Melbourne SORRENTO AUTOMATIC User guide

1
SORRENTO AUTOMATIC
Owner’sHandbOOk

Thank you for purchasing your Melbourne Watch Company timepiece.
Since our establishment in 2013, we have strived to create timepieces of the
highest quality that you as an owner can be proud of wearing.
Each MWC timepiece represents a new stage in our journey as a brand as
we continue to evolve and grow – A journey that we are glad to have you on
board for.
WELCOME TO OUR JOURNEY…
Sujain Krishnan
Managing Director, Founder
CONTENTS
Model Specifications 3
Operating Instructions 5
Steel Bracelet Adjustment 7
Customer Support 9

3
Dive meets dress with our Sorrento collection, combining the multi-layered
ceramic dial construction of the Portsea collection with a rugged dive
watch case and a unique double layered engraved bezel.
The Sorrento also features 20ATM water resistance, Japanese super-lume
and a solid steel bracelet with quick-release end-links.
SORRENTO AUTOMATIC
TECHNICAL SPECIFICATIONS
Case Material: 316L Stainless Steel
Case Diameter: 42mm
Case Thickness: 14mm
Lug Width: 22mm
Movement: Sellita Cal. SW200 Automatic
Power Reserve: 40 Hours Maximum
Beat Rate: 28,800bph
Functions: 12-Hour Time, Date, Dive Bezel
Crystal: Flat Anti-Reflective Sapphire
Water Resistance: 200m/20ATM
Strap: 316L Bracelet

5
OPERATING INSTRUCTIONS
Your Sorrento timepiece is fitted with the Sellita SW-200 (Swiss Made) high-
beat automatic movement.
The crown may be placed in 3 positions as per the image below and must
be unscrewed prior to time adjustment.
A. Fully pushed in – when in
this position, the crown
can be rotated clockwise
to manually wind the
movement after being
unscrewed
B. Partially pulled out – The
middle crown position
allows for the date to be
adjusted by clockwise
rotation.
C. Fully pulled out – when
in this position, the
crown can be rotated in
both directions to set
the time.
Notes:
1. To unscrew the crown, rotate it counter-
clockwise.
2. To screw in the crown, apply pressure
towards the case and rotate it clock-wise
3. Do not manually adjust the date during the
automatic change-over action as this may
damage the gearing in the mechanism

7
STEEL BRACELET ADJUSTMENT
The Sorrento comes with a steel bracelet that may be adjusted in two ways,
as per the instructions below.
1. Each side of the bracelet has links which may be removed using a
jeweller’s screwdriver. We advise performing link removal first prior to
any micro-adjustments as per option (2) below.
2. The deployment clasp contains several ‘micro-adjustment’ steps. The
end-link of the bracelet can be moved incrementally across these
steps by using a bracelet pin tool.
We recommend having a professional jeweller or watchmaker perform
any bracelet adjustments to avoid damage to your bracelet or deployment
clasp.

9
WARRANTY INFORMATION
All watches purchased from Melbourne Watch Company come with a
24-month manufacturer’s warranty.
This warranty covers material production defects concerning the watch,
strap and movement.
It does not cover damage caused through misuse/physical force, or normal
wear and tear.
Your warranty will be valid from the date of purchase and will be noted on
a warranty card included with your order when shipped.
Your warranty will be rendered void if any attempts are made to repair or
modify your timepiece without prior consent from us.
If you have an issue with your timepiece, please notify us via our website
and we will do our best to assist you in resolving it as quickly as possible.
...//

W: melbournewatch.com.au
E: [email protected]om.au