Maxwell 3 User manual

Maxwell 3 - Sennheiser DW Series
Introduction
Here we describe how the Sennheiser DW Series are connected to the Maxwell 3.
Connecting Base Station to the Maxwell
Use a normal 8 pin Ethernet cable (17)
Connect to the Sennheiser Base station socket.(8)Phone
Connect to the Maxwell 3 socket (6).EHS
Sennheiser DIP switch settings
Set the DIP switch and to the lower position.1 4
Adjusting the audio signal
Set the switch (6) to (Default), or so that you can hear a clear signal.ABC A B C

Adjusting the Microphone sensitivity
To change the volume, adjust the microphone volume control accordingly
Introduction
Connecting Base Station to the
Maxwell
Sennheiser DIP switch settings
Adjusting the audio signal
Adjusting the Microphone sensitivity