Mellanox Technologies Grid Director 4036E User manual

www.mellanox.com
Grid Director 4036E
Installation Manual

2
Document Number: DOC-00911 A02
NOTE:
MELLANOX TECHNOLOGIES, INC. AND ITS AFFILIATES ("MELLANOX") FURNISH THIS DOCUMENT "AS IS," WITHOUT
WARRANTY OF ANY KIND. MELLANOX DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT
LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE,
NON-INFRINGEMENT AND THOSE ARISING FROM A COURSE OF PERFORMANCE, A COURSE OF DEALING, OR TRADE
USAGE. MELLANOX SHALL NOT BE LIABLE FOR ANY ERROR, OMISSION, DEFECT, DEFICIENCY OR NONCONFORMITY IN
THIS DOCUMENT AND DISCLAIMS ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY INTELLECTUAL
PROPERTY RIGHTS RELATED TO THE INFORMATION CONTAINED IN THIS DOCUMENT.
No license, expressed or implied, to any intellectual property rights is granted under this document. This document, as well as the software
described in it, are furnished under a separate license and shall only be used or copied in accordance with the terms of the applicable license. The
information in this document is furnished for informational use only, is subject to change without notice, and should not be construed as any
commitment by Mellanox. Except as permitted by the applicable license, no part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means without the express written consent of Mellanox.
Names and logos identifying products of Mellanox in this document are registered trademarks or trademarks of Mellanox. Voltaire is a
registered trademark of Mellanox Technologies, Ltd. All other trademarks mentioned in this document are the property of their respective
owners.
Copyright © 2011 Mellanox Technologies, Inc. All rights reserved.
Mellanox Technologies, Inc.
350 Oakmead Parkway Suite 100
Sunnyvale, CA 94085
U.S.A.
www.mellanox.com
Tel: [phone]
Fax: [phone]
Mellanox Technologies Ltd
PO Box 586 Hermon Building
Yokneam 20692
Israel
Tel: [phone]
Fax: [phone]
© Copyright 2011. Mellanox Technologies. All rights reserved.
Mellanox®, BridgeX®, ConnectX®, CORE-Direct®, InfiniBlast®, InfiniBridge®, InfiniHost®, InfiniRISC®, InfiniScale®, InfiniPCI®,
PhyX®, Virtual Protocol Interconnect and Voltaire are registered trademarks of Mellanox Technologies, Ltd.
FabricIT and SwitchX are trademarks of Mellanox Technologies, Ltd.
All other trademarks are property of their respective owners.

Contents
3
Contents
Preface.................................................................................................................................................... 7
1Introduction ..................................................................................................................................... 9
1.1 Grid Director 4036E Overview................................................................................................ 9
1.2 Grid Director 4036E Features................................................................................................. 9
1.3 Management......................................................................................................................... 10
2Unpacking...................................................................................................................................... 12
2.1 Overview of Unpacking the 4036E....................................................................................... 12
2.2 Package Contents ................................................................................................................ 12
2.3 Unpacking the Grid Director 4036E...................................................................................... 12
2.4 Rail Kit (KIT-00008).............................................................................................................. 14
2.5 Multipurpose (Mng) Console Cable Kit................................................................................. 14
2.6 Packing the Grid Director 4036E.......................................................................................... 14
3Getting Started .............................................................................................................................. 16
3.1 Getting Started Overview ..................................................................................................... 16
3.2 Front Panel Description........................................................................................................ 16
3.3 Rear Panel Description......................................................................................................... 17
4Product Options............................................................................................................................ 19
4.1 Grid Director 4036E Available Configurations...................................................................... 19
4.2 InfiniBand Clusters Using the Grid Director 4036E .............................................................. 19
4.3 Ordering Options .................................................................................................................. 19
5Technical Specifications and Certifications .............................................................................. 21
5.1 Grid Director 4036E Technical Specifications...................................................................... 21
5.2 Power Specifications - Power Supply Module...................................................................... 22
5.3 LED Indicators...................................................................................................................... 23
5.3.1 Ethernet Gateway LED Indicators .......................................................................... 25
5.4 Certifications......................................................................................................................... 25
5.5 Gost-R Certification .............................................................................................................. 26
5.6 Declarations.......................................................................................................................... 26
5.6.1 Declaration of Conformity....................................................................................... 26
5.6.2 Hazardous Substances (RoHS 6) Compliance Declaration................................... 26
5.7 Label(s)................................................................................................................................. 27
5.8 Shock and Vibration ............................................................................................................. 27
5.9 Chassis Clearance Requirements........................................................................................ 28
5.10 Weights and Dimensions...................................................................................................... 28
5.11 Acoustic Data........................................................................................................................ 29

Contents
4
5.12 Export Information ................................................................................................................ 29
5.13 Shipping Restrictions............................................................................................................ 29
6Hardware Installation.................................................................................................................... 30
6.1 Hardware Installation Overview............................................................................................ 30
6.2 Installation Options............................................................................................................... 30
6.2.1 Cooling.................................................................................................................... 30
6.3 Required Tools ..................................................................................................................... 30
6.4 Site Planning......................................................................................................................... 31
6.4.1 Rack and Clearance Requirements........................................................................ 31
6.4.2 Site Environment Specification............................................................................... 31
6.4.3 Power Requirements .............................................................................................. 31
6.4.4Site Preparation Checklist ...................................................................................... 32
6.5 Measuring the Distance between Mounting Rails ................................................................ 32
6.6 Assembling and Mounting the Rail....................................................................................... 32
6.6.1 Rail Kit..................................................................................................................... 32
6.6.2 Option 1 .................................................................................................................. 34
6.6.3 Option 2 .................................................................................................................. 40
6.7 Grid Director 4036E Power Up............................................................................................. 44
6.8 Field Replaceable Units........................................................................................................ 44
6.8.1 Fan Unit .................................................................................................................. 44
6.8.2 Power Supplies....................................................................................................... 45
7Cabling........................................................................................................................................... 46
7.1 Cabling Overview.................................................................................................................. 46
7.2 Cabling Guide Bracket Installation ....................................................................................... 46
7.3 Cabling.................................................................................................................................. 48
7.4 Multipurpose Management (Mng) Console Cable................................................................ 49
8Operation ....................................................................................................................................... 51
8.1 Operation Overview.............................................................................................................. 51
8.2 Powering the Grid Director 4036E........................................................................................ 51
8.3 Where to Go Next................................................................................................................. 52
9Troubleshooting............................................................................................................................ 53
9.1 Troubleshooting Overview.................................................................................................... 53
9.2 Solving Startup Problems..................................................................................................... 53
9.3 Preparation before Contacting Customer Support............................................................... 53
Appendix A: Cabling Information and Specifications............................................................. 54
A.1 QSFP Cable.......................................................................................................................... 54
A.2 10 GbE SFP+ Ethernet Cable .............................................................................................. 55
A.3 IB Port Cable Specifications................................................................................................. 56

Contents
5
A.4 SFP+ Port cable Specifications............................................................................................ 56
A.5 1 GbE Ports (Management).................................................................................................. 57
List of Figures
Figure 1: Grid Director 4036E Front View ............................................................................................... 9
Figure 2: Grid Director 4036E Rear View................................................................................................ 9
Figure 3: Fixed Rail (KIT-00008)........................................................................................................... 14
Figure 4: Console Cable Kit (Mng)........................................................................................................ 14
Figure 5: Grid Director 4036E Front Panel............................................................................................ 16
Figure 6: Grid Director 4036E Rear Panel ............................................................................................ 17
Figure 7: Mid-size two-tier CLOS InfiniBand Cluster Connected to Ethernet-based High-Performance
Storage.................................................................................................................................................. 19
Figure 8: Grid Director 4036E Label (Example).................................................................................... 27
Figure 9: 4036E –Option 1 Rack Mount Assembly.............................................................................. 34
Figure 10: Result –Rack front view ...................................................................................................... 39
Figure 11: 4036E –Option 2 Assembly................................................................................................. 40
Figure 12: Replacing the Fan................................................................................................................ 45
Figure 13: Replacing the Power Supply................................................................................................ 45
Figure 14: Cabling Guide Bracket (CG-24)........................................................................................... 46
Figure 15: Installing a Cabling Guide Bracket....................................................................................... 47
Figure 16: Installing a Cabling Guide Bracket (sliding rail) ................................................................... 47
Figure 17: Cable Management.............................................................................................................. 47
Figure 18: Console Cable Kit (Mng)...................................................................................................... 50
Figure 19: QSFP Connector-Dimensions.............................................................................................. 54
Figure 20: QSFP and 10 GbE Connectors............................................................................................ 55
Figure 21: SFP+ Connector-Dimensions............................................................................................... 56
Figure 22: Straight-through Cables ....................................................................................................... 57
Figure 23: Cross-connect Cables.......................................................................................................... 57
List of Tables
Table 1: Grid Director 4036E Front Panel Components ....................................................................... 16
Table 2: Rear Panel Components......................................................................................................... 17
Table 3: Ordering Information for the Grid Director 4036E................................................................... 19
Table 4: Ordering Information for the Grid Director 4036E Modules..................................................... 19
Table 5: Grid Director 4036E List of Parts (According to Configuration) .............................................. 20
Table 6: Grid Director 4036E Technical Data........................................................................................ 21
Table 7: Power Supply Module Data..................................................................................................... 23
Table 8: Grid Director 4036E LED Indications ...................................................................................... 23

Contents
6
Table 9: 10GbE LED Indicators............................................................................................................. 25
Table 10: Vibration ................................................................................................................................ 27
Table 11: Free Fall ................................................................................................................................ 28
Table 12: Clearance Requirements....................................................................................................... 28
Table 13: Unpacked Weights & Dimensions......................................................................................... 28
Table 14: Packed Weights & Dimensions ............................................................................................. 28
Table 15: Material and Tools Required ................................................................................................. 30
Table 16: Site Preparation Checklist..................................................................................................... 32
Table 17: Rail Kit (P/N KIT-00008) Detailed Part List ........................................................................... 33
Table 18: 4036E 10Gb E Ports Cabling Specifications......................................................................... 56

Grid Director 4036E Installation Manual
7
Preface
About this Manual
This manual provides installation instructions for the high-bandwidth, low-latency scalable
InfiniBand Mellanox Grid Director 4036E with 32 QDR and 2x10 GbE ports. It includes the
product specifications, unpacking and installation information, unit power up, and initiation
and troubleshooting procedures.
Refer to the official and latest product release notes for last-minute updates.
Technical support may be obtained directly from:
Your regional distributor from whom this product was ordered
Your OEM customer representative
For further information and assistance, go to
http://www.mellanox.com/content/pages.php?pg=support_index.
Audience
This manual is for system administrators responsible for installing the Grid DirectorTM 4036E.
We assume that you are familiar with the concepts and terminology of InfiniBand, Ethernet,
and local area networking.
Related Documentation
For additional information, refer to the following documents:
Grid Director Family Getting Started Guide [LIT-00037]
Grid Director Family User Manual [DOC-00785]
Grid Director Family Release Notes [DOC-00962]
Regulatory and Compliance Reference Guide [DOC-00859]
Document Conventions
The following lists conventions used in this document.
NOTE: Identifies important information that contains helpful suggestions.

Preface
8
CAUTION: Alerts you to the risk of personal injury, system damage, or loss of data.
WARNING: Warns you that failure to take or avoid a specific action might result in
personal injury or a malfunction of the hardware or software. Be aware of the hazards
involved with electrical circuitry and be familiar with standard practices for preventing
accidents before you work on any equipment.
Typography
The following table describes typographical conventions in Mellanox documentation. All
terms refer to isolated terms within body text or regular table text unless otherwise mentioned
in the Notes column.
Term, Construct,
Text Block
Example
Notes
File name, pathname
/opt/ufm/conf/gv.cfg
Console session (code)
-> flashClear <CR>
Complete sample line or block.
Comprises both input and output.
The code can also be shaded.
Linux shell prompt
#
The "#"character stands for the
Linux shell prompt.
Mellanox CLI Guest Mode
Switch >
Mellanox CLI Guest Mode.
Mellanox CLI admin mode
Switch #
Mellanox CLI admin mode
String
< > or []
Strings in < > or [ ] are descriptions
of what will actuallybeshown on the
screen, for example, the contents of
<your ip> could be 192.168.1.1
Management GUI label, item
name
New Network,
New Environment
Management GUI labels and item
names appear in bold, whether or not
the name is explicitly displayed (for
example, buttons and icons).
User text entered into Manager,
e.g., to assign as the name of a
logical object
"Env1", "Network1"
Note the quotes. The text entered
does not include the quotes.
Chapter 1

Grid Director 4036E Installation Manual
9
1 Introduction
1.1 Grid Director 4036E Overview
The Mellanox Grid Director 4036E is a high performance, low latency and fully non-blocking
InfiniBand switch, which includes a built-in low latency Ethernet gateway for bridging traffic
to and from Ethernet-based networks or storage. With thirty-four 40 Gbps InfiniBand ports
(delivering 2.72 Tbps), less than 100 nanoseconds of port-to-port latency, and two 1/10Gb
Ethernet ports bridging traffic in less than two microseconds, I/O bottlenecks are removed
making applications operate at maximum efficiency.
The Grid Director 4036E is a self-contained full solution including an InfiniBand switch, an
embedded subnet manager, and a built-in, hardware-based (cut-thru) low latency Ethernet
gateway in a compact 1U device.
The following figure shows the front view of a Grid Director 4036E Unit.
Figure 1: Grid Director 4036E Front View
The following figure shows the rear view of a Grid Director 4036E Unit.
Figure 2: Grid Director 4036E Rear View
1.2 Grid Director 4036E Features
The main features of the 4036E gateway include:
19" rack mountable chassis, 1U height, configurable with redundant power supplies and
fan units

Introduction
10
Aggregate data throughput: 2.72 Tb/s (QDR), 1360 Gbps (DDR) or 680Gbps (SDR)
34 QDR (40 Gbps) ports and two 1/10 GbE SFP+ ports in a 1U switch.
Ultra-low latency:
less than 100 nanoseconds between InfiniBand ports
less than two microseconds between InfiniBand and Ethernet
Virtual lanes: 8 data and 1 for management
MTU: 4096 Bytes (max.)
Additional features include:
Low latency, hardware-based (cut-thru) bridging between InfiniBand and Ethernet
Provides high performance connectivity to Ethernet-based services and resources
Consolidates network and I/O infrastructure
Plug & play, standards-based protocol bridging with zero configuration required on the
Grid Director 4036E itself or on the servers
Embedded subnet manager
Transparent mapping between Ethernet VLANs and InfiniBand partitions to ensure
continuity of security and service levels
Accelerating IP multicast over InfiniBand using hardware-based multicast
Flow control support over both InfiniBand and Ethernet links for efficient handling of
congestion
Layer 2/3/4-based packet filtering and classification
Link aggregation (LAG) between Ethernet ports
Aggregation of Ethernet ports from multiple gateways for scalability or redundancy
purposes
Designed to provide high MTBF
Redundant, hot-swappable power supplies
Supported cables: InfiniBand QSFP and Ethernet 10G/1G Copper or Optical
Built-in cable detection and optimization to achieve the longest available cable distance
and highest performance.
Built-in high availability.
1.3 Management
The 4036E Gateway includes smart device management that provides a simple Command
Line interface for deploying, troubleshooting, maintaining and upgrading the switch. You can
use the CLI to perform routine tasks such as monitoring the switch operation or upgrade the
software and firmware.

Grid Director 4036E Installation Manual
11
The 4036E Gateway comes with an onboard subnet manager, enabling simple, out-of the-box
fabric bring-up for small to medium clusters.
Refer to the Grid Director 4000 Family User Manual for details on 4036E software
requirements and configuration.
Chapter 2

Unpacking
12
2 Unpacking
2.1 Overview of Unpacking the 4036E
This chapter provides step-by-step instructions for the packing and unpacking the 4036E
Gateway.
2.2 Package Contents
Mellanox delivers the 4036E Gateway in a cardboard box. The gateway comes with one or two
pre-installed hot-swappable power supplies (according to configuration) and one
hot-swappable fan unit.
Additional components include:
Two power cords.
Rail kit (refer to Rail Kit (KIT-00008) (on page 14) for details).
A multipurpose console cable kit (Mng). Refer to Multipurpose (Mng) Console Cable Kit
(on page 14) for details.
Grid Director Getting Started Guide (hard copy).
A product CD containing Grid Director 4036E documentation and software.
Before You Begin
Before unpacking, make sure that the box is sealed and undamaged.
Before beginning the installation of the Grid Director 4036E, verify that the package
contains all the items, as detailed in the Getting Started Guide. For alist of parts delivered
with the product, see Ordering Options (on page 19).
Check for loose parts or any visible damage to the contents. Notify your supplier if you
detected damaged or missing parts.
2.3 Unpacking the Grid Director 4036E
This section details the Grid Director 4036E package contents and provides instructions on
how to unpack the chassis.
To unpack the Grid Director 4036E, perform the following steps:
1. Open the box and check that it contains the items as shown in the following figure.

Grid Director 4036E Installation Manual
13
2. Remove the box containing the Rail Kit, the Power Cords, and the multipurpose console
cable kit (Mng).
3. Remove the Getting Started Guide.
4. Remove the top foam.
5. Carefully remove the Grid Director 4036E. Use the dedicated niche to lift the switch, as
shown in the following figure.

Unpacking
14
6. Remove the protective antistatic bag from the Grid Director 4036E.
2.4 Rail Kit (KIT-00008)
The rail kit entails:
2 Short Brackets (Angular bracket mount)
2 Long Brackets (Left and Right)
2 mounting bars
14 pan head Philips screws, 8-32 x 1/4" with tooth lock washers and nylon patch.
Figure 3: Fixed Rail (KIT-00008)
2.5 Multipurpose (Mng) Console Cable Kit
The multipurpose console kit (Mng) contains:
RJ45 to RJ45 cable
A RJ45 to DB-9 cross-adaptor for RS-232 console connection (CLI) (the DB-9 adaptor has
a number 26 printed on it, which means that pins 2 and 6 are crossed)
A RJ45 to DB-9 adaptor for RS-232 console connection.
Figure 4: Console Cable Kit (Mng)
2.6 Packing the Grid Director 4036E
You may need to move the Grid Director 4036E to a different location or send it for repair;
should this be necessary, pack the equipment as described below.

Grid Director 4036E Installation Manual
15
To pack the Grid Director 4036E, perform the following steps:
1. Unmount the Grid Director 4036E from the rack.
2. Disassemble the rail brackets and pack the parts in the rail kit box.
3. Insert the Grid Director 4036E into its antistatic bag.
4. Carefully lift the switch, making sure that the bottom of the switch is facing down.
Tip: you can easily identify the bottom of the switch since it has a certification label.
5. Insert the switch into the cardboard box and place it on the bottom foam.
6. Place the top foam on top of the switch.
7. Slide the rail kit box in the dedicated niche alongside of the switch. When sending the
switch for repair without the rail kit, secure it by filling this niche with a filler. This will
protect the switch and prevent it from moving during transportation.
8. Place the Getting Started Guide and the Multipurpose Console Kit (Mng) on top of the top
foam.
9. Place the power cords in the allocated spaces in the foam.
10.Use tape to close the box and verify that the box is securely closed.
Chapter 3

Getting Started
16
3 Getting Started
3.1 Getting Started Overview
The following sections provide a detailed description of the front and rear panels of the
Grid Director 4036E.
3.2 Front Panel Description
This section details the front panel Grid Director 4036E.
Figure 5: Grid Director 4036E Front Panel
The following table details Grid Director 4036E front panel components.
Table 1: Grid Director 4036E Front Panel Components
Item
Component
No. of
components
Description
1
Power Supply
(PSU)
1 or 2 (according
to configuration)
The swappable power supply modules provide the Grid
Director 4036E DC supply. You can install one or two
AC/DC 100-240Vac to 12Vdc 350W hot-swappable
redundant power supplies in the Grid Director 4036E.
The power supply has an IEC Power Receptacle that
supplies the chassis input voltage, as indicated in the
power supply characteristics in Power Specifications -
Power Supply Module (on page 22)
2
LEDs (Status
Indicators)
5
Front panels LEDs:
System Power
Info
SM
Fan Unit
Power Supply
I/O LED
Refer to LED Indicators (on page 23) for the list of LEDs
and their descriptions.
3
AC power Inlet
2
Power Supply power inlet type 6A type C14.
4
Reset Button
1
When pressed for more than 1 second, resets the entire
unit.
5
Fan Unit
1
Hot swappable fan unit hosting three internal fans for
high availability. Auto-heat sensing allows for silent fan
operation.

Grid Director 4036E Installation Manual
17
Item
Component
No. of
components
Description
Two options are available:
Front-to-rear cooling (labeled as "Air-in")
Rear-to-front cooling (labeled as "Air-out")
3.3 Rear Panel Description
This section details the rear panel of a Grid Director 4036E.
Figure 6: Grid Director 4036E Rear Panel
The following table details Grid Director 4036E rear panel components.
Table 2: Rear Panel Components
Item
Component
Qty
Description
1
InfiniBand Port
Connector
34
4X QSFP InfiniBand connectors for passive copper cables, active
copper cables, active optical cables, and connect optical cables.
2
10Gbps Ethernet SFP+
ports
2
1GbE/10GbE SFP+ ports
3
RS232 serial interface
1
D-sub -9 pin connector (serial interface) for the CLI
4
10/100/1000 Ethernet
port
RJ-45 Connector
1
Gigabit Ethernet auto-negotiating RJ-45 Connector for
management purposes.
Speed: 1Gbps/100Mbps/10Mbps (& LED). Provides out-of-band
management interface over a local network.
5
LEDs (Status
Indicators)
4
Rear panel LEDs:
Pwr
PS/FAN
Info
SM
I/O Status
Refer to LED Indicators (on page 23) for the list of LEDs and their
descriptions.
68
InfiniBand Port Indicators. Indicate the physical and logical status
of each InfiniBand port. (2 LEDs per port) 4 10Gb E port
indicators.
4
10GbE port indicators. Indicate the physical and logical status of
each 10GbE port. (2 LEDs per port)

Getting Started
18
Item
Component
Qty
Description
Green –Physical link LED
Orange –Logical link
6
USB connector (Type
A)
1
One USB 2.0 Host interface allows you to increase the CPU flash
memory by a connection to a standard Disk-On-Key device.
7
Chassis reset button
1
When pressed for more than 1 second, resets the entire unit.
NOTE: InfiniBand port #1 is located at the bottom left hand side of the rear panel,
InfiniBand port #34 is at the top right hand side.
Chapter 4

Grid Director 4036E Installation Manual
19
4 Product Options
4.1 Grid Director 4036E Available Configurations
The Grid Director 4036Eis a 1U entry level switch with 34 InfiniBand 4X and 2 1GbE/10GbE
ports, providing bidirectional 40 Gbps/20 Gbps per port grid connectivity. The Grid Director
can serve as an edge switch in large fabrics (where the Grid Director 4036E is serving as core
switch) or as a standalone managed unit in smaller clusters.
4.2 InfiniBand Clusters Using the Grid Director 4036E
The Grid Director 4036E acts as a standalone unit or as a building block for larger clusters.
The following figure show a mid-size two-tier (triple-hop) non-blocking configuration, based
on multiple Grid Directors 4036E functioning as the cluster’s building blocks.
Figure 7: Mid-size two-tier CLOS InfiniBand Cluster Connected to Ethernet-based High-Performance
Storage
4.3 Ordering Options
This section provides the Grid Director 4036E and modules ordering information.
Table 3: Ordering Information for the Grid Director 4036E
Number
Name
Description
VLT-30034
4036E 34 Port QDR Switch
ETH Gateway
Grid Director 4036E 1U 34 port QDR Switch,
front-to-back cooling, dual PS
VLT-30035
4036E 34 Port QDR Switch
ETH Gateway-Low Mem
Grid Director 4036E 1U 34 port QDR Switch,
front-to-back cooling, dual PS, low memory.
Table 4: Ordering Information for the Grid Director 4036E Modules
Number
Name
Description
VLT-30029-F
PS-36 AC FRU
PS-36 AC, FRU

Product Options
20
Number
Name
Description
VLT-30030-F
FAN-1U Unit Back-To-Front
FRU
FAN-1U unit back-to-front cooling, FRU
VLT-30031-F
FAN-1U Unit Front-to-Back
FRU
FAN-1U unit front-to-back cooling, FRU
KIT-00008
Rail Kit
510K00022-F
CG-24
Cabling guide bracket kit
Table 5: Grid Director 4036E List of Parts (According to Configuration)
Chassis
P/N
Powe
r
suppl
y unit
Power
cord,
PDU
plug
Fan
unit
Air
in
Rail
kit
Cabli
ng
guide
brack
et kit
Mult
ipur
pose
Man
agem
ent
cons
ole
cable
kit
Prod
uct
CD (
docu
ment
ation
&
softw
are)
Getti
ng
Start
ed
Guid
e
hard
copy
PSU-1
U
Power
Cord
Fan
Unit
1U
KIT-
0008
CG-24
Mng
4036E
VLT-30034
2
2
1
1
*
1
0
1
4036E-LM
VLT-30035
2
2
1
1
*
1
0
1
(*) Optional
Chapter 5