Razor vector User manual

OWNER’S MANUAL
Read and understand this entire manual before using this product!
For assistance contact Razor.
DO NOT RETURN TO STORE.
NOTE: Manual illustrations are for demonstration purposes only.
Illustrations may not reflect exact appearance of actual product.
Specifications subject to change without notice.
Please have your product along with the 19 character product I.D. code with you
before contacting Razor for warranty assistance and/or replacement parts.
Product I.D. Code: _____________ - ____________ - ____________
ELECTRIC SCOOTER

11
CONTENTS
SAFETY WARNINGS
Safety Warnings.............................................................................................1-2
Before You Begin...............................................................................................3
Assembly and Set-Up.................................................................................... 4-5
Charging the Battery.........................................................................................5
Pre-Ride Checklist .............................................................................................6
Usage ..............................................................................................................7-8
Repair and Maintenance..............................................................................8-12
Troubleshooting Guide ....................................................................................13
Vector Parts .....................................................................................................14
Warranty..........................................................................................................15
Contact Information ........................................................................................19
WARNING: Riding a Vector does present potential risks and caution
is required. Like any riding product, a Vector has inherent hazards associated
with its use (for example, falling off or riding it into a hazardous situation). Like
any riding product, the Vector can and is intended to move and it is therefore,
of course, possible to lose control or otherwise get into dangerous situations.
Riders must recognize that if such things occur, a rider can be seriously injured
or die even when using safety equipment and other precautions. RIDE AT YOUR
OWN RISK AND USE COMMON SENSE.
WARNING: Always check and obey any local laws or
regulations which may affect the locations where the Vector may be
used. Keeping away from cars and motor vehicle traffic provides the
highest protection against risk of traffic-related injuries, of course.
For mature riders seeking to operate this product as legally permitted
for commuting applications, the increased risks presented by traffic
certainly emphasizes that the need for caution, personal responsibility
and compliance with local laws is imperative and is the rider’s
responsibility. Only use where allowed and with caution.
WARNING: PARENTAL AND ADULT RESPONSIBILITY AND
SUPERVISION IS NECESSARY TO ASSURE USE BY MATURE RIDERS:
Because products, like the Vector electric scooter, can and do present potential
hazards plainly associated with their use, it is well recognized THE NEED FOR
EXERCISE OF PARENTAL RESPONSIBILITY IN SELECTING RIDING PRODUCTS
APPROPRIATE TO THE AGE OF A CHILD, OR PARENTAL SUPERVISION IN
SITUATIONS IN WHICH CHILDREN OF VARIOUS AGES MAY HAVE ACCESS
TO THE SAME RIDING PRODUCTS, IS IMPORTANT. Not every product is
appropriate for every age or size of child, and different age recommendations
are found within this category of product which are intended to reflect the
nature of the hazards and the expected mental or physical ability, or both, of a
child to cope with the hazards.
WARNING: NOT FOR RIDERS UNDER AGE 18 OR HEAVIER THAN
220 LB (100 KG). DO NOT EXCEED THE WEIGHT LIMIT OF
220 lb (100 kg) – including backpacks and other items that might be carried.
Exceeding the weight limit could injure the rider and damage the
Vector. Rider weight alone also does not necessarily mean a person’s size is
appropriate to fit or maintain control of the Vector. Keep this product away
from small children and remember that this product is not a toy and is intended
for use only by persons who are, at a minimum, completely comfortable and
competent while operating the product.
Razor recommends that children under the age of 18 not be permitted to use
this product. This recommendation is based not just on age or weight or height;
it reflects consideration of expected maturity and skills as well as physical size.
The recommended rider age of 18 years or older is only an estimate and can be
affected by the rider’s size, weight, or skills – not every rider 18 years old or
older will be suited to the product. Certainly, any rider unable to fit comfortably
on the Vector should not attempt to ride it, but a parent’s decision to allow
his or her child to ride this product should be based on the child’s
maturity, skill, and ability to follow rules. Razor emphasizes that
adults are strongly advised not to disregard Razor’s recommendations
or permit younger children to ride the Vector.
Keep this product away from small children and remember that it is
intended for use only by persons who are, at a minimum, completely
comfortable and competent while operating.
Persons with any mental or physical conditions that may make them susceptible
to injury, impair their physical dexterity or mental capabilities to recognize,
understand, and follow safety instructions and to be able to understand
the hazards inherent in the use of any ride-on product, should not use or be
permitted to use products inappropriate for their abilities. Persons with heart
conditions, head, back or neck ailments (or prior surgeries to these areas of the
body), or pregnant women, should be cautioned not to operate such products.
DO NOT EXCEED THE WEIGHT LIMIT OF 220 lb (100 kg). Rider weight
does not necessarily mean a person’s size is appropriate to fit or
maintain control of the Vector.
CHECK AND MAINTAIN PRODUCT CONDITIONS
Before use, check to confirm that covers and guards are in place and in
serviceable condition. Check that the brake and lights are functioning properly,
that the tires are inflated properly and have sufficient tread remaining.
The product should be maintained and repaired in accordance with the
manufacturer’s specifications, using only the manufacturer’s authorized
replacement parts, and should not be modified from the manufacturer’s original
design and configuration.
ACCEPTABLE RIDING PRACTICES AND CONDITIONS
Do not activate the throttle unless you are on the Vector and in a safe, outdoor
environment suitable for riding. Once the throttle is activated the Vector will
move forward.
The normal powered top speed of this product will be approximately
15 mph (24 km/h), which can be affected by conditions, such as rider weight,
inclines and battery charge level. Avoid excessive speeds that can
be associated with downhill rides.
Maintain a hold on the handlebars at all times. Do not touch the brake or motor
on your scooter when in use or immediately after riding, as these parts can
become very hot.
Ride defensively. Watch out for potential obstacles that could catch your wheel
or force you to swerve suddenly or lose control. Be careful to avoid pedestrians,
skaters, skateboards, scooters, bikes, children or animals who may enter your
path, and respect the rights and property of others.
The Vector is intended for use on flat, dry surfaces, such as pavement or level
ground, without loose debris, such as sand, leaves, rocks or gravel. Wet, slick,
bumpy, uneven or rough surfaces may impair traction and contribute to possible
accidents. Do not ride your product in mud, ice, puddles or water. Watch out
for potential obstacles that could catch your wheel or force you to swerve
suddenly or lose control. Avoid sharp bumps, drainage grates, and sudden
surface changes.
Do not attempt or do stunts or tricks. The Vector is not made to withstand
abuse from misuse, such as jumping, curb grinding or any other type of stunts.
Racing, stunt riding, or other maneuvers also enhance risk of loss of control, or
may cause uncontrolled rider actions or reactions.
Never allow more than one person at a time to ride the product.

22
SAFETY WARNINGS
Riding at night or when visibility is limited increases risks of accident or
injury. Should the Vector scooter be ridden in such conditions, use of lights and
additional measures to increase rider visibility and scooter conspicuity
are advised.
Never use near steps or swimming pools.
The Vector electric scooter can operate more quietly than other motorized
products may operate. Use care when in the vicinity of pedestrians or others who
may have difficulty hearing your approach. Use handbell (not included) to sound
warnings when appropriate.
Do not allow hands, feet, hair, body parts, clothing, or similar articles to come in
contact with moving parts or wheels while the motor is engaged.
Do not touch electric motor or brake when in use or immediately
after riding.
Never use headphones or a cell phone to talk or text when riding.
Never ride your product while under the influence of drugs
or alcohol.
Never hitch a ride with a vehicle.
PROPER RIDING ATTIRE
Always wear proper protective equipment, such as an approved safety helmet
(with chin strap securely buckled), elbow pads, and kneepads. A helmet may be
legally required by local law or regulation in your area. A long-sleeved shirt, and
long pants are recommended. Always wear shoes and keep shoelaces tied and
out of the way of the wheels and motor. Never ride barefooted or in sandals.
USING THE CHARGER
The charger supplied with the product should be regularly examined for damage
to the cord, plug, enclosure and other parts. In the event of such damage, the
product must not be charged until the charger has been repaired or replaced.
Use only with the recommended charger.
Use caution when charging.
The charger is not a toy. Charger should be operated by an adult.
Do not operate charger near flammable materials.
Unplug charger and disconnect from product when not in use.
Always disconnect from the charger prior to wiping down and cleaning your
product with damp cloth.
FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS
FURTHER INCREASES RISK OF SERIOUS INJURY. USE AT YOUR OWN
RISK AND WITH APPROPRIATE AND SERIOUS ATTENTION TO SAFE
OPERATION. USE CAUTION.

Charger
(Note: Charger design may
vary from one shown)
3
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
3
BEFORE YOU BEGIN
Remove contents from box. Remove the separators that protect the components from damage during shipping.
Inspect the contents of the box for scratches in the paint, dents that may have occurred during shipping. Because
your scooter was partially assembled and packed at the factory, there should not be any problems, even if the box
has a few scars or dents.
MAKE SURE POWER SWITCH IS TURNED “OFF” BEFORE CONDUCTING ANY ASSEMBLY OR
MAINTENANCE PROCEDURES.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult.
Allow up to 15 minutes for assembly, not including initial charge time.
Allow up to 12 hours for charge (see page 5 for charging information).
WARNING:
DO NOT USE NON-RAZOR PARTS
WITH YOUR RAZOR ELECTRIC
SCOOTER. Razor scooters have
been built to certain Razor design
specifications. The original
equipment supplied at the time
of sale was selected on the basis
of its compatibility with the
frame and all other parts. Certain
aftermarket components may not
be compatible. Use of non-Razor
parts will void the warranty.
Product ID Locations:
(See locations to the left)
1. Handlebar
2. Back of Seat Post
3. Charger
4. UPC Side of Box (Not Shown)
Box Contents:
• Vector
• Charger
• Owner’s Manual
• Allen Wrench
Required Tools
Throttle
Brake Lever
Handlebar Seat
Quick-Release Lever
Pneumatic Tire
Footpegs
1.
2.
Charger Port Kickstand
Pneumatic Tire
Hub Motor
Collar Clamp
Front Fork
5 mm Allen Wrench
(Included)
2.

44
ASSEMBLY AND SET-UP
Attaching the Handlebar
Required Tool: 5 mm Allen Wrench (included)
Attaching the Seat
1 Using a 5 mm Allen wrench, loosen the bolts from the
collar clamp.
1 Open the quick-release lever.
3 With the front wheel pointed straight ahead and the handlebars square to the front wheel, tighten both bolts on
the clamp using a 5 mm Allen wrench. Tighten securely.
Note: The tension of the quick-release lever can be
adjusted by manually tightening or loosening the Allen
bolt. Be careful not to over-tighten. You should always
be able to open and close the quick-release lever by hand
and the seat should slide freely when the quick-release
is open.
2 With a twisting motion, push and twist to slide the
handlebars onto the fork.
2 Insert the seat post. Adjust the seat to the desired
height and close the quick-release lever to lock in place.
Note: The assembly and adjustment should not pass the
vertical safety lines (A).
A

55
CHARGING THE BATTERY
Charger
(Note: Charger design may vary from
one shown)
1Plug the charger plug into wall
outlet. The light on the charger
should be green.
Note: If green light (LED) does not
turn on, try a different outlet.
2Note: Make sure power button is
in the OFF position. Plug the charger
into the charger port. The light on
the charger should turn red during
charging. The light will turn green
again when charging is complete.
Your Vector may not have a fully charged battery; therefore you must charge the battery prior
to use. Be sure to charge the battery in a clean, dry location away from direct sunlight, flames or sparks.
• Initial charge time: 8 hours.
• Recharge time: up to 8 hours, even if the light turns
green. Recommended maximum charging time is
24 hours.
• Always charge the battery immediately after riding.
• Fully charge battery before storing for extended
periods of time.
• Unplug charger from the wall outlet when not in use.
• Failure to recharge battery periodically may result in a
battery that will not accept a charge.
• Make sure the power button is turned OFF when
product is not in use. If the power button is left on for
an extended period of time, the battery may reach a
stage at which it will no longer hold a charge.
• To ensure long battery life, never store the product in
freezing or below freezing temperatures! Freezing will
permanently damage the battery.
• Run time: Up to 55 minutes of continuous ride time.
Run time may vary depending on riding conditions,
rider weight, climate, and/or proper maintenance.
• Constant starting and stopping may shorten ride time.
• Battery life can vary depending on proper
maintenance and usage of the product.
• Do not charge at or below 32°F (0°C).
Charger
WARNING: Use ONLY with
the recommended charger. Batteries
are only to be charged under adult
supervision. The charger is not a
toy. Always disconnect the charger
before wiping down and/or cleaning
the Vector with a damp cloth.
The charger supplied with the
Vector should be regularly examined
for damage to the cord, plug,
enclosure and other parts. In the
event of such damage, the
Vector must not be charged until it
has been repaired or replaced.
Chargers have built-in overcharge
protection to prevent battery from
being overcharged.
Note: If the charger gets warm
during regular use, this is a normal
response and is no cause for
concern. If your charger does not get
warm during use, it does not mean
that it is not working properly.
Wall outlet - Green (stand by)
Wall outlet and unit - Red (charging)
Wall outlet and unit - Green (charged)
Note: Continue charging unit even if
light turns green prior to 8 hours.
WARNING: Battery charge
can deplete over time. Periodically
recharge battery when not in use.
Model Voltage
(Nominal) Vdc
Capacity
(Nominal) Ah
Charge
Temperature Range
Operating
Temperature Range
Vector 36 7.65 0° to 40°C
32° to 104°F
-20° to 60°C
-4° to 140°F
ASSEMBLY AND SET-UP
Inflating the Tires
The tires are inflated when shipped, but they invariably may lose some pressure between the point of manufacturing
and your purchase. Always inflate tires to the correct PSI before first time use.
Lower air pressure can result in a shorter ride time.
Periodically check tires. Reinflate when needed.
1 Remove the valve cap and using a bicycle style tire pump equipped for a Schrader-type valve, inflate the tires to
the correct PSI indicated on the sidewall of the tires. Replace the valve cap.
WARNING: Do not use the
electric scooter for the first time
until you have inflated the tires to
the correct PSI. Failure to do so may
damage your electric scooter and
void your warranty.
WARNING: Do not
overinflate, as this could damage
the tires or wheels.
Note: The pressure air supplies
found at gasoline stations are
designed to inflate high-volume
automobile tires. If you decide to
use such an air supply to inflate your
electric scooter tires, first make sure
the pressure gauge is working, then
use very short bursts to inflate to
the correct PSI. If you inadvertently
overinflate the tires, release the
excess pressure immediately.

66
PRE-RIDE CHECKLIST
Lights
Check the head- and tail-lights for proper function. When
you activate the lights (reference “How to Ride” on page 7
of this manual), the headlight and taillight should illuminate.
Brake
Check the brake and brake lights for proper function. When
you squeeze the brake lever (on handlebar) the brake should
provide positive braking action and tail/brake light should
illuminate. When you apply the brake with the throttle on/
engaged, the brake cut-off switch should cut power to the
motor.
Wheels
Periodically inspect the wheels for excessive wear.
Tires
Periodically inspect the tires for excess wear and replace as
needed. Regularly check the tire pressure and inflate
as needed.
Frame, Fork and Handlebars
Check for cracks or broken connections. Although broken
frames are rare, it is possible for an aggressive rider to run
into a curb or object and wreck, bend or break a frame. Get
in the habit of inspecting your scooter on a regular basis.
Hardware/Loose Parts
Before every ride, check all parts, such as nuts, bolts,
fasteners, etc., to ensure they are secure and assembled
correctly. There should not be any unusual rattles or sounds
from loose parts or broken components. If the product is
damaged, do not ride. Reference “Safety Warnings”
on pages 1 and 2 of this manual.
Safety Gear
Always wear proper protective equipment, such as an approved
safety helmet (with chin strap securely buckled), elbow pads,
and kneepads. A helmet may be legally required by local law or
regulation in your area. A long-sleeved shirt and long pants are
recommended. Always wear shoes and keep shoelaces tied and
out of the way of the wheels and drive system. NEVER RIDE
BAREFOOTED OR IN SANDALS.
Laws and Regulations
Always check and obey any local laws or regulations.
Insurance
Do not assume that your existing insurance policies necessarily
provide coverage for electric product use. Check with your
insurance company for information regarding insurance.
Storage
Prolonged exposure to UV rays, rain and the elements may
damage the enclosure materials, store indoors when not in use.
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.

7
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
USAGE
7
How to Ride
Do not activate the thumb throttle unless you are on the Vector and in a safe, outdoor environment suitable for riding.
Put kickstand up.
Press the power button (A), the LEDs on the battery display will light up. Press the power button (A) for two
seconds to turn the unit off.
Headlight and Taillight: To activate the headlight and taillight the product must be powered ON. Press the power
button (A) once to activate the headlight and taillight. To deactivate the headlight and taillight, press the power
button (A) once again.
Get on the scooter and place both hands on the handlebars. Press down on the thumb throttle (B).
How to Stop
For controlled stops, apply the brake by squeezing the brake lever (on handlebar). Razor recommends that you
practice applying the brake at various speeds and in an open area free from obstructions before riding your scooter
around others.
When the brake is applied the tail/brake light will blink. The brake light is always functional and independent of the
other lights being activated.
Note: The Vector electric scooter features Regenerative Braking. Regenerative braking is a means of recovering
and converting kinetic energy into stored power. Using the scooter’s electric motor, energy that is usually lost
during deceleration and braking is captured and converted back to stored power extending run time and range.
Regenerative braking only recovers a small amount of energy at a time but can be significant over the course of a full
battery cycle. As always specifications and the amount of recovered regeneration varies with rider weight, terrain,
and environmental conditions.
Speed
Mode
Power
Button
Alarm
Battery
Capacity
Speed
B
A
WARNING: The brake is
capable of skidding the rear tire
and throwing an unsuspecting rider.
Practice in an open area free from
obstacles until you are familiar with
the brake function. Avoid skidding to
a stop as this can cause you to lose
control and/or damage the rear tire.
Note: As an additional safety
feature, the scooter is designed to
cut power to the motor when the
brakes are applied.
Note: Practice riding only in wide
open areas clear from curbs,
parking blocks and other obstacles.
Impacting the wheels against
any hard surface can damage the
wheels. Wheels are not covered
under the limited warranty.

88
USAGE
REPAIR AND MAINTENANCE
Note: The Vector display default
setting is in miles. If you would like
to change the display setting to
kilometers, press the power button
(A) three times quickly to select the
kilometers setting.
Changing the Speed Mode
There are two modes for speed. The Vector is set on the Low (12.5 mph (20 km/h)) speed setting at the factory.
Press power button twice quickly to select the speed mode. This icon shows the Low speed mode in white and the
Sport speed mode in red.
1The Low mode max speed is up
to 12.5 mph (20 km/h).
2 The Sport mode max speed is
up to 18 mph (29 km/h) as shown by
an “S” at the top of the display.
Front Wheel Replacement
Required Tools: Two (2) 5 mm Allen Wrenches (one wrench included)
1 Using two (2) 5 mm Allen wrenches, loosen the axle bolt. Remove the
wheel. Note the sequence of the hardware.
2 Install the replacement wheel
and tighten the axle bolt.
Turn power switch “OFF” before beginning repair or maintenance:
• Read the instructions
• Remove charger plug
• Turn the power off
• Secure the product under repair
• Exercise caution around
exposed parts
• Contact Razor customer service
if unsure about any repair or
maintenance
• Repair and maintenance should
be performed by an adult only
White Red

REPAIR AND MAINTENANCE
9
Battery Replacement
Required Tool: Phillips Screwdriver (not included)
1 Using a Phillips screwdriver, remove the three (3) screws on the battery cover. Remove battery cover and set aside.
2 Using a Phillips screwdriver, remove the one (1) screw from the battery bracket.
3 Disconnect the battery cables. Rotate the battery bracket upwards.

10
REPAIR AND MAINTENANCE
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
Battery Replacement Continued
Required Tool: Phillips Screwdriver (not included)
4 Remove the battery and replace with the new battery.
5 Reattach the battery cables. Rotate the battery bracket to its original position.
6 Using a Phillips screwdriver, reattach the one (1) screw to reattach the battery bracket.

REPAIR AND MAINTENANCE
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
11
Battery Replacement Continued
Required Tool: Phillips Screwdriver (not included)
7 Using a Phillips screwdriver, reattach the three (3) screws to reinstall the battery cover.

12
REPAIR AND MAINTENANCE
WARNING: Risk of fire–no user serviceable electrical components.
Cleaning Your Scooter
Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents as they may damage the
surfaces. Do not use alcohol, alcohol-based or ammonia-based cleaners as they may damage or dissolve the plastic
components or soften the decals or decal adhesive.
Battery Care and Disposal
Do not store in freezing or below freezing temperatures. To properly maintain your battery and ensure maximum
battery life, carefully read the “Charging the Battery” section on page 5 of this owner’s manual.
Disposal: Your electric scooter uses a lithium-ion battery pack which must be recycled or disposed of in an
environmentally safe manner. Do not dispose of a battery pack in a fire. The battery pack may explode.
Do not dispose of a battery pack in your regular household trash. The incineration, land filling or mixing of batteries
with household trash is prohibited by law in most areas. Return exhausted batteries to a federal or state approved
lithium-ion battery recycler.
Charger
The charger supplied with the electric scooter should be regularly examined for damage to the cord, plug,
enclosure and other parts and in the event of such damage, the product must not be charged until it has been
repaired or replaced.
Use ONLY with the recommended charger.
Not intended for use at elevations greater than 2000 m above sea level.
Wheels
Wheels and drive system are subject to normal wear and tear. It is the responsibility of the user to periodically
inspect wheels for excess wear and replace hub motor components as required.
Repair Centers
For a list of authorized Razor repair centers:
• Check online at www.razor.com.
• Additional Customer Service contact information is listed on the back of this manual.
CONTAINS LITHIUM-ION BATTERY PACK. BATTERIES MUST BE RECYCLED.
Pb
Pb In the US and Canada only:
For more information regarding
recycling of rechargeable batteries,
call toll free
1-800-822-8837, or visit
http://www.call2recycle.org
Caution: Do not handle damaged
lithium-ion batteries.
Recycling Lithium-ion
Batteries: Lithium-ion batteries are
recyclable. You can help preserve
our environment by returning your
used rechargeable batteries to the
collection and recycling location
nearest you.

1313
TROUBLESHOOTING GUIDE
Problem Possible Cause Solution
Does not work out of the box Undercharged battery Check lights on charger:
Plugged into wall - Green
Plugged into wall & unit - Red (charging)
Plugged into wall & unit - Green (charging complete)
No lights/Blinking lights - Replace charger
No longer works No lights on charger
Undercharged battery
Battery will not hold a charge
Check power to wall outlet and/or try a different outlet.
Check lights on charger:
Plugged into wall - Green
Plugged into wall & unit - Red (charging)
Plugged into wall & unit - Green (charging complete)
No lights/Blinking lights - Replace charger
Replace battery.
Short run time/runs slow Rider’s weight
Riding conditions
Battery not fully charged
Old/damaged battery
Do not exceed 220 lb (100 kg) maximum weight limit.
Use only on flat, dry surfaces. Avoid inclines and areas with
heavy debris.
Charge product - refer to page 5 for charging information.
Replace battery.
Charge battery at least once a month when not in use.
For more troubleshooting tips, a list of available replacement parts or to locate an authorized Service Center in your area,
visit our website at www.razor.com or call toll free [phone] to speak to a live Customer Service Representative.
*Product(s) should be turned OFF and fully charged prior to doing any Troubleshooting.
NOTE: All troubleshooting steps should be performed by an adult only.

19
2
3
18
17
20
12
10
7
6
5
1
11
9
13
16
8
15
14
21
1
4
1414
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
HEADLINEVECTOR PARTS
Keep your electric scooter running for years with genuine Razor parts. Visit our website or e-mail us for more information on spare part availability.
(Specifications subject to change without notice.)
1. Handlebar Grips (Right/Left)
2. Throttle
3. Cyclometer
4. Brake Lever
5. Handlebar
6. Collar Clamp
7. Battery Cover (Right Front)
8. Battery Cover (Right Rear)
9. Headset (Upper/Lower)
10. Front Fender
11. Front Fork
12. Front Wheel Complete
13. Battery Cover (Left)
14. Charger Port
15. Kickstand
16. Control Module
17. Rear Wheel w/Motor Complete
18. Disc Caliper Brake
19. Rear Fender w/Rear Light
20. Battery (36V 7.65Ah)
21. Seat w/Seat Post

15
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
15
WARRANTY
Razor Limited Warranty
The manufacturer warranties this product to be free of manufacturing
defects for a period of 90 days from date of purchase. This Limited Warranty
does not cover normal wear and tear, tire, tube or cables, or any damage,
failure or loss caused by improper assembly, maintenance, storage or use of
the Vector.
This Limited Warranty will be void if the product is ever:
• used in a manner other than for recreation or transportation;
• modified in any way;
• rented.
The manufacturer is not liable for incidental or consequential loss or damage
due directly or indirectly to the use of this product.
Razor does not offer an extended warranty. If you have purchased an
extended warranty, it must be honored by the store at which it was
purchased.
For your records, save your original sales receipt with this manual and write
the serial number below.
__________________________________________
FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications to this unit not expressly approved by Razor USA, could void the user’s authority to operate the equipment.

NOTICE: INSURANCE
YOUR INSURANCE POLICIES MAY NOT PROVIDE COVERAGE FOR
ACCIDENTS INVOLVING THE USE OF THIS SCOOTER/ELECTRIC
RIDE-ON PRODUCT. TO DETERMINE IF COVERAGE IS PROVIDED,
YOU SHOULD CONTACT YOUR INSURANCE COMPANY OR AGENT.

1919
CUSTOMER SERVICE CONTACT INFORMATION
Need Help? Visit our website for product support, a list of authorized service centers in the US and customer service contact information at
www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed below:
AMERICAS
Razor USA LLC
P.O. Box 3610
Cerritos, CA 90703
USA
[phone]
Monday - Friday
8:00 AM - 5:00 PM Pacific Time
[e-mail]
EUROPE, MIDDLE EAST, AFRICA
Razor USA LLC (Europe)
Handelsweg 2
2742 RD Waddinxveen
Netherlands
[phone]
[e-mail]
ASIA
Razor USA LLC (Asia)
P.O. Box 3610
Cerritos, CA 90703
USA
[phone]
[e-mail]
UNITED KINGDOM AND IRELAND
Razor USA LLC (UK)
Unit 20
Hartnoll Business Centre
Post Hill, Tiverton
Devon EX16 4NG
UK
[phone]
[e-mail]
AUSTRALIA AND NEW ZEALAND:
Razor USA LLC
P.O. Box 4280
Auburn South
VIC 3122
Australia
[phone] (AU)
+0 800 003 221 (NZ)
[e-mail]
IMPORTED IN JAPAN BY B-PLUS ASIA
CORP.
Razor USA LLC
Kurokawa 3-1, Asaoku,
Kawasaki, Kanagawa
215-0035 JAPAN
[phone] Tel
[phone] Fax
[e-mail]
Printed in China for Razor USA LLC.
Copyright © 2003-2021 Razor USA, LLC. All rights reserved. Razor®and the Razor logo design are among the registered trademarks of Razor USA LLC in the United States and/or select foreign countries. Vector™and the Vector
logo design are trademarks of Razor USA LLC.
US_210902