Mellerware Executive 35920A User manual

PLEASE READ ALL INSTRUCTIONS BEFORE USE
2 year guarantee
EXECUTIVE
ELEGANT BREEZE 40CM PEDESTAL FAN
Model:
35920A
50W
complies with
INTERNATIONAL
IEC60355
SAFETY SPECIFICATIONS
35920A_IM.indd 1 2012/06/18 09:56:06 AM

Dear Customer,
Thank you for purchasing a MELLERWARE household appliance. Its technology, design, and functional-
ity, along with complying to the strictest quality standards, will be a source of satisfaction for a long time
to come.
Description
A Motor body
B Base support
C Speed selector control
D Fan propeller
E Carry handle
F Motor support
G Counterweight base
H Washer
I “L” shaped screw
J Height adjustment control
K Motor body screw fastening
L Motor body screw
M Incline adjustment screw
N Incline adjustment lever
O Security screw
P Front grille
Q Rear grille
R Motor shaft
S Adjustable column
T Oscillation control
35920A_IM.indd 2 2012/06/18 09:56:06 AM

Safety advice and cautions:
Read these instructions carefully before switching
on the appliance and keep them for future refer-
ence. Failure to follow and observe these instruc-
tions could lead to an accident.
Use or working environment:
Place the appliance on a horizontal, flat, and stable
surface.
CAUTION: To prevent overheating do not cover
the appliance.
Electrical safety:
• Do not use the appliance if the cable or plug is
damaged.
• Ensure that the voltage indicated on the rating
label matches the mains voltage before plugging
the appliance in.
• Connect the appliance to a mains socket with an
earth provision.
• The appliance’s plug must fit into the mains
socket properly. Do not alter the plug. Do not
use plug adaptors.
• Do not use or store the appliance outdoors.
• If any of the appliance’s casings break, immedi-
ately disconnect the appliance from the mains to
prevent the likelihood of an electric shock.
• Do not use the appliance if it has fallen on the
floor or if there are visible signs of damage.
• Do not force the electrical connection wire. Nev-
er use the electric wire to lift up, carry or unplug
the appliance.
• Do not wrap the power cord around the appli-
ance.
• Do not touch the plug with wet hands.
Personal safety:
Do not touch any of the appliance’s moving parts
while it is operating.
Use and care:
• Fully unroll the appliance’s power cable before
use.
• Do not use the appliance if the on/off switch
does not work.
• Do not move the appliance while in use.
• Do not switch the appliance on if it has tipped
over.
• Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
• This appliance is for household use only, not
professional or industrial use.
• Switch off the appliance and disconnect from
electrical supply before changing accessories or
handling parts that move in use. This appliance
should be stored out of reach of children and/or
disabled persons.
• This appliance is not intended for use by per-
sons (including children) with reduced physical,
sensory or mental capabilities, or lack of expe-
rience and knowledge, unless they have been
given supervision or instruction concerning use
of the appliance by a person responsible for their
safety.
• Children should be supervised to ensure that
they do not play with the appliance.
• Do not expose the appliance to extreme tem-
peratures.
• Any misuse or failure to follow the instructions
for use renders the guarantee and the manufac-
turer’s liability null and void.
Installation:
Assembly:
• Fit the adjustable column (S) into the hole in the
base support (B), place the counterweight base
(G) underneath the support base (B) and secure
with the “L” shaped screw (I) inserting the washer
(H) between the base and “L” shaped screw (I)
(Fig.1)
• Fix the motor (A) to the adjustable column (S)
through the support motor (F) and fix in place
with the motor body screw fastening (K) and the
motor body fastening lever (L) making it coincide
with the appropriate holes. Next introduce the
incline adjustment screw (M) into the appropri-
ate hole and tighten it with the inline adjustment
lever (N).
• Unscrew the 4 screws and remove the washers
35920A_IM.indd 3 2012/06/18 09:56:07 AM

situated further back from the front part of the
motor body (A). Using these 4 screws, attach the
rear grille (Q), ensuring that the carrying handle
(E) is on the upper part of the appliance.
• Insert the fan propeller (D) onto the motor shaft
(R) until the hole in the fan propeller coincides
with motor shaft groove. Next use the fan propel-
ler tightening screw to tighten it completely.
• Position the front grille (P) on to the back grille
(Q), press them together ensuring that the clips
are in alignment. Make sure that the hole in the
front grille coincides with the security screw (O).
• To ensure that the front and rear grilles are se-
curely fitted together secure each one with the
security screw (O). This should be introduced
through the hole so that the grille’s cannot be
separated without the use of a tool.
Instructions for use:
• Unroll the cable completely before plugging it in.
• Connect the appliance to the mains electrical
supply.
• Guide the appliance to direct the flow of air in the
desired direction.
• Select the desired speed.
Height Adjustment:
The height of the appliance can be adjusted by
loosening the control, setting the appliance to the
desired height and tightening the control again.
Oscillating function:
• The oscillating function makes it possible to di-
rect the flow from the apparatus so that it auto-
matically alternates over a range of 75º.
• To activate this function press the oscillating
function control (T).
Once you have finished using the appliance:
• Stop the appliance, selecting position 0 on the
selector control.
• Unplug the appliance from the mains power sup-
ply.
Carry handle:
This appliance has a handle on the back to make it
easy and convenient to transport.
Safety trip switch:
The appliance has a safety trip switch that protects
the appliance from overheating.
Cleaning:
• Disconnect the appliance from the mains and al-
low it to cool before undertaking any cleaning
task.
• Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
• Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
• Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
• Do not submerge the appliance in water or any
other liquid.
Anomalies and repair:
• Take the appliance to an authorised technical
support centre if problems arise. Do not try to
dismantle or repair without assistance, as this
may be dangerous.
• If the connection to the mains has been dam-
aged, it must be replaced and you should pro-
ceed as you would in the case of damage.
35920A_IM.indd 4 2012/06/18 09:56:07 AM

35920A_IM.indd 5 2012/06/18 09:56:07 AM

35920A_IM.indd 6 2012/06/18 09:56:07 AM