Melbourne Hawthorn User guide

1
HAWTHORN CHRONOGRAPH
Owner’sHandbOOk

Thank you for purchasing your Melbourne Watch Company mepiece.
Since our establishment in 2013, we have strived to create mepieces of the
highest quality that you as an owner can be proud of wearing.
Each MWC mepiece represents a new stage in our journey as a brand as we
connue to grow – A journey that we are glad to have you on board for.
WELCOME TO OUR JOURNEY…
Sujain Krishnan
Managing Director, Founder
CONTENTS
Model Specicaons 3
Operang Instrucons 5
Warranty & Support 7
Stay In Touch 9

3
The Hawthorn oers a blend of dress and sports styling combined with a
modern Japanese mecha-quartz chronograph movement.
The Seiko Cal. VK63 movement allows for the grab-and-go convenience and
precise mekeeping of quartz as well as the feel of a mechanical chronograph
(with a 5bps sweep chrono hand).
The Hawthorn also features sapphire crystal and a matching solid stainless
steel bracelet.
HAWTHORN CHRONOGRAPH
TECHNICAL SPECIFICATIONS
Case Material: 316L Stainless Steel
Case Diameter: 42mm
Case Thickness: 11mm
Lug Width: 22mm
Movement: Seiko Cal. VK63 (Japan)
Baery Life: 3 years (standard)
Complicaons: 12/24 Hour Time, Chronograph
Crystal: Flat An-Reecve Sapphire
Water Resistance: 50m/5ATM
Strap: Steel Bracelet – 22mm

5
OPERATING INSTRUCTIONS
Your Hawtorn mepiece is ed with the Seiko Cal. VK63 mecha-quartz
chronograph movement. An overview of funconality is shown below:
A. When parally pulled out,
the crown can be rotated
clockwise to quick-set the
date.
B. When fully pulled out, the
crown can be rotated to
adjust the me. This also
places the watch into baery
saving mode.
C. The top pusher buon stops
and starts the chronograph
mer
D. The boom pusher buon
resets the chronograph mer
E. The central seconds hand
will operate as a stop-watch
seconds counter when in
operaon. By default, the
chrono seconds hand will
remain stopped at the 12
o’clock posion
F. Chrono minute totaliser
G. 24 Hour Time
Notes:
1. The Hawthorn has a screw-down crown.
To release the crown, unscrew it counter-
clockwise. To re-set, apply light pressure against
the crown while rotang clockwise.
2. DO NOT reset the chronograph seconds hand
while the stopwatch funcon is running as this
may cause damage to the mechanism.
3. The chronograph funcon can only count a
maximum of 60 minutes per cycle. Aer this,
it will stop.

7
WARRANTY & SUPPORT
Your 2 year warranty covers material producon defects concerning the watch,
strap and movement. It does not cover damage caused through misuse/
physical force, or normal wear and tear.
If you have an issue with your mepiece, please ensure you contact our
customer service team prior to aempng any course of repair on your own, as
dong so will render your warranty void.
To lodge a support request, please email your details along with a descripon
of the issue to [email protected]om.au
This will create a support cket within our helpdesk system and you will
receive an automated email conrming receipt of your request, along with a
case number which you can refer to during further correspondence.
For more informaon, or general enquiries, please refer to our website:
www.melbournewatch.com.au/pages/contact

9
STAY IN TOUCH
If you would like to keep up to date on our latest news and new model
developments, you can subscribe to our newsleer on our website or follow us
on social media.
facebook.com/melbournewatchcompany
@melbournewatch #melbournewatch
pinterest.com/melbournewatch

W: melbournewatch.com.au
E: [email protected]