Mega Cocina MEGASWIRL User manual

®
Top Mop Pole
Bottom Mop Pole
Bucket Handle
Dispenser
Mop Dryer
Mop Washer
Switch
Mop Disc
Mop Head
Pivot Joint
Wash Cars Every Floor
Surface
Glass & Windows Bathrooms Dusting
Fast Water
Release Valve
Easy to move
in every direction
with removable wheels
Built-in Dispenser
Best Way to Clean - Hands Free / Hygenic
MEGA SWIRL MOPTM
Best Way to Clean - Hands Free / Hygenic
MEGA SWIRL MOPTM
Best Way to Clean - Hands Free / Hygenic
MEGA SWIRL MOPTM
Best Way to Clean - Hands Free / Hygenic
MEGA SWIRL MOPTM
ADVISORY
Children should be supervised when
using the MEGA SWIRL MOPTM.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
Easy
Release
Valve
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
MOP
MEGASWIRLTM MOP MEGASWIRLTM
MOP
MEGASWIRLTM MOP
MEGASWIRLTM
MOP
MEGASWIRLTM
MOP
MEGASWIRLTM
MOP
MEGASWIRLTM
ADVISORY
Children should be supervised when
using the TM.
IMPORTANT:
Mop in Close position to mop/clean
Mop in Open position to spin

®
Top Mop Pole
Bottom Mop Pole
Bucket Handle
Dispenser
Mop Dryer
Mop Washer
Switch
Mop Disc
Mop Head
Pivot Joint
Wash Cars Every Floor
Surface
Glass & Windows Bathrooms Dusting
Fast Water
Release Valve
Easy to move
in every direction
with removable wheels
Built-in Dispenser
Best Way to Clean - Hands Free / Hygenic
MEGA SWIRL MOPTM
Best Way to Clean - Hands Free / Hygenic
MEGA SWIRL MOPTM
Best Way to Clean - Hands Free / Hygenic
MEGA SWIRL MOPTM
Best Way to Clean - Hands Free / Hygenic
MEGA SWIRL MOPTM
ADVISORY
Children should be supervised when
using the MEGA SWIRL MOPTM.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
Easy
Release
Valve
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
MOP
MEGASWIRLTM MOP MEGASWIRLTM
MOP
MEGASWIRLTM MOP
MEGASWIRLTM
MOP
MEGASWIRLTM
MOP
MEGASWIRLTM
MOP
MEGASWIRLTM
ADVISORY
Children should be supervised when
using the TM.
IMPORTANT:
Mop in Close position to mop/clean
Mop in Open position to spin

®
Top Mop Pole
Bottom Mop Pole
Bucket Handle
Dispenser
Mop Dryer
Mop Washer
Switch
Mop Disc
Mop Head
Pivot Joint
Wash Cars Every Floor
Surface
Glass & Windows Bathrooms Dusting
Fast Water
Release Valve
Easy to move
in every direction
with removable wheels
Built-in Dispenser
Best Way to Clean - Hands Free / Hygenic
MEGA SWIRL MOPTM
Best Way to Clean - Hands Free / Hygenic
MEGA SWIRL MOPTM
Best Way to Clean - Hands Free / Hygenic
MEGA SWIRL MOPTM
Best Way to Clean - Hands Free / Hygenic
MEGA SWIRL MOPTM
ADVISORY
Children should be supervised when
using the MEGA SWIRL MOPTM.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
Easy
Release
Valve
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
MOP
MEGASWIRLTM MOP MEGASWIRLTM
MOP
MEGASWIRLTM MOP
MEGASWIRLTM
MOP
MEGASWIRLTM
MOP
MEGASWIRLTM
MOP
MEGASWIRLTM
ADVISORY
Children should be supervised when
using the TM.
IMPORTANT:
Mop in Close position to mop/clean
Mop in Open position to spin

®
Top Mop Pole
Bottom Mop Pole
Bucket Handle
Dispenser
Mop Dryer
Mop Washer
Switch
Mop Disc
Mop Head
Pivot Joint
Wash Cars Every Floor
Surface
Glass & Windows Bathrooms Dusting
Fast Water
Release Valve
Easy to move
in every direction
with removable wheels
Built-in Dispenser
Best Way to Clean - Hands Free / Hygenic
MEGA SWIRL MOPTM
Best Way to Clean - Hands Free / Hygenic
MEGA SWIRL MOPTM
Best Way to Clean - Hands Free / Hygenic
MEGA SWIRL MOPTM
Best Way to Clean - Hands Free / Hygenic
MEGA SWIRL MOPTM
ADVISORY
Children should be supervised when
using the MEGA SWIRL MOPTM.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
Easy
Release
Valve
1. ASSEMBLING HANDLE:
Connect the 2 handle
poles together one by one,
connect to mop head, place
mop disk flat on ground and
position over pivot joint and
insert pole and pull up. Make
sure all parts attach securely.
4. REMOVING THE
MOP HEAD: Place your
foot on the mop strands,
hold the handle upright
to remove it from
the mop head.
7. MOP WASHER:
Decreases physical efforts
of wringing water from
mop head.
8. WHEELS: 360° rotating
wheels makes your
cleaning easier to
manuever bucket.
9. WATER RELEASE:
The easy release valve is
designed to allow water to be
released faster.
SOAP DISPENSER:
Makes cleaning easier.
5. MAXIMUM WATER:
LEVEL: Don’t pour
water over the level
mark. This will keep the
water from overflowing.
6. DRYING: Insert the mop
head into the spin basket
dryer completely. This will
ensure proper drying.
2. ASSEMBLING MOP HEAD:
Place the mop head on the
ground, step on the disk,
the mop head is attached
when you hear a “click”.
3. SWITCH: When drying
turn switch to on. This
will allow the mop
head to spin. When
cleaning turn switch to
off. This locks the handle
to clean.
MOP
MEGASWIRLTM MOP MEGASWIRLTM
MOP
MEGASWIRLTM MOP
MEGASWIRLTM
MOP
MEGASWIRLTM
MOP
MEGASWIRLTM
MOP
MEGASWIRLTM
ADVISORY
Children should be supervised when
using the TM.
IMPORTANT:
Mop in Close position to mop/clean
Mop in Open position to spin