Tempo di saldi Spinscrubber User manual

U S E A N D M A I N T E N A N C E M A N U A L

R o t a t i n g e l e c t r i c b r u s h - c o d . S P I N S C R U B B E R

Tempo Di Saldi S.r.l.s

Headquarters: via Torre Dentice, D1 - 80016 - Marano di Napoli (NA)

E-mail: tempodisaldi@hotmail.com

This manual contains proprietary information and cannot be partially provided to third parties for any use and in any form, without the prior written

consent of Tempo di Saldi Srls. Tempo di Saldi Srls declares that the information contained in this document is consistent with the technical

specifications of the device to which the manual refers. A certified copy of this document is deposited in the technical file of the product, kept at the

headquarters of Tempo di Saldi Srls which does not recognize any documentation that has not been produced, issued or distributed by itself or by its

authorized representative.

This manual, as well as the entire technical file, will be kept by the manufacturer for the period required by law. During this period, a copy of the

documentation accompanying the product may be requested at the time of sale. The entire technical file remains available for this period exclusively

for the control authorities, who may request a copy. After this period, it will be the obligation and care of whoever manages the product to make sure

that both the product and the documentation comply with the laws in force at the time of the inspection.

Use and maintenance manual

page 2

Before using the device, check the presence of the declaration of conformity.

QIf the device is transferred to third parties, all documentation must be delivered together with it.

Upon receipt of the device, before carrying out any operation, read this manual carefully.

If part of the documentation is even partially missing or illegible, consult Tempo di Saldi Srls before carrying out any further operation

on the device.

In case the external structure of the device if there are sharp edges or edges following an accidental impact, such as to make it

dangerous, it is necessary to contact the authorized service and follow their instructions.

If you find any deformation, cracks of any kind on the power supply, do not use it. Contact technical assistance or dispose of it.

Keep out of the reach of children, it is not a toy.

Do not wet the electrical contacts inside the device with water or other liquids.

It is necessary to carry out the maintenance described in the manual.

Maintenance must be done following the instructions in the manual.

Disconnect the device from the power supply before carrying out any cleaning or maintenance operations.

Guarantee:the warranty rules, listed in full in the purchase contract, are valid only if the device is used under the conditions of use envisaged. With

the exception of the cleaning operations described in section MAINTENANCE and carried out with the indicated procedures, any repairs and / or

modifications made to the device by companies other than the manufacturer will invalidate the guarantee. The warranty does not extend to damage

caused by inexperience or negligence in the use of the device or omitted maintenance.

The products we sell are covered by a guarantee with regard to the following conditions:

The warranty is valid for a period of 12/24 months depending on the legal nature of the buyer.

The manufacturing company undertakes to replace incorrectly manufactured products at its own discretion, only after careful control and verification of bad construction.

The transport and / or shipping costs in case of incorrect use of the guarantee are always borne by the buyer.

During the warranty period, the replaced products become the property of the manufacturer.

Only the original purchaser who has complied with the instructions for normal use, cleaning and storage contained in the manual can benefit from this guarantee. Our warranty liability

expires when: the original owner transfers ownership of the product, or changes have been made to the product.

The guarantee does not cover damage resulting from excessive stress such as using the product after a fault has been detected, the use of unsuitable methods of operation and failure to

observe the instructions for use.

The manufacturer assumes no responsibility for any difficulties that may arise in resale or use abroad due to the provisions in force in the country where the product was sold.

The defective product must be delivered to the manufacturer for replacement; otherwise the replaced part will be charged to the buyer.

The guarantee does not cover damage to the product resulting from wear and tear and depending on the type of material and specific use.

NOTICE. If it is deemed necessary to use the guarantee, please indicate the following data:

Typology

Purchase date (presentation of the purchase document)

Detailed description of the problem

NOTE: failure to comply with the methods of use of the product described in this documentation will result in the forfeiture of the warranty terms.

Product description and intended use:

Rotating electric brush up to about 300 revolutions per minute, removes stains, cleans everywhere, avoids back pain, knee pain or other problems,

because with 3 different brushes you can clean anywhere, there is the narrow and small cone brush ideal for crepe, the standard brush for the shower,

sink or cups and finally the flat brush ideal for floors or walls.

Main arm

Upper hook for extension Arm

On / Off button

Rotating Head

Battery Charger Compartment Cover

Battery charger

Battery charger compartment

360 ° brush

Lower hook for extension Arm

Flat Brush

Extendable Arm

Corner Brush

Product technical data:

Use and maintenance manual

page 3

Description

Values

Rpm

300

Arm Length

105

Battery Life

50 minutes

Charger

Included from 8V

Brushes

3 types

Color

Blue and White

NOTE: since it would be impossible to describe all the operations that must not or cannot be performed, it is considered that all the operations

(other than normal use) that are not explicitly described in the manual supplied with the device, are to be considered not feasible.

ATTENTION: it is absolutely forbidden:

•Use of the device with irrelevant power supply lines and in non-compliant electrical systems.

•Change the components of the device (eg remove the metal shell).

The reuse of any unit after decommissioning the device releases the manufacturer from any liability arising from the use of the unit.

Residual risks:

It is important that any user who has to use and maintain the device has read the manual beforehand.

the manufacturer cannot in any case be held liable for accidents or damage resulting from unforeseen use of the device as a result of

negligence on the part of a user.

It is absolutely forbidden to make any changes to the device. Any damage to people, animals or things deriving from the use of the device

modified improperly by an unauthorized operator relieves the manufacturer of any responsibility.

ccheck the integrity of the device upon receipt. If you find any damage, lack, deformation or traces of impacts due to transport, notify the

manufacturer before proceeding with the following operations.

when handling the device, place be careful and do not slam it and make it collide with other objects that could damage or break it. Handle

it with care.

Before connecting the power to the device and put it into operation, completely remove any dust or moisture and any packaging materials.

If any damage is found, stop the configuration procedure and report the nature of the damage to the manufacturer's customer support

office.

Pictograms:

the device contains the following pictogram intended to warn users about the danger of electrocution.

Unpacking: the device is supplied inside a plastic and cardboard packaging to preserve its characteristics during the phases of

storage and transport. Despite this, it must be handled with care, to prevent it from breaking or being damaged. After removing

the packaging, dispose of it and never make it available to children

Locations:

•The position must be chosen so that it cannot be hit by jets of steam, water and corrosive liquids.

•The temperature of the environment of use must be between the values of + 35 ° C and 5 ° C.

•The storage environment temperature between the values of + 50 ° C and 0 ° C.

•Humidity conditions between 0% and 80% non-condensing.

•After having been connected to the electrical system and to the device from the power supply, it is necessary to close the power supply

on contact by inserting it, for example, in an electrical box with a closing lid.

•It must never be placed near plastic and flammable materials.

It can only be used in domestic and / or professional environments respecting the factors just indicated. Use indoors.

Configuration and use:

-At first use it is advisable to keep the product in charge for at least 20 hours

-Assemble the product and adjust to the desired length

-Connect the brush between the 3 supplied

-At the end of use, disassemble the product and if necessary put it in charge

ATTENTION

Before using the device in any form, the user must have read the entire manual and understood the instructions.

Use and maintenance manual

page 4

The manufacturer cannot be held responsible in any case for accidents or damage resulting from the inappropriate use of the device, as well as

for the non-observance, even partial, of the safety rules and intervention procedures described in the document.

Handle with care and never carry out the connection and disconnection operations with wet hands and / or bare feet.

Do not squeeze, do not place weights on top of the power supply.

The connection of the power supply must always be carried out with the power supply disconnected.

The connection of the product to the power supply system and to the products to be powered must be carried out by professional electricians

and / or by persons with skills in the electrical and electronic sector. Damage to persons and / or to the product following an incorrect

connection of the same, are not attributable to the manufacturer.

An electric shock can be fatal, to avoid electric shock when installing and using the device:

- Do not touch any exposed cables inside the device or connected directly to it

- Do not short-circuit the device cables.

Never obstruct the metal grid of the power supply, which is necessary to prevent it from overheating.

Make sure that the power supply to which the device will be connected is disconnected.

Before connecting the power supply to a device, check the amount of power needed to power it and the supply voltage.

Insert the cables of the devices to be powered in the “Output cables” slots. Secure the cables with the locking screw

Connect the power supply to the electrical system by inserting the cables into the “Cables in” housings, paying attention to their order

(phase, neutral and earth).

Place the power supply inside a standard electrical box, away from other appliances and / or sensitive products and close it so that it is

never accessible.

Power up the electricity grid. The power supply does not require any other use procedures.

Maintenance warnings: the operations maintenance must be carried out by personnel who have previously read the manual.

Any kind of physical intervention must always be done withthe device disconnected from the power source. When carrying out these operations,

strictly follow the instructions given in this manual.

For any maintenance and cleaning operations, in addition to the instructions contained in this manual, the regulations of general safety and, if

applicable, the general workplace safety regulations in force in the place where these operations are carried out.

ATTENTION

Maintenance operations must be carried out with the mains system disconnected

Maintenance: periodically it is necessary to clean the device from any accumulationof dust and other dirt that may have formed and / or deposited

on its external surface. If necessary, use a soft bristle brush to remove dust. A jet of compressed air can also be used.

Decommissioning and deactivating the device: the deviceit is produced and built according to criteria of sturdiness, durability and flexibility that

allow it to be used for many years. Once it has reached the end of its technical and operational life, it must be put out of service in conditions where

it can no longer be used for the purposes for which it was designed and built at the time, making it possible to reuse the raw materials that constitute

it. .

NOTE: the manufacturer assumes no responsibility for damage to persons or property resulting from the reuse of individual parts of the device for

functions other than the original ones. The manufacturer rejects any acknowledgment, implicit or explicit, of suitability for specific purposes of parts

of the device reused after its definitive deactivation with a view to its disposal.

Disposal: lThe possibility of reusing some parts of the device is subject to the total responsibility of the user.

The system label shows the symbol indicated in Legislative Decree no.49 of 14 March 2014 which transposes directive 2012/19 / EU, which indicates

the need to dispose of the product and its components in separate waste, specifically in electrical and electronic waste. Contact the waste collection

center in your area for more details.