MB QUART NAUTIC NT1-116 Instruction Manual

NAUTIC
Quick
Start
Installation
Guide
NT1-116
NT1-116L
NT1-120
NT1-120L
NT1-116B
NT1-116LB
NT1-120B
NT1-120LB
®

Congratulations on your choice of a MBQuart speaker.
This."Quick Start" Installation guide
is meant to help
you complete a basic installation. For more detailed
information on system setting, speaker and subwoofer
configuration, and full specifications by model, visit our
website at mbquart.com
I
•
CAUTION
I
•
Always consider consulting a professional audio installer
before installing new speakers. Many manufacturers locate
speakers behind interior panels that require special tools to
remove. Be careful and take your time.
If you are using the speaker wire supplied with your new
speakers make sure that you run the speaker wires only
through safe areas. Do not let speaker wire make contact with
metal edges or hot engine components.
Dimensions
-i44mm r
1
1.73" I
.___ __ 215mm -- ----1
r- 8.47"
Before you start
230mm
9.04"
274mm
1-------- 10.78" ------1
It's a good idea to confirm that you have purchased the
correct size speakers to fit your application. If you have any
reservations about being able to complete the installation
yourself, we recommend contacting a professional.

Mounting
Location
Choasa
a
suilabla
moanting f:asalion ·
Tube
The NT1 clamping system is designed for towers
and support structures that utilize
ROUND
tubing.
Oval tubing and flat structures will not work with
this clamp. The
NT1
clamp can be used with tube
diameters from 1.5" up to
2.
75". Included are
separate bushing sets for all tube sizes
at
1
/8"
increments. Refer to the table below to determine
your
configuration.
Tube Clamp Top Bottom
Diameter Circumference Bushing Bushing
1.5 4.71 A 1.50 1.50
1.625 5.10 A 1.63 1.63
1.75 5.50 A 1.75 1.75
1.875 5.89 A none 1.88
2 6.28 B 2.00 2.00
2.125 6.68 B 2.13 2.13
2.25 7.07 B 2.25 2.25
2.375 7.46 B 2.38 2.38
2.5 7.85 B 2.50 2.50
2.625 8.25 B 2.68 2.68
2.75 8.64 B none none

Wiring
Raulssignal
and
illllmfnallon wires Carefully select a route for the audio signal
wires. If using existing speaker wires, confirm
that the wire is
in
good shape and not
shorted.
In
the case of an illuminated model,
route a positive and negative wire from a
switched +12V source. Avoid routing wires
through dangerous areas.
Black ...................................... Audio signal negative
Black w/white stripe ................ Audio signal positive
Black ....................................... Illumination negative
Red ......................................... Illumination positive

Grill
alignment
Adjust the speaker
alignment
Your
NT1
speakers can be aligned to "hang straight"
on an angled tube by loosening, rotating and
re-mounting the speaker. Just behind the speaker
mounting holes
is
a series mounting holes that can
be used to align the speaker
in
the pod.
Illumination
control
If you have purchased an illuminated version, consider getting an N1-RC remote
control. The remote allows you to adjust color, speed and brightness
of
the
illumination. Check with
an
authorized MBQuart retailer or check our website
www.mbquart.com for further details.

M
BOuart.corn
#MUSIC
DEFINED
WARRANTY
'
Maxxsonics USA Inc. warrants this product, to the original consumer purchaser, to
be
free from
defects
in
material and workmanship for a period
of
one (1) year from the date of purchase.
Maxxsonics USA Inc. will, at it's discretion, repair or replace defective products during the warranty
period. Componentsthat prove to
be
defective
in
materialsand workmanship underproperinstallation
and use must
be
returned to the original authorized Maxxsonics USA Inc. retailer from where it was
purchased. A photocopy of the original receipt must accompany the product being returned. The
costs associated with removal, re-installation and freight are not the responsibility of Maxxsonics
USA Inc. This warranty is limited to defective parts and specifically excludes any incidental or
consequential damages connected therewith.
To
view the full warranty, please visit the website.
Hifonics
products
are
designed
and engineered
in
the USA
by
IMIAXX.S"DNIC:S®
847-540-7700
www.maxxsonics.com
MBQ NT QSG
01
-rev3

CL150 CL225
Clamp A
CL163
CL238
CL 17 5
CL200 CL250
CL 18 8
CL213
CL268
;.;.-.Y
" t_•'
' 1•.