Mediroyal NRX Strap Series User manual

NRX® Strap · Wrist Extension Pull
– One strap, unlimited options!
Wrist Extension Pull
Mediroyal Nordic AB · Box 7052 · 192 07 Sollentuna · Sweden · Tel [phone] · [email protected] · www.mediroyal.se
Start by cutting the MCP-strap in the required width,
using the MCP-width on the patient as reference. Cut 3
to 4 oval shaped slids for the fingers. Cut the volar strap
in 30 mm NRX®Strap. Cut the 50 mm anchors in the
NRX®PLUS material. You need 3 wider hook tabs and 2
narrow ones for this application. Apply the strap with the slids over the fingers.
Caring instructions
The NRX®strap can be washed in 40 degrees machine wash with a liquid
detergent. Always use a laundry bag. Remove the hook parts before washing
and let air dry.
Material NRX®Strap Double 110 mm, NRX®Strap 30 mm, NRX®Strap PLUS 50 mm
1 2
© Mediroyal Nordic AB 2018
Secure the flap in the vola with the 30 mm strap with two hook parts.
3

NRX® Strap · Stable Wrist Wrap
Mediroyal Nordic AB · Box 7052 · 192 07 Sollentuna · Sweden · Tel [phone] · [email protected] · www.mediroyal.se
Apply the upper anchor, slide the extension strap under the anchor. Attach the hook part to the end and fold it over the
anchor and secure it.
The extension strap can be tightened further over the upper anchor in order to provide more wrist extension.
The wrist extension strap should now have some tension
to it.
4
7
5
Wrap the 50 mm NRX® Strap around the wrist and
secure it.
6