Mellerware ELEGANT BREEZE 35920 User manual

PLEASE READ ALL INSTRUCTIONS BEFORE USE
2 year guarantee
EXECUTIVE
ELEGANT BREEZE 40CM PEDESTAL FAN
Model:
35920
60W
complies with
INTERNATIONAL
IEC60355
SAFETY SPECIFICATIONS
MW_EX35920_Elegant_Breeze 16'_fan_IM.indd 1MW_EX35920_Elegant_Breeze 16'_fan_IM.indd 1 7/7/2009 2:38:32 PM7/7/2009 2:38:32 PM

Dear Customer,
Thank you for purchasing a MELLERWARE household appliance. Its technology, design, and functional-
ity, along with complying to the strictest quality standards, will be a source of satisfaction for a long time
to come.
Description
A Motor body
B Base support
C Speed selector control
D Fan propeller
E Carry handle
F Motor support
G Counterweight base
H Washer
I “L” shaped screw
J Height adjustment control
K Motor body screw fastening
L Motor body fastening lever
M Incline adjustment screw
N Incline adjustment lever
O Security screw
P Front grille
Q Rear grille
R Motor shaft
S Adjustable Column
T Oscillation control function
MW_EX35920_Elegant_Breeze 16'_fan_IM.indd 2MW_EX35920_Elegant_Breeze 16'_fan_IM.indd 2 7/7/2009 2:38:33 PM7/7/2009 2:38:33 PM

Safety advice and cautions
• Read these instructions carefully before switch-
ing on the appliance and keep them for future
refer ence. Failure to follow and observe these
instructions could lead to an accident.
Use or working environment:
• Place the appliance on a horizontal, flat, and
stable surface.
•CAUTION: To prevent overheating do
not cover the appliance
Electrical safety:
• Do not use the appliance if the cable or plug is
damaged.
• Ensure that the voltage indicated on the rating
label matches the mains voltage before plugging
in the appliance.
• Connect the appliance to a mains socket with an
earth provision.
• The appliance’s plug must fit into the mains sock-
et properly. Do not alter the plug. Do not use plug
adaptors.
• Do not use or store the appliance outdoors.
• If any of the appliance’s casing breaks, immedi-
ately disconnect the appliance from the mains to
prevent the likelihood of an electric shock.
• Do not use the appliance if it has fallen on the
floor, if there are visible signs of damage.
• Do not force the electrical connection wire. Never
use the electric wire to lift up, carry or unplug the
appliance.
• Do not wrap the power cord around the appli-
ance.
• Do not touch the plug with wet hands.
before each use.
Personal safety:
• Do not touch any of the appliance’s moving parts
while it is operating.
Use and care:
• Fully unroll the appliance’s power cable before
each use.
• Do not use the appliance if the on/off switch
does not work.
• Do not move the appliance while in use.
• Do not use the appliance if it is tipped up and
do not turn it over.
• Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
• This appliance is for household use only, not
professional or industrial use.
• This appliance is intended for adult use. Ensure
that this product is not used by the disabled, chil-
dren or people unused to its handling.
• This appliance should be stored out of reach of
children and/or disabled persons.
• Do not expose the appliance to extreme tem-
peratures.
• Any misuse or failure to follow the instructions
for use renders the guarantee and the manufac-
turer’s liability null and void.
Installation
Assembly
• Fit the Adjustable Column (S) into the hole in
the Support Base (B), place the counterweight
(G) underneath the Support Base (B) and se-
cure with the “L” shaped screw (I) inserting the
washer (H) between the base and “L” shaped
screw (I) (Fig.1)
• Fix the motor body (A) to the adjustable
column (S) through the support motor (F) and
fix in place with the motor body screw fastening
(K) and the motor body fastening lever (L) mak-
ing it coincide with the appropriate holes. Next
introduce the incline adjustment screw (M) into
the appropriate hole and tighten it with the inline
adjustment lever (N)
MW_EX35920_Elegant_Breeze 16'_fan_IM.indd 3MW_EX35920_Elegant_Breeze 16'_fan_IM.indd 3 7/7/2009 2:38:33 PM7/7/2009 2:38:33 PM

• Unscrew the 4 screws and remove the washers
situated further back from the front part of the mo-
tor body (A) Using these 4 screws screw in the rear
grate (Q), leaving the carrying handle (E) on the up-
per part of the appliance.
• Insert the fan propeller (D) in the motor shaft (R)
until the hole in the fan propller coincides with mo-
tor shaft groove. Next use the fan propeller tighten-
ing screw to tighten it completely.
• Position the front grill (P) on to the back grill (Q),
press them together ensuring that an accurate fit-
ting between the two grills and alignment with the
clips on the front grill. Make sure that the hole in the
front grill coincides with the security screw (O).
• To ensure that the front and rear grills are securely
fitted together secure each one with the security
screw (O). This should be introduced through the
hole so that the grille's cannot be separated without
the help of a tool.
Instructions for use
Use:
• Unroll the cable completely before plugging it in.
• Connect the appliance to the mains.
• Guide the appliance to direct the flow of air in the
desired direction.
• Select the desired speed.
Height Adjustment:
• The height of the appliance can be adjusted by
loosening the control situate the appliance at the
desired height and tighten the control.
Oscillation function:
• The oscillation function makes it possible to direct
the flow from the apparatus so that it automatically
alternates over a range of 75º.
• To activate this function press the oscillation func-
tion control (T).
Once you have finished using the appliance:
• Stop the appliance, selecting position 0 on the
selector control.
• Unplug the appliance from the mains.
Carry handle:
•This appliance has a handle on the back to make
it easy and convenient to transport.
Safety trip switch:
•The appliance has a safety trip switch that protects
the appliance from overheating.
Cleaning
• Disconnect the appliance from the mains and al-
low it to cool before undertaking any cleaning task.
• Clean the equipment with a damp cloth with a few
drops of washing-up liquid and then dry.
• Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products, for
cleaning the appliance.
• Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of the
appliance.
• Do not submerge the appliance in water or any
other liquid.
Anomalies and repair
• Take the appliance to an authorised technical
support service if problems arise. Do not try to dis-
mantle or repair without assistance, as this may be
dangerous.
• If the connection to the mains has been damaged,
it must be replaced and you should proceed as you
would in the case of damage.
MW_EX35920_Elegant_Breeze 16'_fan_IM.indd 4MW_EX35920_Elegant_Breeze 16'_fan_IM.indd 4 7/7/2009 2:38:33 PM7/7/2009 2:38:33 PM

MW_EX35920_Elegant_Breeze 16'_fan_IM.indd 5MW_EX35920_Elegant_Breeze 16'_fan_IM.indd 5 7/7/2009 2:38:33 PM7/7/2009 2:38:33 PM

27 Nourse Avenue Epping 2 Cape Town
P.O. Box 975 Eppindust 7475 South Africa
Tel: [phone] Fax: [phone]
Service Centre Share Call: 086 111 5006
web: www.creativehousewares.co.za
MW_EX35920_Elegant_Breeze 16'_fan_IM.indd 6MW_EX35920_Elegant_Breeze 16'_fan_IM.indd 6 7/7/2009 2:38:33 PM7/7/2009 2:38:33 PM