MB QUART NAUTIC NF1-116SB Instruction Manual

If you are replacing an older or inferior speaker, the
location is chosen for you. Make sure the speaker ts
properly in the hole for the old speaker.
If you are creating your own new location, you must be
careful to verify that there is sufcient depth to mount the
speaker.
Choose a suitable
mounting location
Speaker Mounting Location
Speaker Dimensions
CAUTION
Always consider consulting a professional audio installer
before installing new speakers. Many manufacturers locate
speakers behind interior panels that require special tools to
remove. Be careful and take your time.
If you are using the speaker wire supplied with your new
speakers make sure that you run the speaker wires only
through safe areas. Do not let speaker wire make contact with
metal edges or hot engine components.
Congratulations on your choice of a MBQuart speaker.
This “Quick Start” Installation guide is meant to help
you complete a basic installation. For more detailed
information on system setting, speaker and subwoofer
conguration, and full specications by model, visit our
website at mbquart.com
It’s a good idea to conrm that you have purchased the
correct size speakers to t your application. If you have any
reservations about being able to complete the installation
yourself, we recommend contacting a professional.
A B C D
NF1-116SB/SW 7.5” (190.5) 1” (25.4) 1.125” (29) 5.25” (133.4)
Before you start
Once you are sure the speaker ts and has
adequate clearance, connect the positive and
negative wires to the proper terminals. Securely
screw the speaker into place.
Carefully select a route for the speaker wires. If
using existing speaker wires, conrm that the wire is
in good shape and not shorted.
Conrm t and
mount speaker
Route signal
Speaker installation
Wiring
A
C
B
D
Audio Signal
Negative
Audio Signal
Positive
A
C
B
D
Audio Signal
Negative
Audio Signal
Positive

Quick Start
Installation Guide
WARRANTY
Maxxsonics, LLC. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics, LLC. will, at it’s discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper
installation and use must be returned to the original authorized Maxxsonics, LLC. retailer from
where it was purchased. A photocopy of the original receipt must accompany the product being
returned. The costs associated with removal, re-installation and freight are not the responsibility of
Maxxsonics, LLC. This warranty is limited to defective parts and specically excludes any incidental
or consequential damages connected therewith. To view the full warranty, please visit the website.
MB Quart products are designed and engineered in the USA by
www.maxxsonics.com
NF 1-116SBNF 1-116SB
NF 1-116SWNF 1-116SW
NAUTICNAUTIC
ULTRA COMPACT SPEAKERSULTRA COMPACT SPEAKERS
MBQ NF1-116SB/SW QSG 01 - rev1
NF1 SPEAKER ASSY.
0
DO NOT
SCALE DRAWING
0192-NF1-116.
SHEET 1 OF 2
11.15.2018
ZOFIA RYAN
SCALE: 1:2
REV
DWG. NO.
B
SIZE
DESCRIPTION:
DRAWN BY:
WHITE
AS PER BOM
FINISH:
MATERIAL:
DRAWN DATE:
851 E Park Ave, Libertyville,IL 60048
DIMENSIONS ARE IN MM
TOLERANCES:
ONE PLACE DECIMAL 0.1
TWO PLACE DECIMAL 0.5
UNLESS OTHERWISE
SPECIFIED:
NO SHARP CORNERS AND
EDGES.
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN
THIS DRAWING IS THE SOLE PROPERTY
OF MAXXSONICS USA, INC.
ANY REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN
PERMISSION OF MAXXSONICS USA, INC.
IS PROHIBITED.