medemagroup Mini Crosser X1 Cabin User manual

User Manual Mini Crosser X1 Cabin
1533-2005-B ver. 1.0.3 - June 2020 GB
medemagroup

User guide 1533-2005-B 2 of 64 Version 1.0.3 - 2020
Medema A/S
Serial number: ___-______________-______-_______
Delivery date: ________________ Year 20______
This vehicle was supplied by: Date: /

User guide 1533-2005-B 3 of 64 Version 1.0.3 - 2020
Medema A/S
Contents
Intended occupant................................................................. 5
Help for the visually impaired .............................................. 5
FSN (Field Safety Notice)...................................................... 5
Symbols.................................................................................. 6
Warning!................................................................................. 6
Contagion!.............................................................................. 6
Introduction............................................................................ 7
Declaration of conformity..................................................... 8
Medema A/S Warranty........................................................... 9
Control panel ......................................................................... 10
Preparations / Adjustments prior to use............................. 13
Electric seat adjustment....................................................... 15
Seat rotation........................................................................... 16
Steering column .................................................................... 17
Serial number......................................................................... 18
Driving the Mini Crosser X1 Cabin....................................... 19
Lap belt................................................................................... 22
Specic driving situations.................................................... 24
Long hills/di󰀩cult ground .................................................... 26
Anti-tilt wheels / stabilisers.................................................. 27
General care and maintenance ............................................ 28
Insurance................................................................................ 29
Batteries................................................................................. 30
Charging................................................................................. 30
Battery disposal..................................................................... 32
Storage................................................................................... 32
Cleaning ................................................................................. 32
Fuel for heater........................................................................ 33
Heater ..................................................................................... 33
Windscreen wiper / washer .................................................. 34
Replacing the wiper blade.................................................... 35
Replacing the headlight........................................................ 35
Changing the wheels............................................................. 37
Fuses...................................................................................... 39
Brakes..................................................................................... 41
Disengagement...................................................................... 42
Transporting by motor vehicle............................................. 43
Securing to vehicle oor with belts..................................... 44
Transporting by plane........................................................... 46
Towing.................................................................................... 46
Dimensioned drawing, Mini Crosser X1 Cabin................... 47
Introduction to the Ergo2 seat ............................................. 48

User guide 1533-2005-B 4 of 64 Version 1.0.3 - 2020
Medema A/S
Flame resistance ................................................................... 52
Basket on the back of the cabin........................................... 53
Troubleshooting .................................................................... 54
Electronic faults..................................................................... 55
Programming......................................................................... 56
Technical data........................................................................ 57
Weight of the seats................................................................ 60
Own notes.............................................................................. 61

User guide 1533-2005-B 5 of 64 Version 1.0.3 - 2020
Medema A/S
Intended occupant
The intended occupant of the Mini Crosser X is a person with
limited ability of walking themselves.
The occupant must be able to see in order to register tra󰀩c sig-
nals and other road users when driving in tra󰀩c. The occupant
can be deaf and/or speechless.
The occupant must have a cognitive ability to understand the
operation of a scooter and its buttons and icons.
The Mini Crosser can be driven with only one hand either left or
right.
The maximum occupant weight is 175 kg.
Help for the visually impaired
If you have di󰀩culty reading small print in the user manual, we
recommend that you visit our website, where you can read this
manual in PDF format. You can enlarge the PDF manual on
your PC monitor to suit your needs and preferences.
If you nd it di󰀩cult to understand the manual and have general
questions about the product, please feel free to contact us. You
can nd our contact info on page two in this user manual.
You can nd manuals for all our products on our web page
www.medema.dk. Or contact Medema A/S, and we can send
the manuals in a mail for you. Find the contact information on
page two in this manual.
FSN (Field Safety Notice)
All information concerning safety can be found at www.mede-
ma.com, which is always updated with the latest safety informa-
tion. In the event of important safety-related changes, we will
notify our customers directly (FSN).

User guide 1533-2005-B 6 of 64 Version 1.0.3 - 2020
Medema A/S
Symbols
Used in the manual to indicate sections describing situations
where extra care is required owing to the risk of personal injury.
Used to indicate sections on electromagnetic compatibility
(EMC).
Warning!
For safety reasons the vehicle must not be lent to persons who
are not completely familiar with it. The vehicle is designed for
one person only.
The Mini Crosser X1 Cabin has been designed for users weigh-
ing max. 175 kg. The vehicle can be specially adapted at the
factory for users weighing up to 200 kg.
Contagion!
A standard Mini Crosser is equipped with tyres that does not
contage, but if another type of tyres are used, it can sometimes
rub o󰀨 on oor coverings, particularly linoleum. Medema A/S as-
sumes no responsibility in case of contagion.
To prevent this, we recommend that you protect delicate oors
with some sort of driving surface.

User guide 1533-2005-B 7 of 64 Version 1.0.3 - 2020
Medema A/S
Introduction
Congratulations on your new Mini Crosser X1 Cabin electric
mobility Mini Crosser.
You have now taken possession of an electric mobility Mini
Crosser developed for outdoor driving by active users. It is what
is called a Class C vehicle in according to the European stand-
ard EN 12184.
For optimum enjoyment of this vehicle - and to avoid break-
downs and accidents - we recommend that you read this User
Manual carefully. As a new user, you should pay particular atten-
tion to the section entitled “Driving the Mini Crosser X1 Cabin”.
The Mini Crosser X1 Cabin is designed for safe travel for at
least 10 years, up to a max. of 5,000 hours, provided it is ser-
vice and safety inspections every third year, corresponding to
1500 hours of operation. The service must be carried out by an
authorised workshop.
IMPORTANT! For safety reasons it is of the outmost importance
that service and safety check intervals are complied with, as
this minimises the risk of brake failure and short-circuits in the
wiring, which could generate heat and cause a re.
We o󰀨er a wide range of accessories for the Mini Crosser
X1 Cabin that can make everyday life easier for you. You are
always welcome to contact us for further information on special
accessories and adaptations.
Medema A/S is not responsible for any damage or injuries caused
by inappropriate or unsafe use of the Mini Crosser X1 Cabin.
If you have any further questions about the Mini Crosser X1
Cabin or this User Manual, you are always welcome to get in
touch. Our contact details are as follows:
Medema A/S
Tel: [phone]
Email: [e-mail]
Internet: www.minicrosser.com
NB: Errors and omissions excepted. We reserve the right to
update this manual as required.

User guide 1533-2005-B 8 of 64 Version 1.0.3 - 2020
Medema A/S
Declaration of conformity
Model: Mini Crosser X1 CAB
Medema-A/S declares on our sole responsibility that the product
range mentioned below are manufactured in accordance with our
incorporated standards and are in conformity with the following direc-
tives and standards if they are used according to our instructions:
Regulation (EU) 2017/745 of the European Parliament and of the
Council of 5 April 2017 on medical devices.
EN 12184:2014 Electrically powered wheelchairs, scooters and
their chargers - Requirements and test methods
Risk analysed according to ISO 14971:2012, Medical devices –
Application of risk management to medical devices.
Type of use : Transporting walking disabled people
Risk Class : I
The product range in the Mini Crosser model-X1 includes the fol-
lowing items
Product name Basic UDI-DI
Mini Crosser X1 3W 10kmh 5707299MCX1-3W105V
Mini Crosser X1 3W 13kmh 5707299MCX1-3W1363
Mini Crosser X1 3W 15kmh 5707299MCX1-3W1367
Mini Crosser X1 4W 10kmh 5707299MCX1-4W1064
Mini Crosser X1 4W 13kmh 5707299MCX1-4W136A
Mini Crosser X1 4W 15kmh 5707299MCX1-4W156E
Mini Crosser X1 HD 4W 10kmh 5707299MCX1-4WHD1057
Mini Crosser X1 CAB 10 kmh 5707299MCX1-CAB10JR
Mini Crosser X1 CAB 13 kmh 5707299MCX1-CAB13JX
Mini Crosser X1 CAB 15 kmh 5707299MCX1-CAB15K3
The Mini Crosser or parts (fx. batteries) af the Mini Crosser can,
for a fee, be taken to the nearest dealer for disposal in accordance
with current environmental regulations.
Manufacturer: Medema A/S
Address: Enggårdvej 7, DK-7400 Herning
Tel. [phone]
Date: 16.03.2020 Signature: _____________________
Managing director Finn Dose

User guide 1533-2005-B 9 of 64 Version 1.0.3 - 2020
Medema A/S
Medema A/S Warranty
1:
There is a 2-year warranty, with the exception of worn parts
such as tires, hoses, fuses, light bulbs, bushings and brake
pads.
2:
If you want to make a claim for a part under the warranty, it
must be intact. The warranty will be void if the product has been
removed or appears to have been mishandled.
3:
There is a 5-year warranty against breakage and corrosion of
the undercarriage.
4:
For the warranty to cover batteries, the charger used must be
sold by Medema A/S.
The fabric, type and serial number must be indicated on the
warranty specication, otherwise, warranty coverage may be
denied.
5:
Items returned under a warranty claim must be suitably pack-
aged to prevent damage during transport. Items damaged
during transport due to poor packaging will not covered by the
warranty.
6:
The warranty does not cover freight costs.
7:
The warranty requires annual inspection and maintenance of
the Mini Crosser by authorised professionals.

User guide 1533-2005-B 10 of 64 Version 1.0.3 - 2020
Medema A/S
Control panel
Avoid subjecting the control panel to jarring and knocks. Take
care when driving and avoid hitting obstacles.
The manufacturer accepts no liability in respect of the unauthor-
ised opening, adjustment or modication of the control panel.
Lever for adjusting the angle of the
handlebars
Charging socket
Key switch
Indicator lights, R/L
Horn
Accelerator
(four-nger control)
Indicator lights,
R/L
Horn
Speed selector
Hazard warning lights
Battery indicator
Hand brake
Light switch

User guide 1533-2005-B 11 of 64 Version 1.0.3 - 2020
Medema A/S
Accelerator
(four-nger control)
Air channel
Windscreen wiper + washer
Heat regulation
Accelerator (four-nger control)
The accelerator forward and backwards
are physically connected, which means
that when one or the other is activated,
the other will move the opposite way.

User guide 1533-2005-B 12 of 64 Version 1.0.3 - 2020
Medema A/S
Designation Description
Key switch To start the vehicle:
Turn the key to driving position (1) When the Mini Crosser is
turned on, the control system performs a safety check of the
electrical system. The check lasts half a second. If the accel-
erator is operated during this time, the Mini Crosser will not be
able to move until you have turned the key to 0 and back to 1.
Speed selector The tortoise in minimum position indicates the lowest speed
range. 0-6 km/h
The hare in maximum position indicates the highest speed
range. Up to 15 km/h
Battery indicator
Lights up when the key is turned. Indicates, after half a second,
the battery charge level. It gives a more precise indication after
approx. 1 minute of driving. When the red, amber and green
sections are lit, the batteries are fully charged. When the indi-
cator is at the bottom of the amber section, the batteries should
be charged as soon as possible. If only the red section is lit or
ashing, the batteries must be charged immediately.
Hand brake Acts on the rear wheel and should only be used as an extra
/emergency brake and parking brake. It can be secured in
locked position.
Accelerator
Activate the arm at the front slowly and the Mini Crosser will
start to move forwards. The more the arm is pressed, the faster
the Mini Crosser will move. When the arm is released, it will ip
back to starting position of its own accord and the Mini Crosser
will stop. Activating the rear arm will cause the Mini Crosser to
reverse. The magnetic brake on the rear wheels will engage
when the Mini Crosser is stationary and is equivalent to the park-
ing brake on a car. The accelerator can also be used to control
speed downhill. In this case the motor will act as a brake.
Light switch Turns on the front and rear lights. The key switch must be in
position 1 (driving position).
Hazard warning
lights Turns on all the indicator lights at once. Also works when the key is removed or turned to position 0 (stop position).
Indicator switch Left arrow: indicator, left-hand side. Right arrow: indicator,
right-hand side. Activate the same switch to turn the indicators
o󰀨.
Horn Powerful electric horn. Press the horn switch to activate.
Charging socket Turn o󰀨 the key switch during charging. Please note that it is
not possible to drive the Mini Crosser while the batteries are
char-ging. See also the section entitled “Batteries and charg-
ing”.
Windscreen wiper Starts the windscreen wiper. Notice the variable speed ajust-
ment.
windscreen
washer Spraying washer uid on the front window.
Fresh-air/hot-air
switch Switch to toggle between heated and unheated air.
Heat regulation
Adjustable heat in the cabin. Note: Heat can be turned on even
if the key is not in the key switch. Heating ribs should NOT be
covered.
REMEMBER! turn o󰀨 the heat when you leave the vehicle. Oth-
erwise the batteries may be at the next time you want to use it.

User guide 1533-2005-B 13 of 64 Version 1.0.3 - 2020
Medema A/S
Preparations / Adjustments prior to use
Adjusting the height of the seat
Lift both armrests up, and fold the seatback. Release the handle
so the seat can turn. Turn a little and lift the seat o󰀨.
Make sure you keep your back straight when lifting the seat,
which is very heavy. (See below.)
Lift the seat o the seat tube.

User guide 1533-2005-B 14 of 64 Version 1.0.3 - 2020
Medema A/S
The resease button pressed in. Press
the button out to release the seat tube. Resease button pressed out. Now the seat tube can be moved up/down to the
hight you wish. Press the release button
again and make sure it is tted in one of
the 5 holes in the seat tube.
Hight adjustment seat post with position bolt (option)
Hight adjustment seat post standard
Loosen the counter nut.
Use spanner, 17 mm.
Adjust the seat post to the desired
position. The seat post is marked with a
ring at each centimetre.
Be aware that the black line is holding its position after movement, so the seat is
straight in front of the steering.
Tighten the screw, here after the counter nut.
Mount the seat. Adjust the lining if necessary.

User guide 1533-2005-B 15 of 64 Version 1.0.3 - 2020
Medema A/S
Seat tube in top position. There are ve
holes for adjusting the seat tube. The
release must be in a hole for the seat to
be stable.
Seat tube
Release
Electric seat adjustment
The Mini Crosser can be tted with electric seat adjustment as
an optional extra.
To raise the seat, press the switch up. To lower the seat, press
the switch down. If the switch is released, the seat will stop au-
tomatically. (See gure below.)
For safety reasons, a switch has been incorporated that reduc-
es the speed by 50% when the seat is raised more than 7.5 cm.
Electric seat adjustment. If the switch is pressed up, the seat
is raised. If the switch is pressed down, the seat is lowered.
Switch for electric
seat adjustment

User guide 1533-2005-B 16 of 64 Version 1.0.3 - 2020
Medema A/S
Seat rotation
It is only possible to rotate the seat in a Mini Crosser with Cabin
if both dors are open.
Pull the release lever back. The seat can be rotated 90° to
either side. When the lever is released, it engages with the seat
and holds it in place at 45° intervals.
Other seats that can be supplied for the Mini Crosser work on
similar principles. The release lever is normally mounted on the
right, but can be put on the left if so wished.
Avoid trapping anything when lowering the seat.
Release lever for seat rotation. Release lever for seat forward/back.
IMPORTANT!
The Mini Crosser is most stable when the seat is in its lowest
position.
Take extra care when lowering the seat on a Mini Crosser using
electric seat adjustment. Make sure that nothing is trapped in
the space between the seat and the chassis.

User guide 1533-2005-B 17 of 64 Version 1.0.3 - 2020
Medema A/S
Steering column
Can be adjusted forward/back with the release lever. Pull down
on the lever and pull the handlebars closer for a good driving
position. Use the lever again and push the steering column for-
ward to make it easier to get out.
The height of the steering column can be adjusted approx. 11
cm up/down. First remove the rubber plug covering the Allen
screw. Adjust the height using a 4 mm Allen key.
Adjusting the height of
the handlebars.
Lever for adjusting the angle of
the handlebars
Adjusting the height of
the handlebars.
Allen screw for height
adjustment

2018 18 X1 Kabine
User guide 1533-2005-B 18 of 64 Version 1.0.3 - 2020
Medema A/S
Serial number
All vehicles have a serial number plate showing the year of pro-
duction, month and serial number. The same serial number can
also be found on the front of the User Manual.
Please quote this number when making inquiries about servic-
ing, spare parts, etc.
Maximum user weight
Vehicle’s unladen weight inc.
batteries and seat
Position of serial number plate on vehicle.
Serial number
Model description
Year of production
Max. speed

User guide 1533-2005-B 19 of 64 Version 1.0.3 - 2020
Medema A/S
Driving the Mini Crosser X1 Cabin
Getting in and out
It is important to learn a safe technique for getting in and out of
the Mini Crosser.
In general the following method should be followed:
• Make sure that the Mini Crosser X1 Cabin is o󰀨 (switch turned to
0) when getting in and out, otherwise the Mini Crosser could start
if the accelerator was touched inadvertently.
• Make sure that the brake is on. (Lever for disengaging motor in
top position.)
• Put the steering column in vertical position.
• If necessary, raise the armrest.
Note! - Do NOT use the dors as support, when entering or get-
ting out of the vehicle.
For some users the assistance of an attendant can be recom-
mended. The attendant should:
• Take care not to injure him/herself when lifting/lowering/supporting
the user.
• Make sure that the Mini Crosser is stable and unable to move.
Turn o󰀨 the Mini Crosser and check that the brake is on.
• Make sure that the seat the user is being moved to is stable.
Turn the Mini Crosser o, return the
steering column to upright position and
raise the armrest.
IMPORTANT!
The Mini Crosser will turn itself
o󰀨 automatically after it has
been stationary for 10 min-
utes even if the key has been
turned to driving position. The
battery indicator ashes with
6 lamps at a rate of about 3
seconds.
To restart the vehicle, the key
must be turned to stop posi-
tion (0) and then to driving
position (1).

User guide 1533-2005-B 20 of 64 Version 1.0.3 - 2020
Medema A/S
General safety advice
Make sure that the backrest is upright and the seat is as low as
possible.
Positioning belts are recommended if the user is unable to
maintain a good driving posture independently.
Adjust your driving to road conditions. Take account of light,
tra󰀩c and weather. Be particularly careful when driving in the
dark or in bad weather, such as rain or snow. Avoid driving on
gradients with poor surfaces, such as: snow, ice, new-mown
grass, wet grass and wet leaves.
Never drive when under the inuence. This applies not only to
alcohol, but also to drugs and medicines.
Reduce speed immediately if you feel you are losing control.
Always use the indicators when changing direction.
Check that lights and indicators are working before driving o󰀨.
Use your lights when driving after lighting-up time.
As far as possible, grip the handlebars rmly with both hands.
Take care not to have anything in the basket at the front that
might inadvertently operate the accelerator.
WARNING! Do not lower the handlebars so far that the accel-
erator can hit you on the leg when you turn the vehicle and so
be operated in advertently. If the handlebars need to be very
low, a twist grip accelerator is recommended. This is particularly
relevant if leg supports are being used.
ALWAYS switch the Mini Crosser o󰀨 when it is not in use. Turn
the key to 0.