medemagroup MC Concept 1170 II User manual

Service Manual MC Concept 1170 II
P9-0270-S ver. 2.0.2 - June 2012 GB
medemagroup
S
ervice Manual
MC
C
oncept 1170 I
I
m
e
d
ema
gr
oup

Service manual P9-0270-S 2 of 78 Version 2.0.2/2012
Medema Production A/S

Service manual P9-0270-S 3 of 78 Version 2.0.2/2012
Medema Production A/S
Contents
Introduction............................................................................ 5
Symbols.................................................................................. 6
Warning!................................................................................. 6
Safe servicing........................................................................ 7
Tool list................................................................................... 8
Introduction DX2.................................................................... 9
Inledning DX2......................................................................... 9
Joystick parts ........................................................................ 9
Beteckningar - knappar........................................................ 9
Operating................................................................................ 9
Handhavande......................................................................... 9
Felkoder.................................................................................. 16
Error Code.............................................................................. 16
Joystick parts ........................................................................ 17
Parts Dolphin and Europe joysticks....................................18
Using the G90T and G90A .................................................... 19
Betjening af Dolphin og Europa joystick ............................ 21
Extra locking system............................................................. 22
Replacing Joystick................................................................ 23
Troubleshooting .................................................................... 25
Programming......................................................................... 27
Diagnosing and Troubleshooting ........................................ 28
Maintenance........................................................................... 29
Servicing the MC Concept 1170 II - Concept Chair ............ 31
Checking the rear bar............................................................ 32
Checking the pivot wheel ..................................................... 33
Checking the anti-tilt wheels................................................ 34
Checking the central wheel.................................................. 35
Checking the disengagement............................................... 36
Checking the brakes ............................................................. 37
Replacing the gearmotor...................................................... 38
Replacing the magnetic brake.............................................. 40
Checking the bolts ................................................................ 42
Dismantling Hoist / Tilt.......................................................... 43
Dismantle the bellow............................................................. 44
Checking the security discs................................................. 45
Lubrication of moving parts................................................. 45
Checking the switch.............................................................. 46
Checking for fractures and cracks in the hoist / tilt........... 46
Checking the bolts under the seat....................................... 47
Checking the battery poles and strap ................................. 47
Replacing batteries ............................................................... 48
Dynamic G90A and G90T...................................................... 49

Service manual P9-0270-S 4 of 78 Version 2.0.2/2012
Medema Production A/S
Motor, control - Dynamic ...................................................... 49
Anti tilt wheel......................................................................... 50
Motor....................................................................................... 51
Mounting the bottom frame.................................................. 52
Mounting the rear bumper / curved fork ............................. 53
Mounting the cover ............................................................... 54
Mounting the central wheel - Pneumatic............................. 55
Mounting the central wheel - solid....................................... 56
Seat module 1170 II - electric tilt.......................................... 57
Seat module 1170 II - electric hoist...................................... 58
Headrest Junior..................................................................... 59
Headrest pad adult................................................................ 60
Footrest, electric adult.......................................................... 61
Footrest, manual adult.......................................................... 62
Footrest actuator part........................................................... 63
Mounting bracket for footrest .............................................. 64
Footplate ................................................................................ 65
Calf rest.................................................................................. 66
Central footplate, adult, electric........................................... 67
Central footplate, child, electric........................................... 68
Central footplate, manual ..................................................... 69
Swing-away joystick mount (adult)...................................... 70
Joystick mount, Europa joystick up.................................... 71
Armrest low adult - hight ajustable...................................... 72
Armrest high adult - hight ajustable.................................... 73
Armrest junior - hight ajustable........................................... 74
Wiring diagram ...................................................................... 75
Technical data........................................................................ 76

Service manual P9-0270-S 5 of 78 Version 2.0.2/2012
Medema Production A/S
Introduction
This manual contains servicing instructions for the MC Concept
1170 II.
The Service Manual is a supplement to our Spare Parts
Catalogue and User Manual.
MC Concept 1170 II is designed for safe travel for at least 10
years, up to a max. of 5,000 hours, provided it is serviced and
safety-checked every year, corresponding to 500 hours of
operation. The service must be carried out by an authorised
workshop.
IMPORTANT! For safety reasons it is of the utmost importance
that the servicing and safety check intervals are complied with,
as this minimises the risk of brake failure and short-circuits in
the wiring, which could generate heat and cause a fire.
If help is required with troubleshooting, Medema Production A/S
is always happy to provide telephone assistance. If the problem
seems to be an electrical fault that prevents the MC Concept
1170 II from working, please tell us the error code. This can be
found on the battery indicator on the control panel. Read more
about this in the section on Troubleshooting.
Please also have the MC Concept 1170 II serial number handy
when contacting Medema Production A/S.
If you have any questions that are not answered directly by this
manual, you are always welcome to contact us at:
Medema Production A/S
Tel: [phone]
Email: [e-mail]
Internet: www.minicrosser.dk
NB: Errors and omissions excepted. Specifications subject to
change.
Medema Production also reserves the right to update the
service manual in line with any modifications or improvements
to the product.

Service manual P9-0270-S 6 of 78 Version 2.0.2/2012
Medema Production A/S
Symbols
Used in the manual to indicate sections describing situations
where extra care is required owing to the risk of personal injury.
Used to indicate sections on electromagnetic compatibility
(EMC).
Warning!
For safety reasons the vehicle must not be lent to persons who
are not completely familiar with it. The vehicle is designed for
one person only.
The MC MC Concept 1170 II has been designed for users
weighing max. 155 kg. The vehicle can be specially adapted at
the factory for users weighing up to 200 kg.
Joystick
The joystick control box should not be exposed to extreme
temperatures or be in a humid environment for a long time.
The joystick control box must not be exposed to severe stroke.
Do not turn of the control box while driving, except in
emergencies, since this can damage the electronics.
For cleaning use a damp cloth with a mild soapy solution.
Do not let water or moisture into the steering box.
Seat and backrest
The upholstery fabrics on the seat and backrest can be washed
in a washing machine. Washing instructions are on the back of
the seat pad / backrest.

Service manual P9-0270-S 7 of 78 Version 2.0.2/2012
Medema Production A/S
Safe servicing
To avoid injuries to both the service engineer and the subsequent
user of the MC Concept, it is important to get to know the product
before servicing it.
Be particularly aware of the following:
The MC Concept MUST be turned off at the main switch. If
electrical components are being serviced, the positive terminal on
the battery MUST also be disconnected.
If the voltage needs to be measured in the course of
troubleshooting, take great care not to short-circuit anything.
Take great care not to short-circuit the battery terminals.
Be careful not to lift heavy parts such as the seat, battery and
motor gear incorrectly or drop them.
Make sure to raise one rear wheel off the ground so that the MC
Concept cannot drive off accidentally.
Use professionally maintained tools.
Where lock nuts are used, NEW ones MUST be fitted when the
MC Concept is reassembled.
Take care to fit new cable strips in the same way as the old ones.
Make sure that no cables can be trapped by moving parts or stick
out in such a way as to catch on things.
End every service by making sure that the product is roadworthy:
- Check that all the connectors are plugged in correctly.
- Check that all the mechanical parts are properly secured.

Service manual P9-0270-S 8 of 78 Version 2.0.2/2012
Medema Production A/S
Tool list
The following tools are needed to service the MC Concepten:
Circlip pliers
Allen keys
Allen 9/64
Box spanners, 7-17 mm
Open-ended spanners, 7-17 mm
Phillips and torx screwdrivers, 10/15/20/25 kærv.
Needle-nose pliers
Side-cutting pliers
Plastic hammer
Set of punches
Retractable knife
Steel brush
Water pump pliers
Wire strippers
Crimping tool
Pliers for Molex 5556/5558 crimps
Riveting pliers
Small cable ties
Multimeter
Battery tester
Tyre pressure gauge
Tyre pump with Schrader valve
Acid-free oil and grease
Loctite 406 / 603
Cable ties
Cable tie bar
Circlip Pliers

Service manual P9-0270-S 9 of 78 Version 2.0.2/2012
Medema Production A/S
1
3
5
4
7
8
2
6
Introduction DX2
DX2 is the first in a new generation of joysticks to control the
electric wheelchair. With its large color LCD screen and its
logical icon built menu structure, it directs the user to the target.
Joystick parts
Dynamic DX2 AJR 1 Start/stop button
2 Indicator left
3 Indicator right
4 Select
5 Display
6 Speed selector
7 Accessory Selector
8 Horn
Operating
At the top of the display you will find the status bar. Battery indicator
is displayed constantly. The clock can be turned on or off as you
wish. The other is lit when the corresponding function is active.
1 Battery indicator
Green = fully charged
Yellow = least half full
Red = almost empty - charge now!
2 Indicator left is active
When hazard warning lights are active, both icons blinks.
3 Lights on
4 Error code - see section on error codes.
5 Indicator right is active
When hazard warning lights are active, both icons blinks.
6 Real time
1 2 3 4 5 6
1
3
5
4
7
8
2
6
Inledning DX2
DX2 är den första i en ny generation joysticks för styrning av
elektriska rullstolar. Med sin stora LCD-färgskärm och den
logiska, ikonuppbyggda menystrukturen leder den användaren
till målet.
Beteckningar - knappar
Dynamic DX2 AJR 1 Start-/stopp-knapp
2 Blinker vänster
3 Blinker höger
4 Funktionsväljare
5 Display
6 Hastighetsväljare
7 Tillbehörsväljare
8 Tuta
Handhavande
Högst upp på displayen finns statusraden. Batteriindikatorn
visas hela tiden. Klockan kan visas eller döljas enligt önskemål.
Övriga symboler lyser när motsvarande funktion är aktiv.
1 Batteriindikator
Grön = fulladdat
Gul = laddat till minst hälften
Röd = nästan tomt, ladda nu!
2 Blinker vänster är på
Vid varningsblinkers blinkar båda ikonerna
3 Belysningen är tänd
4 Felkod, se avsnittet om felkoder
5 Blinker höger är på
Vid varningsblinkers blinkar båda ikonerna
6 Aktuell tid
1 2 3 4 5 6

Service manual P9-0270-S 10 of 78 Version 2.0.2/2012
Medema Production A/S
Clock on/off
Press arrow up/down or joystick (push forward) until the above
icon is showed in the center of the screen.
Use ”Select” to switch between X and .
Accept by pressing the arrow up/down button.
Visa/dölja klockan
Tryck på pil upp/ned eller för joysticken framåt tills ovanstående
ikon visas i mitten.
Använd ”funktionsväljaren” för att växla mellan X och .
Godkänn med ett tryck på pil upp/ned.

Service manual P9-0270-S 11 of 78 Version 2.0.2/2012
Medema Production A/S
Set Speed
When you turn the joystick on, the image shown below will be
presented in the display. The number in the centre shows the
speed you have chosen as max speed. Change the Speed by
selecting the plus / minus key. Maximum speed is 5, lowest is 1.
Find the features in the bottom with the “Select” button.
Chosen speed
Select
Chosen speed
Press the arrow up / down until the image shows the chair. Use
the “Select” to choose the function you want modified. Use the
joystick to change example angle of the seat back.
Setting the seat - back and leg supports
Select
Inställning av hastighet
När joysticken slås på visas nedanstående bild på displayen.
I mitten visas den hastighet som valts som högsta hastighet.
Hastigheten väljs genom att trycka på plus/minus-knappen.
Högsta hastighet är 5, lägsta hastighet är 1.
De nedersta funktionerna väljs med knappen “funktionsväljare”.
Vald hastighet
Funktionsväljare
Vald hastighet
Tryck på pil upp/ned tills stolen visas på bilden. Använd
”funktionsväljaren” för att välja den funktion som ska ändras.
Använd joysticken för att ändra t.ex. ryggstödets vinkel.
Inställning av säte, rygg- och benstöd
Funktionsväljare

Service manual P9-0270-S 12 of 78 Version 2.0.2/2012
Medema Production A/S
Function Icon
Seat angle (Tilt)
Backrest angle
Seat height
Left footrest
Right footrest
footrest both
Lying down
Headrest
Only the available options will be displayed.
Funktion Ikon
Lutning
Ryggvinkel
Säteslyft
Vänster
benstöd
Höger
benstöd
Fotstöd båda
Liggande
Nackstöd
Endast de inställningar som är tillgängliga visas.

Service manual P9-0270-S 13 of 78 Version 2.0.2/2012
Medema Production A/S
Light on / off
Push the arrow up / down until the image for light is shown in
the centre.
Push the joystick forward to turn the light on. And again to turn
of the light.
Push the joystick back to activate the hazard warning lights.
Push the joystick back again to turn it of.
Push the joystick right or left to activate the indicators right or
left. Turn of the indicators by puching the joystick to the same
side again.
Press the arrow up / down until the sun i shown i the centre.
Push the joystick forward to enter the settings. Use the Select
button or joystick right / left to change the brightness.
Use Joystick forward / back or arrow up / down to accept the
new settings and return to the main menu.
Setting the Backlight
Tända/släcka belysning
Tryck på pil upp/ned tills ikonen för belysning visas i mitten.
För sedan joysticken framåt för att tända belysningen. För den
framåt igen för att släcka belysningen.
För joysticken bakåt för att slå på varningsblinkers. För den åt
samma håll igen för att stänga av.
För joysticken åt höger eller vänster för att slå på blinkers. För
den åt samma håll igen för att stänga av.
Tryck på pil upp/ned tills solen visas i mitten. För joysticken
framåt för att komma till inställningarna. Använd sedan knappen
”funktionsväljare” eller joysticken åt höger/vänster för att ändra
ljusstyrkan.
Du godkänner det nya värdet och återgår till huvudmenyn
genom att föra joysticken framåt eller bakåt eller trycka på pil
upp/ned.
Inställning av skärmbelysning

Service manual P9-0270-S 14 of 78 Version 2.0.2/2012
Medema Production A/S
Setting the display environment
Use the arrows up /down until “day / night” icon i shown in the
centre. Push the joystick forward to enter settings. The image
below will show.
1 2 3
Setting Result
1 - Indoor The display will show a black background color.
2 - Outdoor The display will show a white background color.
3 - Automatic The background color will change (black/white) accordingly to
the surrounding light.
Use ”Select” or joystick right / left to select setting.
Push the joystick forward to accept the new settings and return
to the main menu.
If you push the Joystick back or use the arrow up / down, the
new setting will be dismissed and you will return to the main
menu.
Exit / Cancel
Exit / Cancel
Inställning av skärmmiljö
Använd pil upp/ned tills ikonen ”dag/natt” visas i mitten. För
joysticken framåt för att välja inställningar. Nedanstående bild
visas.
1 2 3
Inställning Resultat
1 - Inomhus Skärmen har svart bakgrund
2 - Utomhus Skärmen har vit bakgrund
3 - Automatisk Skärmen växlar bakgrundsfärg (svart/vit) beroende på
omgivningens ljus.
Använd ”funktionsväljaren” eller för joysticken åt höger/vänster
för att välja inställning.
Joysticken framåt bekräftar den nya inställningen och återgår till
huvudmenyn.
Joysticken bakåt eller pil upp/ned avbryter och återgår till
huvudmenyn.
Avsluta/Avbryt
Avsluta/Avbryt

Service manual P9-0270-S 15 of 78 Version 2.0.2/2012
Medema Production A/S
Setting the Clock
Use arrow up / down until the clock is shown in the centre. Push
the joystick forward to enter settings. The image below will show.
Press the Select button or push the joystick right / left to choose
the digit to change.
Joystick forward make the number count forward.
Joystick back accept the new settings and return to the main
menu.
Arrow up / down dismiss the new settings and return to the
main menu.
System lock
To lock the DX system
Press the on / off button, for 4 sec. while the system is turned on.
The system will now shut down in locked condition.
Inställning av klockan
Använd pil upp/ned tills klockan visas i mitten. För joysticken
framåt för att välja inställningar. Nedanstående bild visas.
Använd ”funktionsväljaren” eller joystick till höger/vänster för att
välja den siffra som ska ändras.
Joysticken framåt ökar värdet.
Joysticken bakåt bekräftar den nya inställningen och återgår till
huvudmenyn.
Pil upp/ned avbryter och återgår till huvudmenyn.
Systemlås
Låsa DX-systemet
Håll av/på-knappen intryckt i fyra sekunder medan systemet är på.
Då låses systemet.

Service manual P9-0270-S 16 of 78 Version 2.0.2/2012
Medema Production A/S
Error Code
Code Cause Meaning
1 DX Module Could mean:
- Errors in programming
- Error in wire connection
- Internal fault in a module
Turn off the chair and turn on again. If it doesn’t works,
contact qualified technician (HMC or therapist).
2 DX Accessory Could mean:
- driving slowly because of raised seat.
(programming). Not an arror.
Lower the seat as much as possible. If it doesn’t works,
contact qualified technician (HMC or therapist).
3 Motor 1 / L
(M1) Could mean: - Loose connection from the engine to power module
- Short circuit
Check that no plug is loose.
Contact competent technician (HMC or therapist).
4 Motor 2 / L
(M2) Could mean: - Loose connection from the engine to power module
- Short circuit
Check that no plug is loose.
Contact competent technician (HMC or therapist).
5 Parking brake
1 (M1 left) Could mean: - Loose connection
- Short circuit
Check that no plug is loose.
Contact competent technician (HMC or therapist).
6 Parking brake
2 (M2 right) Could mean: - Loose connection
- Short circuit
Check that no plug is loose.
Contact competent technician (HMC or therapist).
To unlock the DX system
Press the on / off button. The system will show a lock in the display.
Press the horn twice within 10 seconds. The system will boot
normally.
Felkoder
Kod Orsak Betydelse
1 DX modulen Kan betyda:
- fel i programmering
- fel i ledningsförbindelsen
- internt fel i en modul
Stäng av stolen och starta den igen. Om det inte
hjälper, kontakta behörig tekniker (HMC eller terapeut).
2 DX tillbehör Kan betyda:
- kör långsamt på grund av upphissat säte
(programmering). Inget fel.
Sänk sätet till det nedersta läget. Om det inte hjälper,
kontakta behörig tekniker (HMC eller terapeut).
3 Motor 1 / L
(M1) Kan betyda: - lös anslutning från motorn till kraftmodulen
- kortslutning
Kontrollera att ingen kontakt har lossnat.
Kontakta en behörig tekniker (HMC eller terapeut).
4 Motor 2 / L
(M2) Kan betyda: - lös anslutning från motorn till kraftmodulen
- kortslutning
Kontrollera att ingen kontakt har lossnat.
Kontakta en behörig tekniker (HMC eller terapeut).
5 Parkerings-
broms 1 (M1
vänster)
Kan betyda:
- lös anslutning
- kortslutning
Kontrollera att ingen kontakt har lossnat.
Kontakta en behörig tekniker (HMC eller terapeut).
6 Parkerings-
broms 2 (M2
höger)
Kan betyda:
- lös anslutning
- kortslutning
Kontrollera att ingen kontakt har lossnat.
Kontakta en behörig tekniker (HMC eller terapeut).
Låsa upp DX-systemet
Tryck på av/på-knappen. Ett lås visas på displayen.
Tryck på tutan två gånger inom tio sekunder. Systemet startar i
normalt läge.

2
4
3
9
10
5
6
1A
3
7
8
1B
2
4
3
10
5
6
1
9
11
7
8
Service manual P9-0270-S 17 of 78 Version 2.0.2/2012
Medema Production A/S
Joystick parts
Dynamic G90T Dynamic G90A
1A Start/stop button (push button) 1 Start/stop button
1B Start/stop button (toggle switch) 2 Display
2 Display 3 Select program
3 Gear down/up 4 Display for seat functions
4 Display for seat functions 5 Battery indicator
5 Battery indicator 6 Magnetic lock
6 Magnetic lock 7 Horn
7 Horn 8 Joystick
8 Joystick 9 Seat function/lights, hazard
warning lights and indicators
9 Seat function/lights, hazard
warning lights and indicators 10 Indicator left/lights
10 Select seat function (toggle
switch) 11 Indicator right/hazard warning lights.

13
3
12
11
10
9
14
1
2
3
4
5
6
7
8
15
5
6
7
8
1
2
3
4
Service manual P9-0270-S 18 of 78 Version 2.0.2/2012
Medema Production A/S
Parts Dolphin and Europe joysticks
Dolphin joystick Europa joystick
1 Battery Indicator 1 Battery Indicator
2 Start/stop button 2 Start/stop button
3 Flash lights (extra equipment) 3 Horn
4 Horn 4 Flash lights / hazard warning
lights.
5 Seat lift 5 Magnetic lock
6 Lights (lights are extra
equipment) 6 Speed / Electrical function (back- / seat functions - in the
form of letters)
A = Tilting seat
B = Electrical back
C = Footrest
D = Footrest
E = Seat lift
L = hazard warning lights (back)
+ Light (forward)
7 Seat Tilt 7 Flash lights / Lights
8 Raise / lower right legrest 8 Joystick
9 Raise / lower left legrest
10 Backrest Adjustment
11 hazard warning lights. (extra
equipment)
12 Speed
13 Green indicator light
14 Magnetic lock
15 Joystick

2
4
3
9
10
5
6
1A
3
7
8
1B
2
4
3
10
5
6
1
9
11
7
8
Service manual P9-0270-S 19 of 78 Version 2.0.2/2012
Medema Production A/S
Using the G90T and G90A
Speed selection with G90T Speed selection with G90A
1 To start the MC Concept:
Press button 1A or use toggle
switch 1B
Wait for the battery indicator to
stabilise (3-5 seconds)
1 To start the MC Concept:
Press button 1 and wait for the
battery indicator to stabilise (3-5
seconds)
2 Select the maximum speed:
Keep pressing button 3 or
toggle switch 10 to change the
numbers between 1, 2, 3, 4 and
5. 1 is the lowest speed and 5
is the highest. (This may vary.
Some scooters have a maximum
speed of 3).
2 Select the maximum speed:
Keep pressing button 3 to
change the numbers between
1, 2, 3, 4 and 5 on the display.
Select the speed you want. 1 is
the lowest speed and 5 is the
highest.
Driving Driving
1 Start driving by moving the
joystick in the direction you want
to travel. The speed depends
on how far forward you push
the joystick. To brake, return the
joystick to the starting position in
the centre.
1 Start driving by moving the
joystick in the direction you want
to travel. The speed depends
on how far forward you push
the joystick. To brake, return the
joystick to the starting position in
the centre.
2 It is important to check the
battery indicator regularly to
prevent the scooter stopping
because of flat batteries.
2 It is important to check the
battery indicator regularly to
prevent the scooter stopping
because of flat batteries.

AB CD E
Service manual P9-0270-S 20 of 78 Version 2.0.2/2012
Medema Production A/S
Selecting seat functions
Selecting seat functions
with the G90T Selecting seat functions with the G90A
A Left footplate A Left footplate
B Seat angle (tilt) B Seat angle (tilt)
C Backrest angle C Backrest angle
D Seat height D Seat height
E Right footrest E Right footrest
If A and E are flashing at the same time, you can operate both footrests at
once. This depends on the programming.