Mediroyal NRX Strap 110 User manual

NRX® Strap · Knee Ligament
– One strap, unlimited options!
NRX®Knee Ligament
Mediroyal Nordic AB · Box 7052 · 192 07 Sollentuna · Sweden · Tel [phone] · [email protected] · www.mediroyal.se
Material NRX®Strap 110 mm, NRX®Strap PLUS 50 mm or 80 mm
Cut a thigh- and calf anchor from
the 110 mm NRX®Strap. Attach one
hook piece onto one of the sides.
Then cut two side wraps that should
be equally long and with a width
of 80–90 mm from NRX®Strap
110 mm. The alternative could be
to use the NRX®Strap PLUS in 80
mm for more stability. Attach hook
tabs to each end. Then last cut two
reinforcement straps from 50 mm
NRX®Strap PLUS and attach hooks
on each end.
1
Apply the thigh and calf anchors with some compression and fixate them with
the hook tabs.
2
© Mediroyal Nordic AB 2019
Attach the first side wrap onto the backside of the medial part of the calf anchor. Pull the strap externally with an even
tension wrapping the strap just under the patella, covering the lateral collateral ligament and attach it on the lateral side of
the thigh anchor.
3

NRX® Strap · Knee Ligament
Mediroyal Nordic AB · Box 7052 · 192 07 Sollentuna · Sweden · Tel [phone] · [email protected] · www.mediroyal.se
Now attach the second side wrap
to the back side of the lateral calf
anchor. Pull the strap just under the
patella, covering the medial collateral
ligament and attach the tab on the
medial part of the thigh anchor.
Attach the first reinforcement strap
on the lateral part of the calf anchor.
Run it over the area of the side
wrap and attach it on the medial
side of the thigh anchor. You might
have to adjust the tension in the
strap depending in what degree of
flexion/extension the exact support is
needed. That has to be tested indivi-
dually. You might run both reinfor-
cement straps the same way in order
to provide more force or alternate
with a strap on the opposite side.
You might have to alternate the
strapping in order to reach the exact
stability that your patient need.
Sometimes NRX®Strap PLUS can
be more effective as anchors due to
the higher compression. Start with
the regular NRX®Strap for your first
application and then upgrade the
application if needed.
456
Caring instructions
The NRX®strap can be washed in 40 degrees machine wash with a liquid
detergent. Always use a laundry bag. Remove the hook parts before washing
and let air dry.
© Mediroyal Nordic AB 2019