MEE AUDIO CONNECT AF-T1B User manual

Model: AF-T1B
HD WIRELESS SOUND FOR YOUR HDTV
QUICKSTART GUIDE
www.MEEaudio.com/Connect
universal dual bluetooth
wireless audio transmitter
For Headphones and Speakers
Visit MEEaudio.com/ConnectHelp for
easy-to-follow setup videos, full user manuals,
and the latest troubleshooting information.
CONNECT SUPPORT GUIDE

PACKAGE CONTENTS
CONNECT
Bluetooth
Transmitter
TOSLINK digital
optical S/PDIF
audio cable
3.5mm to
RCA
adapter
Micro-USB
charging
cable
3.5mm
audio
cable

AOFF ON AOFF ON
1
CONNECT
POWER ON TRANSMITTER
PLUG IN USB POWER CABLE
plug into AC
adapter, TV,
or computer
USB port
AOFF ON

2
PAIR A BLUETOOTH HEADPHONE OR SPEAKER
Put your headphone or
speaker in pairing mode*
Tap pairing button “A”
on the Connect.
Once the Connect and your device are
both in pairing mode simultaneously
and within 3 ft (1m) of each other, they
will be paired.
B
CONNECTED: SOLID LIGHT
B
AOFF ON
TAP
PAIRING: LIGHT BLINKS
*CONSULT THE USER MANUAL OF YOUR DEVICE IF YOU
ARE NOT SURE HOW TO PUT IT IN PAIRING MODE
NOTE: SOUND MAY BE QUIET OR INTERMITTENT
WHILE PAIRING IS IN PROGRESS.

*CONSULT THE USER MANUAL OF YOUR DEVICE IF YOU
ARE NOT SURE HOW TO PUT IT IN PAIRING MODE
3
PAIR A 2ND HEADPHONE
OR SPEAKER (OPTIONAL)
A second Bluetooth audio
device can be paired after
one is already connected.
To pair the second device, put it in
pairing mode*, then tap pairing button
“B” on the Connect.
NOTE: SOUND MAY BE QUIET OR INTERMITTENT
WHILE PAIRING IS IN PROGRESS.
BTAP
A B
B
CONNECTED: SOLID LIGHT
B
PAIRING: LIGHT BLINKS
Once the Connect and your device are
both in pairing mode simultaneously
and within 3 ft (1m) of each other, they
will be paired.

4. choose an audio cable supported by your tv
OPTICAL S/PDIF [DIGITAL]
AOFF ON
settings
Sound / Audio
digital Audio Output
auto
dolby digital
pcm / stereo
DTS
AUDIO OUPUT
R L
OPTICAL
IF TV AUDIO PLAYS FROM HEADPHONE,
SETUP IS COMPLETE. PROCEED TO STEP 5.
NO SOUND? CHECK TV SETTINGS MENU.†
PROCEED TO STEP 5
remove
protective
caps
select “PCM / Stereo” in the audio
output settings menu** of your TV
**if sound is still not audible, select “PCM / Stereo” in the audio output
settings menu(s) of your video streaming app(s) and/or device(s)
AUDIO OUPUT
OPTICAL
plug the
optical cable
into TV’s digital
audio output
†
EXACT MENU AND ITEM NAMES MAY VARY BETWEEN TVS

RCA
PROCEED TO STEP 5
set TV’s internal
speakers to
“OFF”
select “Variable”
in the audio
output settings
menu of your TV
AOFF ON
AUDIO OUPUT
R L
OPTICAL
IF TV AUDIO PLAYS FROM HEADPHONE,
SETUP IS COMPLETE. PROCEED TO STEP 5.
NO SOUND? CHECK TV SETTINGS MENU.†
AUDIO OUTPUT
R L
connect the
stereo cable to RCA
adapter and plug
into TV’s red/white
RCA jacks labeled
“AUDIO OUT”
settings
sound / audio
Analog audio out
fixed
variable
settings
sound / audio
tv speakers
on
off
4. choose an audio cable supported by your tv
†
EXACT MENU AND ITEM NAMES MAY VARY BETWEEN TVS

4. choose an audio cable supported by your tv
3.5MM [HEADPHONE JACK]
Volume max vol+
AOFF ON
plug the stereo
cable into TV’s
headphone jack
headphone jack may
be located on front,
side, or rear of TV
AUDIO
maximize the
volume on
your TV

5
ADJUSTING HEADPHONE VOLUME
WHEN FINISHED, POWER OFF HEADPHONES UNTIL NEXT USE
Volume can
be individually
adjusted on each
headphone or
speaker paired
with the Connect.
SUBSEQUENT USE
To reconnect a previously paired headphone or speaker,
power on the Connect first (if powered off) and then power on
the headphone or speaker. A solid blue light on the Connect
will indicate that a connection has been established. It may
take up to 60 seconds for audio transmission to begin.

The status of the Connect is shown by a green power /
charging indicator light on the rear of the unit and two blue
indicator lights on the top as follows:
INDICATOR LIGHT (S)
USB Power plugged in,
green power indicator light on
USB Power plugged in,
green power indicator
light pulsing slowly
USB Power not plugged in,
green power indicator light on
USB Power not plugged in,
green power indicator
light blinking rapidly
Blue light blinking
One solid blue light
Two solid blue lights
CONNECT STATUS
Battery full
Charging
Powered on
Low battery
Pairing mode active
One Bluetooth
device is connected
Two Bluetooth
devices are connected
LED INDICATOR LIGHTS

MEE audio products purchased from authorized resellers
are covered by a 1-year manufacturer warranty.
Please retain a copy of your receipt as proof of purchase.
For more information,
visit www.MEEaudio.com/Support
WARRANTY
To perform a factory reset of the Connect, hold pairing
button “A” for approximately 5 seconds until the blue
indicator light stops blinking. All previously paired devices
will be cleared from memory and a new pairing will need
to be created by following the procedure in STEP .
FACTORY RESET / CLEAR MEMORY
2

Battery performance will be severely decreased when
stored in extreme temperatures: below -10°C/14°F or
above 45°C/113°F including direct sunlight.
The lifetime of the battery will be significantly reduced
if your device is not charged for a long time. It is
recommended to charge your device at least
once a month.
Clean with a soft, slightly damp cloth. Do not use
chemical cleaners.
There are no user replaceable/reparable parts in this
device. Disassembling it will void your warranty.
Do not expose the device to liquids. If the device
comes in contact with liquids, quickly wipe away.
If submersed in water, do not turn the device on until
completely dried.
Note: liquid submersion voids the warranty.
Do not use around flammable gasses as fire or
explosion may occur
•
•
•
•
•
•
SAFETY AND CARE

Using headphones at high to moderate volumes for
extended periods of time will result in permanent
hearing damage. It is advised you keep volume
levels moderate to low at all times for your safety.
Do not use while driving a car, cycling, operating
machinery, or performing other activities that
require hearing surrounding sounds.
Keep the device and packaging out of reach of
children.
WARNING

QUESTIONS?
WE’RE HERE TO HELP!
Phone Support: 626-965-1008 x31
Monday ~ Friday 9am to 5:30pm PST
Email Support: [email protected]
All emails are responded to within 2 business days

MEE audio and its logo are registered trademarks of
S2E, Inc. All rights reserved.
The Bluetooth®word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by MEE audio is under license. Other
trademarks and trade names are those of their respective
owners.
Qualcomm®aptX™ is a product of Qualcomm
Technologies International, Ltd. Qualcomm is a trademark
of Qualcomm Incorporated, registered in the United States
and other countries, used with permission. aptX is a
trademark of Qualcomm Technologies International, Ltd.,
registered in the United States and other countries, used
with permission.