MECALAC AHLMANN Mecadiag User manual

www.mecadiag.com
By
Mecalac - 2, avenue du Pré de Challes - P.A.E. des Glaisins - BP 230 - F - 74942 Annecy-le-Vieux Cedex - Tél. : [phone]
ecaDIAG
MDU_Mecadiag_GB // 05/2010
THE DIAGNOSTIK TOOL
MECALAC MANUAL

Using the tool MecaDiag is reserved exclusively for the maintenance
personnel who received training from Mecalac or a training
organization approved by Mecalac.
To avoid the risk of accidents the technician must release the implement
fitted to the tool holder, extend equipment lower the equipment to the
ground before connecting the tool to the diagnosis plug of the machine.
Download
The download operation of software should be performed only as part of an
exchange of a computer or an update proposed by Mecalac.
After downloading the technician must test all functions of the machine before
delivery to the driver.
Remote coding
After a remote coding the serviceman must test all functions of the machine
before delivery to the driver.
Beware bad remote coding of tool holder can release the tool.
Setting
After setting the serviceman must test all functions
of the machine before delivery to the driver.
Learning
After learning the serviceman must test all functions of the machine before
delivery to the driver.
Actuator Test
Before practice test actuator it is imperative to extend and lay the
equipment to the ground.
In case of exchange of one or more computers it is imperative to check
that embedded software corresponds to the machine and that the remote
coding corresponds to the options installed on the machine before starting.
After starting the technician must test all functions of the machine before
delivery to the driver.
Safety on the use of the tool
ecaDIAG
All rights of reproduction reserved in all countries. Any reproduction, even partial, of this publication is unlawful and constitutes an infringement.
Non-contractual photographs.

GB
3
PC Software Installation and Use
01. PC Software Installation and Use
02. Pocket MecaDiag Characteristics
03. Presentation of Mecadiag Pocket
04. Navigation in the menus & main functions
Summary
01
Starten des CD-ROMS
DO NOT CONNECT TO PC, the tool Mecadiag Pocket before the installation of the PC program.
Double click on file MecadiagPC_Setup.exe to start the PC program installation.
Choose the language in the rolling
menu with French by default.
LOADING of MECADIAG PC program
Make a double click on icon of tool Mecadiag called
« MecaDiagPC_Setup ».

GB
4
Here the welcome window from the
installation program. Click on « Next »
(« Suivant ») button.
The program offers an installation
repertory.
Push on button « Next » (« Suivant »),
otherwise click on button « Browser »
(« Parcourir ») to choose another
repertory.
The program offers an installation in
the menu « Start » (« Démarrer »).
Click on button « Next »(« Suivant »)
otherwise click on button « Browser »
(« Parcourir ») to choose another menu.

GB
5
The program proposes the creation
of an icon on the desk.
Click on button « Next » (« Suivant »)
or otherwise click in the case
corresponding to « Icon on desk »
(« Icône sur bureau ») or « In start bar »
(« Dans barre de lancement »).
Click on button « Install »(« Installer »)
to activate the installation process
of MecadiagPC program.
Installation process running.