Mediroyal NRX Strap Series User manual

NRX® Strap · Ankle
– One strap, unlimited options!
NRX®Ankle
Mediroyal Nordic AB · Box 7052 · 192 07 Sollentuna · Sweden · Tel [phone] · [email protected] · www.mediroyal.se
Material NRX®Strap 110 mm and NRX®Strap PLUS 80 mm
Start by cutting the 110 mm NRX®
Strap, the length depends on the
volume of the ankle, usually 45–55
cm is enough. Cut a hole for the heel
on one side and slid the opposite
part. Then cut the reinforcement
from the 80 mm NRX®Strap PLUS.
1
This application is for lateral ankle instabilities. For medial, simple reverse the
application.Attach the loop around the heel and run the strap over the lateral
ligaments. Make sure that the stretch is even. Run the strap over the arch area
and in under the foot.
2
© Mediroyal Nordic AB 2019
Make sure that the strap covers the
lateral part of the foot. If you attach
the support further in the front on
the lateral part you will get more
lateral stability. Position the foot in
dorsiflexion and use the first strap to
elevate the foot.
Run the strap around the ankle and
attach it on the medial side with the
hook.
Run the second strap the same way
as the first strap, adding more
compression to the lateral side.
Secure the strap on the upper side
with the hook.
345

NRX® Strap · Ankle
Mediroyal Nordic AB · Box 7052 · 192 07 Sollentuna · Sweden · Tel [phone] · [email protected] · www.mediroyal.se
Attach the NRX®Strap PLUS on the
lateral side with a larger hook part.
Make sure that the angle is adjusted
to the compression in both of the
straps are even.
Dorsiflex the foot and attach the
first strap on the medial side of the
ankle. Then attach the second strap
from behind.
You might have to adjust the
reinforcement to find the right
individual support.
678
Caring instructions
The NRX®strap can be washed in 40 degrees machine wash with a liquid
detergent. Always use a laundry bag. Remove the hook parts before washing
and let air dry.
© Mediroyal Nordic AB 2019