Meyer Formula F470 Owner's manual

6990633 (1-13) Printed in U.S.A. © Bobcat Company 2013
FORMULA MIXER
Models F355 • F470 • F585 • F700 • F815 • F1015 • F1215
PB-MIXER-19
Owner / Operator’s Manual
2019 Model Year & Later
10 / 2018

Meyer Manufacturing Corporation - 2 -
1.0 IMPORTANT INFORMATION
The mixer serial number plate is located on the left hand side of the mixing tub. The trailer serial number plate
(Model F585-F1460) is located on the left hand side of the trailer hitch.
Please enter the model, serial number and additional information in the space provided for future reference.
Always use your serial number when requesting information or when ordering parts.
HOW TO READ YOUR SERIAL NUMBER
Meyer Manufacturing Corporation
674 W. Business Cty Rd A
Dorchester, WI 54425
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.meyermfg.com
Model No.
Mixer Serial No.
Trailer Serial No.
Date of Purchase
Dealership
Dealership Phone No.
Mixer Body
Serial Number
Trailer Serial Number
Model Year / Vertical Mixer / Model / Sequence Of Build
VM 0700 201
Vertical Mixer Trailer / Model Year / Sequence Of Build
VMT 19 201
TRAILER (Model F585-F1215)
EXAMPLE: VMT19201
19
MIXER
EXAMPLE: 19VM0700201

1-800-325-9103
Formula Mixer Check List - 3 - www.meyermfg.com
2.0 PRE-DELIVERY & DELIVERY CHECK LIST
This Pre-Delivery & Delivery Check List must be gone through by the Selling Party and the Customer to validate the
Owner’s Registration Form.
Meyer Manufacturing Corporation
Phone: [phone] • Toll-Free: 1-800-325-9103 • P.O. Box 405 • Dorchester, WI 54425
PB Mixer Check List
All shields and guards are in place and securely
fastened.
All PTO shields turn freely.
All bolts and other fasteners are secure and tight.
All mechanisms operate trouble free.
All grease fittings have been lubricated, gear
boxes filled to proper levels, and all roller chains
are oiled. See “Lubrication” section of this
manual.
Cross Conveyor Belt or Chain are at proper
tension. See “Adjustments” section in this
manual.
All decals are in place and legible.
All stop/tail/turn lights work properly.
PRE-DELIVERY CHECK LIST
After the New Meyer Mixer has been completely set-up,
check to be certain it is in correct running order before
delivering it to the customer.
The following is a list of points to inspect:
Check off each item as you have made the proper
adjustments and found the item operating
satisfactorily. Any adjustments made, MUST be
according to specifications defined in this manual.
DELIVERY CHECK LIST
The following check list is an important reminder of
valuable information that MUST be passed on to the
customer at the time the unit is delivered.
Check off each item as you explain it to the
customer.
Explain to the customer that pre-delivery check
list was fully completed.
Give customer the Owner & Operator’s Manual.
Instruct to read and completely understand its
contents BEFORE attempting to operate the
mixer.
Explain and review with customer the New Meyer
mixer manufacturer’s warranty.
Show the customer where to find the serial
number on the implement.
Explain and review with the customer “Safety
Precautions” section of this manual.
Explain and review with customer the proper
“Start-up and Operating Procedures” sections of
this manual.
Explain and review with customer the
recommended loading and unloading
procedures.
Demonstrate the start-up and shutdown controls,
proper hydraulic hose storage and tip holder used
to keep system clean from contaminants.
Explain the importance of cross conveyor chain
or belt tension, and the need to watch and tighten
during the break-in period.
Explain that regular lubrication and proper
adjustments are required for continued proper
operation and long life of the mixer. Review with
the customer the “Lubrication” and “Adjustments”
sections of this manual.
Fully complete this “PRE-DELIVERY &
DELIVERY CHECK LIST” with the customer.

Meyer Manufacturing Corporation - 4 - Formula Mixer Check List
Meyer Manufacturing Corporation
674 W. Business Cty Rd A
Dorchester, WI 54425
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.meyermfg.com

1-800-325-9103
PB-MIXER-19 - 5 - www.meyermfg.com
3.0 INTRODUCTION
Congratulations on your purchase of a new Meyer farm equipment product. Undoubtedly you have given
much consideration to your purchase and we’re proud that you have selected Meyer. Pride in craftsmanship,
engineering and customer service have made Meyer products the finest in the farm equipment industry today.
There is no substitute for quality. That is why thousands of people like you have purchased Meyer farm
equipment. They felt it was the best equipment to serve their farming needs, now and in years to come. We
ask that you follow our policy of “safety first”, and we strongly suggest that you read through the Operator’s
& Parts manual before operating your Meyer farm equipment. Meyer Manufacturing Corporation wants to
thank you for not compromising quality. We are determined to offer excellence in customer service as well as
provide you with the very best value for your dollar.
Sincerely,
All Employees of
MEYER MANUFACTURING CORPORATION
When the PTO is referred to, it means power takeoff from the tractor.
The formula mixer may be referred to as mixer, implement, equipment or machine in this manual.
Manufacturer’s Statement: Meyer Manufacturing Corporation reserves the right to make improvements in design, or
changes in specifications at any time, without incurring any obligation to owners of units previously sold. This supersedes
all previous published instructions.
IMPORTANT: You are urged to study this manual and follow the instructions carefully. Your efforts will be
repaid in better operation and service as well as a savings in time and repair expense. Failure to read this
manual and understand the machine could lead to serious injury. If you do not understand instructions in
this manual, contact either your dealer or Meyer Manufacturing Corp. at Dorchester, WI 54425.
WARRANTY: At the front of this manual is the Owner’s Registration Form. Be sure your dealer has
completed this form and promptly forwarded a copy to Meyer Manufacturing to validate the
manufacturer’s warranty. The product model and serial number are recorded on this form and on the
inside of the front cover for proper identification of your Meyer equipment by your dealer and the
manufacturer when ordering repair parts. The serial number is stamped in the front left-hand side of the
mixing tub. On F700 model and larger the Trailer has a serial number located on the left hand side of the
hitch.

Meyer Manufacturing Corporation - 6 - PB-MIXER-19
FEATURES
OPTIONS
DESCRIPTION F355 F470 F585 F700 F815 F1015 F1215
Twin Mixing Augers STD STD STD STD STD STD STD
Replaceable Scrapers STD STD STD STD STD STD STD
Hardened Knives STD STD STD STD STD STD STD
Hay Stops STD STD STD STD STD STD STD
Ladder STD STD STD STD STD STD STD
Jack Stand STD STD STD STD STD STD STD
Torque Disconnect PTO’s STD STD STD STD STD STD STD
2-Speed (Electric Shift) N/A N/A STD STD STD STD STD
Straight Drive STD STD N/A N/A N/A N/A N/A
Heavy -Duty Gearboxes STD STD STD STD STD STD STD
Single Axle Trailer STD STD STD STD STD STD STD
DESCRIPTION F355 F470 F585 F700 F815 F1015 F1215
Tandem Axle Trailer N/A N/A OPT OPT OPT OPT OPT
Side Discharge Door Right/Left OPT OPT OPT OPT OPT OPT OPT
Front Discharge Door OPT OPT OPT OPT OPT OPT OPT
Rear Discharge Door OPT OPT OPT OPT OPT OPT OPT
Front Cross Conveyor OPT OPT OPT OPT OPT OPT OPT
Side Door Conveyor OPT OPT OPT OPT OPT OPT OPT
Viewing Platform N/A OPT OPT OPT OPT OPT OPT
Slide Tray OPT OPT OPT OPT OPT OPT OPT
Safety Chain OPT OPT OPT OPT OPT OPT OPT
Magnets OPT OPT OPT OPT OPT OPT OPT
Hay-Retention Ring OPT OPT OPT OPT OPT OPT OPT
Capacity Belt Extension OPT OPT OPT OPT OPT OPT OPT
Hardened Knives (Additional) OPT OPT OPT OPT OPT OPT OPT
Tank Liner OPT OPT OPT OPT OPT OPT OPT
Baffle Liner OPT OPT OPT OPT OPT OPT OPT

1-800-325-9103
PB-MIXER-19 - 7 - www.meyermfg.com
TABLE OF CONTENTS
1.0 IMPORTANT INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2.0 PRE-DELIVERY & DELIVERY CHECK LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.0 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4.0 MANUFACTURER’S WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5.0 SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5.1 SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5.2 SAFETY SIGNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
5.3 SHUTOFF & LOCKOUT POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
5.3.1 Shutoff & Lockout Power Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
6.0 PRE-OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.1 PRODUCT INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.1.1 General Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6.1.2 Before Loading The Formula Mixer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6.2 LIGHT HOOK-UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
6.3 HYDRAULIC HOOK-UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.4 PTO DRIVELINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
6.4.1 Drawbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
6.4.2 Cutout Clutch (F585-F1215 Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
6.4.3 Shear Bolt PTO, Primary (F355/F470) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
6.5 HITCHING TO TRACTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
6.5.1 Jack Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
6.6 START-UP AND SHUT-DOWN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
6.6.1 Start-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
6.6.2 Shut-Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
6.7 TRANSPORTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
6.7.1 Safety Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
6.7.2 Tire / Wheel Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
6.7.3 Brake Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
6.7.4 Tractor Towing Size Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
6.8 OPTIONAL EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
7.0 OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
7.1 GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
7.1.1 Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Meyer Manufacturing Corporation - 8 - PB-MIXER-19
7.2 LOADING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
7.2.1 Loading Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
7.3 MIXING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
7.4 PLATFORM OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
7.5 FOLDING LADDER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
7.6 UNLOADING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
7.7 UNHOOKING THE TRACTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
7.9 HAY STOP ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
7.9.1 Hay Stop Lock Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
7.10 MIXER TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
8.0 MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
8.1 LUBRICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
8.1.1 Daily or every 8-10 loads: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
8.1.2 Weekly: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
8.1.3 Monthly: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
8.1.4 Every 40 hours: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
8.1.5 50 hours: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
8.1.6 Semiannually (500 - 600 hours): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
8.1.7 Annually (1500 hours): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
8.1.8 Every Two Years or When Discolored: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
8.1.9 Gearbox Oil Change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
8.1.9.1 Planetary Gearbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
8.1.9.2 2-Speed Gearbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
8.2 ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
8.2.1 Side Discharge Conveyor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
8.2.2 Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
8.2.3 Front Discharge Conveyor - Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
8.2.4 Auger Scraper Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
8.2.5 Auger Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
8.2.6 PTO Cutout Clutch Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
8.2.7 Knives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
8.2.7.1 Knife Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
8.2.7.2 Adding Knives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
8.2.7.3 Knife Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
8.2.7.4 Knife Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
8.2.7.5 Replacing Damaged or Worn Knives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
8.3 STORING THE MIXER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
8.4 RETURNING THE MIXER TO SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
8.5 REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
8.5.1 Shutoff & Lockout Power Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

1-800-325-9103
PB-MIXER-19 - 9 - www.meyermfg.com
9.0 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
9.1 MODELS F355, F470, F585 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
9.2 MODELS F700, F815, F1015 AND F1215 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
MAINTENANCE RECORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Meyer Manufacturing Corporation - 10 - PB-MIXER-19

1-800-325-9103
PB-MIXER-19 - 11 - www.meyermfg.com
4.0 MANUFACTURER’S WARRANTY
MEYER FORMULA MIXER 4/2014
I. The “Owner’s Registration Form” must be completed in full and promptly returned to Meyer Mfg. Corp. for
this warranty to become both valid and effective. All warranties on New Meyer Mixers shall apply only to the
original retail customer from an authorized Meyer Mfg. Corp. dealership.
II. This warranty shall not apply to any Meyer Mixer which has been subjected to misuse, negligence, alteration,
accident, incorrect operating procedures, has been used for an application not designed for or pre-authorized
by Meyer in writing, has had the serial numbers altered, or which shall have been repaired with parts other
than those obtained through Meyer Mfg. Corp. Meyer is not responsible for the following: Depreciation or
damage caused by normal wear, lack of reasonable and proper maintenance, failure to follow the operator's
manual recommendations or normal maintenance parts and service. Meyer is not responsible for rental of
replacement equipment during warranty repairs, damage to a power unit (including but not limited to a truck
or tractor), loss of earnings due to equipment down time, or damage to equipment while in transit to or from
the factory or dealer.
III. Meyer Mfg. Corp. warrants New Meyer Mixer to be free from defects in material and workmanship under
recommended use and maintenance service, as stated in the operator’s and parts manuals, as follows:
A. Meyer Mfg. Corp. will repair or replace F.O.B. Dorchester, WI, as Meyer Mfg. Corp. elects, any
part of a new Meyer Mixer which is defective in material or workmanship:
i. Without charge for either parts or labor during the first (1) year from purchase date to the
original retail customer.
B. In addition to the above basic warranty, Meyer Mfg. Corp. will repair or replace F.O.B.
Dorchester, WI as Meyer Mfg. Corp. elects:
i. Any part of the following which is defective in material or workmanship (not neglect to
recommended use and service) with a “pro-rated” charge for parts only (not labor) during
the stated time period from date of purchase to the original retail customer. 1st year
100%, 2nd year 100%, 3rd year 50%, 4th year 25%, 5th year 10%
a. The Formula Mixer Planetary Gearbox. Meyer Part #'s 119-16-13.4-1,
119-18-13.92-1, 119-21-25.57-1, 119-32-24.8-1.
IV. COMMERCIAL USE: Coverage as in paragraph III.A.i. only, except warranty coverage is for (90) days for parts
and labor to the original commercial retail customer.
V. Repairs eligible for labor warranty must be made by Meyer Mfg. Corp. or an authorized Meyer dealership. The
original retail customer is responsible for any service call and/or transportation of the mixer to the dealership or
the factory for warranty service.
VI. Except as stated above, Meyer Mfg. Corp. shall not be liable for injuries or damages of any kind or nature,
direct, consequential, or contingent, to persons or property. This warranty does not extend to loss of crop or for
any other reasons.
VII. No person is authorized to give any other warranties or to assume any other obligation on Meyer Mfg. Corp.’s.
behalf unless made or assumed in writing by Meyer Mfg. Corp. This warranty is the sole and exclusive warranty
which is applicable in connection with the manufacture and sale of this product and Meyer Mfg. Corp.’s
responsibility is limited accordingly.
Purchased Product Warranty:
This warranty does not apply to component parts not manufactured by Meyer such as but not limited to wheels, tires,
tubes, PTO shafts, clutches, hydraulic cylinders, scales, tarps, etc.

Meyer Manufacturing Corporation - 12 - PB-MIXER-19

1-800-325-9103
PB-MIXER-19 - 13 - www.meyermfg.com
5.0 SAFETY
Meyer Mfg. Corp. equipment is manufactured with operator safety in mind. Located on the equipment are various safety
signs to aid in operation and warn of hazardous areas. Pay close attention to all safety signs on the equipment.
Carefully follow the operating and maintenance instructions in this manual and all applicable safety laws. Failure to follow
all safety procedures may result in serious injury or death.
Before attempting to operate this equipment, read and study the following safety information. In addition, make
sure that every individual who operates or works with the equipment, whether family member or employee, is
familiar with these safety precautions.
Meyer Mfg. Corp. provides guards for exposed moving parts for the operator’s protection; however, some areas
cannot be guarded or shielded in order to assure proper operation. The operator’s manual and safety signs on
the equipment itself warn you of hazards and must be read and observed closely!
Danger, Warning, Caution, and instructional decals and plates are placed on the equipment to protect anyone working on
or around this equipment, as well as the components of the equipment. All personnel operating or maintaining this
equipment must familiarize themselves with all Danger, Warning, Caution, and instructional decals and plates.
This symbol is used to call attention to instructions
concerning personal safety. Be sure to observe and
follow these instructions. Take time to be careful!
The signal word DANGER on the machine and in the manual identifies
a hazardous situation which, if not avoided, WILL result in death or
serious injury.
The signal word WARNING on the machine and in the manual
indicates a potentially hazardous situation which, if not avoided,
COULD result in death or serious injury.
The signal word CAUTION on the machine and in the manual
indicates a potentially hazardous situation which, if not avoided, MAY
result in minor or moderate injury. It may also be used to alert against
unsafe practices.
This notice identifies procedures which must be followed to avoid
damage to the machine.

Meyer Manufacturing Corporation - 14 - PB-MIXER-19
5.1 SAFETY PRECAUTIONS
• DO NOT allow anyone to operate, service, inspect or otherwise handle this equipment until all operators have read
and understood all of the instructional materials in this Operator’s And Parts Manual and have been properly trained
in its intended usage.
• For an operator to be qualified, he or she must not use drugs or alcohol which impair alertness or coordination while
working. An operator who is taking prescription drugs must get medical advice to determine if he or she can safely
operate a machine and the equipment.
• Make sure all personnel can READ and UNDERSTAND all safety signs.
• DO NOT allow minors (children) or inexperienced persons to operate this equipment.
• DO NOT operate until all shields and guards are in place and securely fastened.
• DO NOT step up on any part of the equipment that is not designated as a ladder or viewing platform at any time.
• DO NOT adjust, clean or lubricate while the equipment is in motion.
• Inspect when first delivered and regularly thereafter; that all connections and bolts are tight and secure before
operating.
• Know how to stop operation of the equipment before starting it!
• Make certain everyone is clear of the equipment before applying power.
• Keep hands, feet and clothing away from moving parts. Loose or floppy clothing should not be worn by the operator.
• Observe all applicable traffic laws when transporting on public roadways (where legal to do so). Check local laws for
all highway lighting and marking requirements.
• Shut off and lock out power before adjusting, servicing, maintaining or clearing an obstruction from this machine. (See
5.3 SHUTOFF & LOCKOUT POWER on page 24.)
• Always enter curves or drive up or down hills at a low speed and at a gradual steering angle.
• Never allow riders on either tractor / truck or equipment.
• Keep tractor / truck in a lower gear at all times when traveling down steep grades.
• Stay away from overhead power lines. Electrocution can occur without direct contact.
• Use only properly rated undercarriage and tires.
All individuals who will operate this equipment must read
and completely understand this Operator’s And Parts
Manual. Operator must have instructions before operating
the machine. Untrained operators can cause injury or death.

1-800-325-9103
PB-MIXER-19 - 15 - www.meyermfg.com
Safety Precautions For Tractor Towed Units:
• Do not exceed 20 mph (32 kph). Reduce speed on rough roads and surfaces.
• Always install a SMV emblem on pull-type equipment when transporting on roadways and keep clean and bright.
• Always yield to oncoming traffic in all situations and move to the side of the road so any following traffic may pass.
Safety Precautions For Truck Mounted Units:
• Comply with state and local laws governing highway safety and movement of machinery on roadways.
Safety Precautions For Hydraulic System:
• Check hydraulic tubes, hoses and fittings for damage and leakage. Never use hands to check for leaks. Hydraulic
tubes and hoses must be properly routed and have adequate support and secure clamps. Tighten or replace any parts
that show leakage.
• Always clean fluid spills. Do not use gasoline or diesel fuel for cleaning parts. Use commercial nonflammable solvents.

Meyer Manufacturing Corporation - 16 - PB-MIXER-19
5.2 SAFETY SIGNS
Read all safety signs on the equipment and in this manual. Keep all
safety signs clean and replace any damaged or missing safety signs
before operating the equipment. Do Not remove any safety signs.
Safety signs are for operator protection and information.
To prevent serious injury or death:
Read and understand owner’s manual
before using. Review safety precautions
annually.
Observe all applicable traffic laws when
transporting on public roadways (where
legal to do so). Check local laws for all
highway lighting and marking requirements.
Securely attach to towing unit. Use a
high strength appropriately sized hitch
pin with a mechanical retainer and
attach safety chain.
Do not exceed the chassis or tire load
rating. Maximum gross weight is the
lesser of the two.
Do not exceed 20 mph (33 kph).
Slow down for corners and rough terrain.
Do not drink and drive.
No riders allowed when transporting.
Before moving running gear, be sure
required lights and reflectors are
installed and working.
Before maintenance or repair, stop
vehicle, set tractor parking brake,
and remove ignition key.
Place safety stands under frame and
chock wheels before working on tires or
running gear.
Maintain wheel bolts at torque as
recommended in the manual.
If equipped with brakes, maintain proper
adjustment.
46-0800-8 1
CAUTION
FRONT OF MIXER
PART NO. 46-0004-2
6
2
1
4
3
5
7
PART NO. 46-0800-8
1
PART NO. 46-3600-9
2
PART NO. 46-0800-6
3
6
4
PART NO. 46-3600-6
PART NO. 46-0800-7
5
PART NO. 46-3600-2
(Located on trailer frame underneath housing)
7

1-800-325-9103
PB-MIXER-19 - 17 - www.meyermfg.com
CAUTION
46-0001-62 1
Use Flashing Warning
Lights when transporting
on ALL highways (public
roadways) at ALL times.
EXCEPT
WHEN PROHIBITED BY LAW!
(Check w/local law enforcement)
By all State and Federal laws, implement lights
do not replace the SMV (Slow-Moving Vehicle)
Identification Emblem. All towed agricultural
vehicles must display SMV Emblems when
traveling LESS than 20 mph (32 kph).
FRONT OF MIXER
1
2
3
4
5
PART NO. 46-0001-213
1
PART NO. 46-8500-7
2
3
PART NO. 46-0001-35
PART NO. 46-0001-62
4
5
PART NO. 46-0001-22

Meyer Manufacturing Corporation - 18 - PB-MIXER-19
FRONT OF MIXER
1
2
3
PART NO. 46-0001-210
1
PART NO. 46-0001-205
2
PART NO. 46-0001-213
3

1-800-325-9103
PB-MIXER-19 - 19 - www.meyermfg.com
1
PART NO. 46-0001-211
1
LEFT SIDE OF MIXER
PART NO. 46-0001-212
(Located under mixing tub)

Meyer Manufacturing Corporation - 20 - PB-MIXER-19
RIGHT SIDE OF MIXER
1
3
3
2
4
3
PART NO. 46-0001-213
1
PART NO. 46-0001-211
PART NO. 46-0001-212
(Located under mixing tub)
2
PART NO. 46-0001-206
(Both sides on some models)
WARNING
OIL INJECTION HAZARD
RELIEVE PRESSURE BEFORE
SERVICING.
DO NOT CHECK WITH HANDS.
IF INJURED SEEK EMERGENCY
MEDICAL ATTENTION.
46-8500-7 1
PART NO. 46-8500-7
34
(Behind Belting - Not Shown)