi-block
AutoWrite features in a custom ASIC
•Support of all standard ATA data transfer modes with PIO mode 4 and
multiword DMA mode 2, and Ultra DMA modes 0, 1, 2, 3, 4 and 5
Reliability
•800,000 hours mean time between failure (MTBF) in the field
•Automatic retry on read errors
•Error Correcting Code (ECC) with 15 symbols cross checking
correction up to 142 bits in length
•S.M.A.R.T. 4 (Self-Monitoring, Analysis and Reporting Technology)
•Patented Airlock®automatic shipping lock, magnetic actuator retract,
and dedicated landing zone
•Transparent media defect mapping

General Description
Maxtor D540X-4K 20.4/40.0/60.0/80.0 GB AT 2-3
•High performance, in-line defective sector skipping
•Reassignment of defective sectors discovered in the field, without
reformatting
•ShockProtectionSystemIItoenhanceprotection againstbothoperating
and non-operating shock
•Data Protection System to verify drive integrity
Versatility
•Power saving modes
•Downloadable firmware
•Cable select feature
•Ability to daisy-chain two drives on the interface
Windows MS Logo Certification
•Passed Windows Me, Windows 98, Windows 2000, and Windows NT
Workstation 4.0 Logo testing byMicrosoftWindows Hardware Quality
Labs (WHQL)
•Master ID# 43395
! '()*+*,)-./.001
Maxtor Corporation’s disk drive products meet all domestic and international
product safety regulatory compliance requirements. Maxtor’s disk drive products
conform to the following specifically marked Product Safety Standards:
•Underwriters Laboratories (UL) Standard 1950. This certificate is a
category certification pertaining to all 3.5-inch drive models in the
U.S.A. and Canada.
•TUV Rheinland Standard EN60 950. This certificate is a category
certification pertaining to all 3.5-inch drive models.

•CE Mark authorization is granted by TUV Rheinland in compliance
with our qualifying under EN 55022:1994 and EN 50082-1:1997.
•C-Tick Mark is an Australian authorization marked noted on Maxtor’s
disk drive products. The mark proves conformity to the regulatory
compliance document AS/NZS 3548: 1995 and BS EN 55022: 1995.
•Approval from Taiwan BSMI. Number: 3892A638
•Korea EMI certification approved. MIC number: EH011-01-1977

General Description
2-4 Maxtor D540X-4K 20.4/40.0/60.0/80.0 GB AT
Maxtor’s disk drives are designed as a separate subassembly that conforms to the
FCC Rulesfor Radiated and Conducted emissions, Part15 Subpart J;ClassB when
installed in a given computer system.
! %2
The Maxtor D540X-4K hard disk drives are compatible with computers and other
hosts that support the ATA interface. It connects to the host either by means of a
third-party ATA-compatible adapter board, or by plugging a cable from the drive
directly into a PC motherboard that supplies an ATA interface.

Maxtor D540X-4K 20.4/40.0/60.0/80.0 GB AT 3-1
%

This chapter explains how to unpack, configure, mount, and connect the Maxtor
D540X-4K 20.4/40.0/60.0/80.0 GB AT hard disk drive prior to operation. It also
explains how to start up and operate the drive.
! 2
The Maxtor D540X-4K hard disk drives are shipped without a faceplate. Figure 3-
1 shows the external dimensions of the Maxtor D540X-4K 20.4/40.0/60.0/80.0
GB AT drives.
 Mechanical Dimensions of Maxtor D540X-4K Hard Disk Drive

Installation
3-2 Maxtor D540X-4K 20.4/40.0/60.0/80.0 GB AT
! &
1. Open the shipping container and remove the packing assembly that
contains the drive.
2. Remove the drive from the packing assembly.
3. When you are ready to install the drive, remove it from the ESD bag.
Figure 3-2 shows the packing assembly for a single Maxtor D540X-4K hard disk
drive. A 20-pack shipping container is available for multiple drive shipments.
 Drive Packing Assembly
 !" The maximum limits for physical shock can be exceeded if the
drive is not handled properly. Special care should be
taken not to bump or drop the drive. It is highly recommended
that Maxtor D540X-4K drives are not stacked or placed on any
hard surface after they are unpacked. Such handling could cause
media damage.
 !" During shipment and handling, the antistatic electrostatic dis-
charge (ESD) bag prevents electronic component
damage due to electrostatic discharge. To avoid accidental dam-
age to the drive, do not use a sharp instrument to open the ESD
bag and do not touch PCB components. Save the packing mate-
rials for possible future use.