MERCATOR Zane User manual

Thank you for choosing Mercator. Please read the
instructions listed below carefully before use. Keep
these instructions in a safe place for future reference.
Content
• 1 x Wireless Charging Task Lamp
• 1 x Power Adapter
Warning
• Read all instructions before using this luminaire.
• This luminaire is designed for household use only.
• To eliminate choking hazard for young children,
remove and safely discard any protective
packaging and promotional labels.
• This luminaire is not intended for use by children.
Young children should be supervised to ensure
that they do not play with this luminaire.
• Ensure that the power cord is not twisted, bent, or
crushed. This may cause the insulation to weaken,
and/or signicantly damage the cord. Replace
the power supply if it is damaged in any way.
• Ensure that this luminaire is installed/operated in
cool, dry environment.
• Only use the power supply provided with this
luminaire.
• Prior to conducting any maintenance or cleaning
on the luminaire, always ensure the power is OFF
and the luminaire has cooled down.
• Non replaceable LED: the light source of the
luminaire is not replaceable; when the light
source reaches its end of life the whole luminaire
shall be replaced.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualied persons in order to avoid a
hazard.
• The lamp housing may get hot when the lamp is
operating, do not touch to avoid a hazard.
• To prevent damage to the appliance do not use
alkaline cleaning agents when cleaning. Use a
soft cloth and a mild detergent. Always switch off
before cleaning.
• Failure to maintain the lamp in a clean condition
could lead to deterioration of the surface that
could adversely affect the life of the appliance
and possibly result in a hazardous situation.
WARNING: FIRE RISK EXISTS IF THE LAMP IS
COVERED BY OR POSITIONED CLOSE TO CURTAINS
OR OTHER COMBUSTIBLE MATERIALS.
MRIN005953 210mm x 297mm
Specications
Product Name: Zane
Model: AUL1118
Description: LED Wireless Charging Task Lamp
Rated Voltage: 220-240V~50HZ
Power supply: 12VDC, 2A
Light Source: 5W Integrated LED
Colour Temperature: 6000K Daylight
Lumens: 380lm
Wireless Charging Output: 5W
For indoor use only

General Handling & Installation
• Ensure the luminaire is placed on a at and stable surface.
• This luminaire should not be installed/operated in locations where it is exposed to excessive moisture,
dust, humidity. Under direct sunlight, or in hot environments.
• Ensure that the luminaire has not sustained any damage during transport. Do not use this product if it is
damaged. Return the complete product to the place of purchase for inspection or replacement.
Operation
How to use
1. Plug the power adapter into the power socket located on the rear of the base.
2. Then, plug the power adapter into a 220 – 240V ~ 50Hz power socket.
This lamp supports three brightness settings.
1. Touch the switch to toggle the lamp ON/OFF.
2. Touch the switch once to activate the low brightness setting.
3. Touch the switch twice to activate the medium brightness setting.
4. Touch the switch three times to activate the high brightness setting.
Charging
• This luminaire supports wireless charging.
• Place smartphone (with wireless charging capability) on the charging module (5) to begin charging.
Note: • If the phone does not charge, remove any case material, and try again.
• The wireless charger is only compatible with smartphones that support wireless charging
( Samsung Galaxy models S6 and above and Apple iPhones version 8 and above).
MRIN005953
Imported by:
Mercator Pty Ltd. Create. Inspire. Innovate
Caribbean Park, 36 Lakeview Drive, Scoresby,
Victoria 3179
[e-mail]
Made in China
The packaging material is recyclable. Dispose of the packaging in an
environmentally friendly manner and make it available for the recyclable
material collection-service.
1. Base
2. Touch Switch
3. Lamp Housing
4. Flexible Goose Neck
5. Wireless Charging Module
6. Power Adapter