Mercia Garden Products 01DTSHAX0406SDFW-V1 User manual
2mm Drill bit
x2
¡
¡
Before assembly
please make sure you have a
suitable base ready to erect your
building
MADE IN GREAT BRITAIN
Overall Dimensions:
Width = 1972mm
Depth = 1299mm
Height = 2039mm
Base Dimensions:
Width = 1860mm
Depth = 1190mm
7
Ridge Bar - 28x28x1137mm QTY 1
FS2828-1137mm
8
Door Block - 27x44x160mm QTY 1
F2744-160mm
9
Cover Strip - 40x12x1570mm QTY 4
S1240-1570mm
10
Fascia - 12x80x1045mm QTY 4
S1280-1045mm
11
Greenhouse Roof Frame - 44x27x1574mm QTY 2
F2744-G-1594mm (Angled) - Used only when attaching greenhouse to shed.
12
Greenhouse Roof Block - 44x27x410mm QTY 1
F2744-G-450mm (Angled) - Used only when attaching greenhouse to shed.
13
T-Hinge QTY 3
PI-07-0021
14
“L” Bracket QTY 2
PI-07-0012
15
Pad Bolt QTY 1
PI-07-0035
16
Shed Diamond Finial QTY 2
Shed diamond Finial
17
Felt
PI-01-0013
50mm Screws x 46
30mm Screws x 63
20mm Screws x 8
Felt Tacks x 100
60mm Screws x 8
5 6
Floor QTY 1
AI-S21MBF1190X1860-V1
Roof QTY 2
AI-S11MBOHAR1075X1217-V1
1 2 3
4
Door QTY 1
AI-S21FBMBZBD544X1660-V1
Door Gable QTY 1
AI-01S11SHASD2FW1808X1970-V1
Plain Side QTY 2
AI-S11SHPP1193X1571-V1
Plain Gable QTY 1
AI-01S11SHAGP1808X1970-V1
Nail Bag
There may be extra screws present in the nail bag
18
Turn Button QTY 2
PI-07-0034
Contents:
**This building can be constructed with an Apex Greenhouse. Please see the Greenhouse
instructions for construction.**
8x6 Greenhouse with shed
Overall Dimensions:
Width = 1972mm
Depth = 2447mm
Height = 2039mm
Base Dimensions:
Width: 1860mm
Depth: 2397mm
10x6 Greenhouse with shed
Overall Dimensions:
Width = 1972mm
Depth = 3030mm
Height = 2039mm
Base Dimensions:
Width: 1860mm
Depth: 2980mm
12x6 Greenhouse with shed
Overall Dimensions:
Width = 2042mm
Depth = 3665mm
Height = 2039mm
Base Dimensions:
Width: 1860mm
Depth: 3590mm
Pre Assembly
Before assembling remove the transportation
blocks from the bottom of each panel.
Take care removing the blocks as to not damage
the panels. Tap with a at headed screwdriver
and hammer.
Dispose of the blocks once removed.
Pre drill
hole
30mm
screw
1
4
13
Step 1
Parts Needed- No.1 QTY 1
- No.4 QTY 1
- No.13 QTY 3
Place the Door (No. 4) into the Door
Gable (No. 1) aperture, making sure
there is an equal amount of space
either side of the door.
Once in place, secure the Door to
the Door Gable using three T-hinges
(No. 13) securing each hinge into
position with 7x30mm screws.
21x30mm screws.
IMPORTANT: Pre-drill before xing screws.
IMPORTANT: Pre-drill before xing screws.
5
Step 2
Parts Needed- No.5 QTY 1
Place the Floor (No. 5) onto a rm and
level base.
Ensure your base has suitable drainage
and is free from areas where standing
water can collect.
IMPORTANT: Pre-drill before xing screws.
Pre drill
hole
50mm
screw
2
3
a
a
a
a
Step 3
Parts Needed- No.2 QTY 1
- No.3 QTY 1
Place the Plain Gable (No.3) and one of
the Plain Panels (No.2) on to the Floor
and x the corners together using
3x50mm screws.
Do not secure the building to the oor
until the roof is secured in place.
*Ensure the plain gable is tted on the
inside of the plain panel. Screw
through the plain gable framing into
the framing of the plain panel.
3x50mm screws
IMPORTANT: Pre-drill before xing screws.
2
1
Pre drill
hole
50mm
screw
a
a
a
a
a
a
a
a
a
Step 4
Parts Needed- No.1 QTY 1
- No.2 QTY 1
Place the assembled Door Gable (No.1)
and one of the Plain Panels (No.2) on to
the oor and x the corners together
using 3x50mm screws.
Do not secure the building to the oor
until the roof is secured in place.
*Ensure the Door gable is tted on the
inside of the plain panel. Screw
through the Door gable framing into
the framing of the plain panel.
9x50mm screws
a
IMPORTANT: Pre-drill before xing screws.
714
714
14
Pre drill
hole
20mm
screw
Step 5
Parts Needed- No.7 QTY 1
- No.14 QTY 2
Fix the Corner Braces (No. 14) to either
end of the Ridge Bar (No. 7) using
2x20mm screws per bracket.
*Ensure the corner bracesare ush
with each end of the ridge bar.
Once in place position the ridge bar
between the gables, securing into posi-
tion using 2x30mm screws per side.
8x20mm Screws
IMPORTANT: Pre-drill before xing screws.
60mm
screw
Pre drill
hole
Step 6
Parts Needed- No.6 QTY 2
Place the Roof Panels (No. 6) on top of the
building, making sure the framing in the
roof panels sits rmly within the Gable
Panels (No. 1 & 3) and on top of the Ridge
Bar (No. 7).
**Make sure that you have got the roof
panels the correct way round with the
recess at the top of the apex as shown in
the diagram.**
**The edges of the roof panels must be
ush with the outer cladding of the
Gable Panels (No. 1 & 3).**
From the top, x directly through the Roof
Panels (No. 6) and into the Ridge Bar (No. 7)
below using 4x60mm screws per Roof
Panel.
It is essential that the Ridge Bar (No. 7) and
Roof Panel (No. 6) framing pull together
when xed with 60mm screws. You may
require another person pushing the Ridge
Bar (No. 7) up from below to achieve this.
**HINT - Follow the nailing line of the
framing on the roof panel so that you are
more likely to x into the ridge bar
below. **
8x60mm Screws
6
6
IMPORTANT: Pre-drill before xing screws.
Step 7
Secure the Roof to the panels below
using 16x50mm screws, screwing
through the roof and into the panel
framing below
Ensure there is no more than 300mm
between each screw.
16x50mm screws
Pre drill
hole
50mm
screw
IMPORTANT: Pre-drill before xing screws.
Step 8
Once the roof has been xed into
place, secure the building to the oor
using 18x50mm screws.
*Ensure to screw through the panel
framing into the oor bearers
below.
18x50mm screws
b
Pre drill
hole
50mm
screw
b
b
b
bb
b
b
b
IMPORTANT: Pre-drill before xing screws.
Pre drill
hole
30mm
screw
9
9
9
9
8
Step 9
Parts Needed- No.9 QTY 4
- No.8 QTY 1
Place a cover strip (No. 9) at each
corner of the building & x into
position using 3x30mm screws per
strip.
Fix the Door block (No.8) to the
inside of the door, ensuring its
ush to the door framing, secure
using 2x30mm screws through the
door boards and into the door
block (No.8)
14x30mm Screws
IMPORTANT: Pre-drill before xing screws.
HANDLE
WITH CARE
12
3
4
Felt
tacks
17
12
3
Step 10
Parts Needed- No.17 QTY 1
Cut the felt (No.17) into three strips measuring:
1320mm (L) x 1000mm (W) and lay onto the roof in
the order shown in the illustration.
*Ensure the felt is overhanging the sides of the
roof by approximately 50mm, and the sheets
overlap by 100mm.
Fix the felt into place using felt tacks at 100mm
intervals.
100 x Felt Tacks
100mm
IMPORTANT: Pre-drill before xing screws.
18
15
Pre drill
hole
30mm
screw
Step 11
Parts Needed- No.15 QTY 1
- No.18 QTY 2
Screw the Pad Bolt (No.15) on to the
door (No.4) and the retainer to the
door gable (No.1) using 10x30mm
screws. Make sure that you screw into
the framing behind.
Fix the Turn Button (No. 18) onto the
Door Gable (No. 1) using 1x30mm
screw for each one.
*These turn buttons help to keep
your doors straight during high
and low levels of moisture content
in the air.*
12x30mm Screws.
IMPORTANT: Pre-drill before xing screws.
Pre drill
hole
30mm
screw
10
10
16
10
10
16
Step 12
Parts Needed- No.10 QTY 4
- No.16 QTY 2
Fix the Fascias (No.10) onto the front
and back of the building using
3x30mm screws per Fascia. Ensure to
screw through the fascias and into
the roof.
Fix the Shed diamond nials (No.16)
on top of the Fascias using 2x30mm
screws per nial.
16x30mm Screws
If you have purchased a Greenhouse,
do not x the fascias on either the front
or back, depending on which side you
want your Greenhouse.
If you have purchased a Greenhouse, please see
the Greenhouse instructions for construction.
8x6 Greenhouse with shed
10x6 Greenhouse with shed
12x6 Greenhouse with shed
It is ESSENTIAL that you apply wood
treatment immediately after the building
has been assembled.
AFTER TREATMENT:
score around protective
cover on glazing and
carefuly peel
covering back
¢
¡
¡
¡
¡
¡
¢
¡
¡¡
¢
£
¡
£
¤¥
¢
¤
1
2
3
4
5
6
7
8
9
¦
§
¥¡
2
1
¨
3
4
¦
¡
§
¡
¡
¤
¨
¢
§
12
¡
¡
¡
¤
¨
¢
Other manuals for 01DTSHAX0406SDFW-V1
1
Table of contents
Other Mercia Garden Products Garden House manuals
Mercia Garden Products
Mercia Garden Products 01OVLPA0510PB-V1 User manual
Mercia Garden Products
Mercia Garden Products 03HEL1008DDFW-V3 Instruction manual
Mercia Garden Products
Mercia Garden Products 01MODP0804-V2 User manual
Mercia Garden Products
Mercia Garden Products Rose Instruction manual
Mercia Garden Products
Mercia Garden Products 0619RANE0325FGSD3TW-V1 Instruction manual
Mercia Garden Products
Mercia Garden Products 05DTOVPN0305DD-V1 Instruction manual
Mercia Garden Products
Mercia Garden Products 01DTOVRA1006SDFW-V1 User manual
Mercia Garden Products
Mercia Garden Products 03DTSHCR0909FGD4TW-V1 Instruction manual
Mercia Garden Products
Mercia Garden Products 01PTOSBA0705SDFW-V1 Instruction manual
Mercia Garden Products
Mercia Garden Products 02GARA0806-V1-PEFC Instruction manual
Mercia Garden Products
Mercia Garden Products 01RAW1210DDOW-V3 Instruction manual
Mercia Garden Products
Mercia Garden Products 01OVLPA0806SDFW-V2 User manual
Mercia Garden Products
Mercia Garden Products 0634CSNE0404HGDD2SW-V1 Instruction manual
Mercia Garden Products
Mercia Garden Products 04GREEN0606SD-V5 User manual
Mercia Garden Products
Mercia Garden Products 06LOG002-V1 Instruction manual
Mercia Garden Products
Mercia Garden Products 10DTBARK0804-V1 User manual
Mercia Garden Products
Mercia Garden Products 03DTSHAX0608FGD4MW-V2 User manual
Mercia Garden Products
Mercia Garden Products 03DTSHHP0806HGD4MW-V1 User manual
Mercia Garden Products
Mercia Garden Products 01PTGRO0705-V2 Instruction manual
Mercia Garden Products
Mercia Garden Products 01PTGRO1208DD-V3 Instruction manual
Popular Garden House manuals by other brands
Palmako
Palmako FR44-4153-2 installation manual
Sunjoy
Sunjoy AUGUSTA WICKER GAZEBO L-GZ1190PST Assembly instruction
Outdoor Life Products
Outdoor Life Products NO2818 Assembly instructions
Lemeks
Lemeks Palmako Claudia FRY34-4232 installation manual
USP
USP DURAMAX 10.5 Ft WoodBridge Plus owner's manual
Palmako
Palmako Olaf EL18-3422-1 installation manual
