Meyer 9500 Series Owner's manual

6990633 (1-13) Printed in U.S.A. © Bobcat Company 2013
9500
Crop Max 9520 • 9524 • 9530 Series
Attachment Models S100 • S200 • S300 • S400
PB-9500
Owner / Operator’s Manual
1 / 2022 Starting 2008 Model Year

Meyer Manufacturing Corporation - 2 - PB-9500
1.0 IMPORTANT INFORMATION
The spreader body serial number plate is located on the front left hand side.
The attachment serial number is located on the left hand side of the frame on the attachment.
Please enter the model, serial number and additional information in the space provided for future reference.
Always use your serial number when requesting information or when ordering parts.
Meyer Manufacturing Corporation
674 W. Business Cty Rd A
Dorchester, WI 54425
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.meyermfg.com
Prior to 2016 Model
Year Spreader Body
Location
Prior to 2016 Model
Year Attachment
Location
Model No.
Spreader Body Serial No.
Attachment Serial No.
Date of Purchase
Dealership
Dealership Phone No.
EXAMPLE: 1595201
Model Year / Model / Sequence Of Build
15 95 201
EXAMPLE: S215001
Model / Model Year / Sequence Of Build
S2 15 001
SPREADER BODY ATTACHMENT
2016 Model Year And
Later Spreader Body
Location
HOW TO READ YOUR SERIAL NUMBER
2016 Model Year And
Later Attachment
Location

1-800-325-9103
9500 Check List - 3 - www.meyermfg.com
2.0 PRE-DELIVERY & DELIVERY CHECK LIST
This Pre-Delivery & Delivery Check List must be gone through by the Selling Party and the Customer to validate the
Owner’s Registration Form.
Meyer Manufacturing Corporation
Phone: [phone] • Toll-Free: 1-800-325-9103 • P.O. Box 405 • Dorchester,
9500 Check List
All shields and guards are in place and securely
fastened.
All bolts and other fasteners are secure and tight.
All mechanisms operate trouble free.
All grease fittings have been lubricated, gear
boxes filled to proper levels, and all roller chains
are oiled. See “Lubrication” section of this
manual.
PTO shields turn freely.
Main Apron Chains are at proper tension. See
“Adjustments” section in this manual.
All roller chain springs adjusted properly for
automatic tensioning. See “Adjustments” section
in this manual.
Lights are positioned to be visible from the rear.
All stop/tail/turn lights work properly.
Masking is removed from SMV decal on pull-type
units.
All decals are in place and legible.
PRE-DELIVERY CHECK LIST
After the New Meyer Crop Max has been completely
set-up, check to be certain it is in correct running order
before delivering it to the customer.
The following is a list of points to inspect:
Check off each item as you have made the proper
adjustments and found the item operating
satisfactorily. Any adjustments made, MUST be
according to specifications defined in this manual.
DELIVERY CHECK LIST
The following check list is an important reminder of
valuable information that MUST be passed on to the
customer at the time the unit is delivered.
Check off each item as you explain it to the
customer.
Explain to the customer that pre-delivery check
list was fully completed.
Give customer the Owner & Operator’s Manual.
Instruct to read and completely understand its
contents BEFORE attempting to operate the
Crop Max.
Explain and review with customer the New Meyer
Crop Max manufacturer’s warranty.
Show the customer where to find the serial
number on the implement.
Explain and review with the customer “Safety
Precautions” section of this manual.
Explain and review with customer the proper
“Start-up and Operating Procedures” sections of
this manual.
Demonstrate the PTO Shaft Locking Device and
proper PTO shaft storage. Also, demonstrate
proper hydraulic hose storage and tip holder used
to keep system clean from contaminants.
Explain that regular lubrication and proper
adjustments are required for continued proper
operation and long life of the Crop Max. Review
with the customer the “Lubrication” and
“Adjustments” sections of this manual.
Explain and review with customer the
recommended loading and unloading procedures
for different types of manure.
Fully complete this “PRE-DELIVERY &
DELIVERY CHECK LIST” with the customer.

Meyer Manufacturing Corporation - 4 - 9500 Check List
Meyer Manufacturing Corporation
674 W. Business Cty Rd A
Dorchester, WI 54425
Phone: [phone]
Fax: [phone]
Email: [email protected]
Website: www.meyermfg.com

1-800-325-9103
PB-9500 - 5 - www.meyermfg.com
3.0 INTRODUCTION
Congratulations on your purchase of a new Meyer farm equipment product. Undoubtedly you have given much
consideration to your purchase and we’re proud that you have selected Meyer. Pride in craftsmanship, engineering
and customer service have made Meyer products the finest in the farm equipment industry today.
There is no substitute for quality. That is why thousands of people like you have purchased Meyer farm equipment.
They felt it was the best equipment to serve their farming needs, now and in years to come. We ask that you follow
our policy of “safety first”, and we strongly suggest that you read through the “Owner / Operator’s Manual & Parts
Book” before operating your Meyer farm equipment. Meyer Manufacturing Corporation wants to thank you for not
compromising quality. We are determined to offer excellence in customer service as well as provide you with the very
best value for your dollar.
Sincerely,
All Employees of
MEYER MANUFACTURING CORPORATION
The Model 9500 Crop Max is available as a truck or an ag. cart mounted unit or mounted to an ag cart or wagon running
gear pulled and powered by a farm tractor.
When the PTO is referred to, it means power take off from the truck.
The Model 9500 Crop Max may be referred to as 9500, Crop Max, spreader or implement in this manual.
Manufacturer’s Statement: Meyer Manufacturing Corporation reserves the right to make improvements in design, or
changes in specifications at any time, without incurring any obligation to owners of units previously sold. This supersedes
all previous published instructions.
IMPORTANT: You are urged to study this manual and follow the instructions carefully. Your efforts will be
repaid in better operation and service as well as a savings in time and repair expense. Failure to read this
manual and understand the machine could lead to serious injury. If you do not understand instructions in
this manual, contact either your dealer or Meyer Manufacturing Corp. at Dorchester, WI 54425.
WARRANTY: At the front of this manual is an “Owner’s Registration Form”. Be sure your dealer has
completed this form and promptly forwarded a copy to Meyer Manufacturing to validate the manufacturer’s
warranty. The product model and serial number are recorded on this form and on the inside of the front
cover for proper identification of your Meyer Crop Max Spreader by your dealer and the manufacturer
when ordering repair parts. The serial number is stamped in the front upright of the left-hand side.
REPAIR PARTS: At the back of this manual is the repair parts section. All replacement parts are to be
obtained from or ordered through your Meyer dealership. When ordering repair parts, refer to the parts
section and give complete information including quantity, correct part number, detailed description and
even model number and serial number of the Crop Max which needs repair parts.

Meyer Manufacturing Corporation - 6 - PB-9500
FEATURES
OPTIONS
DESCRIPTION 9520
PULL
TYPE
9520
TRUCK
MOUNT
9524
PULL
TYPE
9524
TRUCK
MOUNT
9530
PULL
TYPE
9530
TRUCK
MOUNT
Front 36” Folding Guard/Deflect STD STD STD STD STD STD
Transport Lights w/Cord STD STD STD STD STD STD
Reversing Apron Package STD STD STD STD STD STD
DESCRIPTION 9520
PULL
TYPE
9520
TRUCK
MOUNT
9524
PULL
TYPE
9524
TRUCK
MOUNT
9530
PULL
TYPE
9530
TRUCK
MOUNT
Rear Attach S-100/200/300/400 OPT OPT OPT OPT OPT OPT
Sileage Extension Package OPT 36” OPT 36” OPT 36” OPT 36” OPT 36” OPT 36”
Scale Packages OPT OPT OPT OPT OPT OPT
Nutrient Tracking Management
Solutions
OPT OPT OPT OPT OPT OPT
Fender Flare Package OPT N/A OPT N/A OPT N/A

1-800-325-9103
PB-9500 - 7 - www.meyermfg.com
TABLE OF CONTENTS
1.0 IMPORTANT INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.0 PRE-DELIVERY & DELIVERY CHECK LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.0 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4.0 MANUFACTURER’S WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5.0 SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5.1 SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.2 SAFETY SIGNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
5.3 SHUTOFF & LOCKOUT POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
5.3.1 Shutoff & Lockout Power Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
6.0 PRE-OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
6.1 STATIC INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
6.2 LIGHT HOOK-UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
6.3 HYDRAULIC HOOK-UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
6.4 PTO DRIVELINE (S100 / S200 / S300) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
6.5 TRACTOR DRAWBAR SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
6.6 S100 EXPELLER ATTACHMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.6.1 Swing Arm End Gate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.6.2 Vertical Slide End Gate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.7 S200 EXPELLER ATTACHMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.8 S300 EXPELLER ATTACHMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.9 S400 GRAIN HOPPER ATTACHMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6.10 HITCHING TO TRACTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6.10.1 Model S100, S200 And S300 Swing Arm End Gate . . . . . . . . . . . . . . . . . . . . . . 27
6.10.2 Model S100 With Vertical Slide End Gate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.10.3 Model S400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.11 START-UP AND SHUT-DOWN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6.11.1 Start-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
6.11.2 Shut-Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
6.12 OPERATIONAL CHECKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6.13 TRANSPORTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
6.13.1 Safety Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
6.13.2 Brake Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Meyer Manufacturing Corporation - 8 - PB-9500
6.13.3 Tractor Towing Size Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
6.14 ATTACHMENT UNIT CHANGE OVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
6.14.1 Hydraulic Disconnect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
6.14.2 Attachment Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
6.14.3 Attachment Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
6.14.4 S400 Grain Hopper Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
7.0 OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
7.1 LOADING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
7.2 UNLOADING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
7.2.1 Unloading For Slide End Gate (S100 Attachment) . . . . . . . . . . . . . . . . . . . . . . . .40
7.2.2 Unloading For Swing Arm End Gate (S100, S200 And S300 Attachments) . . . . .41
7.2.3 Unloading Grain (S400 Attachment) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
7.2.4 PTO Cutout Clutch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
7.3 SHUT DOWN (S100, S200 AND S300 ATTACHMENTS) . . . . . . . . . . . . . . . . . . . . . . . .42
7.4 SHUT DOWN (S400 ATTACHMENT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
7.5 FREEZING WEATHER OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
7.6 REVERSE APRON FEATURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
7.6 UNHOOKING THE TRACTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
8.0 MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
8.1 LUBRICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
8.1.1.1 Daily Lubrication (Every 8-10 loads*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
8.1.1.2 Weekly Lubrication (Every 65-70 hours*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
8.1.1.3 Monthly Lubrication (Every 260-300 Loads*) . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
8.1.2 Truck Mount Mechanical Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
8.1.2.1 Daily Lubrication (Every 8-12 loads*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
8.1.2.2 Monthly Lubrication (Every 260-300 loads*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
8.2 ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
8.2.1 Apron Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
8.2.2 Attachment Spread Pattern Adjustment
(S100, S200) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
8.2.3 Beater Drive Chains (S100/S300) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
8.2.4 Timing of Spinners (S200) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
8.2.5 Balance of Spinners (S100-S200) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
8.2.6 PTO Cutout Clutch Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
8.3 STORING THE SPREADER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
8.4 RETURNING THE SPREADER TO SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
9.0 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
MAINTENANCE RECORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

1-800-325-9103
PB-9500 - 9 - www.meyermfg.com
4.0 MANUFACTURER’S WARRANTY
MEYER 9500 Crop Max Spreader
6/2014
I. The “Product Registration & Inspection Certificate” along with the original billing invoice “Owner’s
Registration Form” must be completed in full and promptly returned to Meyer Mfg. Corp. for this
warranty to become both valid and effective. All warranties on New Meyer Crop Max Spreaders shall
apply only to the original retail customer from an authorized Meyer Mfg. Corp. dealership.
II. This warranty shall not apply to any Meyer Crop Max Spreader which has been subjected to misuse,
negligence, alteration, accident, incorrect operating procedures, or which shall have been repaired with
parts other than those obtained through Meyer Mfg. Corp.
III. Meyer Mfg. Corp. warrants New Crop Max Spreaders to be free from defects in material and
workmanship under recommended use and maintenance service, as stated in the Owners/Operator's
Manual and Parts Book, as follows:
A. Meyer Mfg. Corp. will repair or replace F.O.B. Dorchester, WI, as Meyer Mfg. Corp. elects,
any part of a new Crop Max Spreader which is defective in material or workmanship:
i. Without charge for either parts or labor during the first (1) year from purchase date
to the original retail customer.
B. In addition to the above basic warranty, Meyer Mfg. Corp. will repair or replace F.O.B.
Dorchester, WI as Meyer Mfg. Corp. elects:
IV. COMMERCIAL USE: Coverage as in paragraph III.A.i. ONLY, except warranty coverage is for (90) days
for parts and labor to the original commercial retail customer.
V. Repairs eligible for labor warranty must be made by Meyer Mfg. Corp. or an authorized Meyer dealership.
The original retail customer is responsible for the transportation of the spreader to the dealership for
warranty service or for any service call expenses.
VI. Except as stated above, Meyer Mfg. Corp. shall not be liable for injuries or damages of any kind or nature,
direct, consequential, or contingent, to persons or property. This warranty does not extend to loss of crop
or for any other reasons.
VII. No person is authorized to give any other warranties or to assume any other obligation on Meyer Mfg.
Corp.’s. behalf unless made or assumed in writing by Meyer Mfg. Corp. This warranty is the sole and
exclusive warranty which is applicable in connection with the manufacture and sale of this product and
Meyer Mfg. Corp.’s responsibility is limited accordingly.
VIII. This warranty is effective on all sales of Meyer Crop Max Spreaders made after June 1, 2008.
Purchased Product Warranty:
This warranty does not apply to component parts not manufactured by Meyer such as but not limited to wheels, tires,
tubes, PTO shafts, clutches, hydraulic cylinders, scales, tarps, etc.
i. Any part of the following which is defective in material or workmanship (not neglect
to recommended use and service) with a “pro-rated” charge for parts only (not labor)
during the stated time period from date of purchase to the original retail customer:
a. Seven (7) Years: After a period of (1) year, the spreader tank body is
warranted against rust-through for an additional period of (6) years. (Pro-
Rated Parts Only). Parts included, front and rear end panels, side panels.

Meyer Manufacturing Corporation - 10 - PB-9500

1-800-325-9103
PB-9500 - 11 - www.meyermfg.com
5.0 SAFETY
The Meyer Crop Max Spreader is manufactured with operator safety in mind. Located on the spreader are various safety
signs to aid in operation and warn of danger or caution areas. Pay close attention to all safety signs on the spreader.
Carefully follow the operating and maintenance instructions in this manual and all applicable safety laws. Failure to follow
all safety procedures may result in serious injury or death.
Before attempting to operate this spreader, read and study the following safety information. In addition, make
sure that every individual who operates or works with the spreader, whether family member or employee, is
familiar with these safety precautions.
Meyer Mfg. Corp. provides guards for exposed moving parts for the operator’s protection; however, some areas
cannot be guarded or shielded in order to assure proper operation. The operator’s manual and safety signs on
the spreader itself warn you of dangers and must be read and observed closely!
Danger, Warning, Caution, and instructional decals and plates are placed on the equipment to protect anyone working on
or around this machine, as well as the components of the machine. All personnel operating or maintaining this equipment
must familiarize themselves with all Danger, Warning, Caution, and instructional decals and plates.
This symbol is used to call attention to instructions
concerning personal safety. Be sure to observe and
follow these instructions. Take time to be careful!
The signal word DANGER on the machine and in the manual identifies
a hazardous situation which, if not avoided, WILL result in death or
serious injury.
The signal word WARNING on the machine and in the manual
indicates a potentially hazardous situation which, if not avoided,
COULD result in death or serious injury.
The signal word CAUTION on the machine and in the manual indicates
a potentially hazardous situation which, if not avoided, MAY result in
minor or moderate injury. It may also be used to alert against unsafe
practices.
This notice identifies procedures which must be followed to avoid
damage to the machine.

Meyer Manufacturing Corporation - 12 - PB-9500
5.1 SAFETY PRECAUTIONS
• DO NOT allow anyone to operate, service, inspect or otherwise handle this spreader until all operators have read and
understand all of the instructional materials in this Operator’s And Parts Manual and have been properly trained in its
intended usage.
• For an operator to be qualified, he or she must not use drugs or alcohol which impair alertness or coordination while
working. An operator who is taking prescription drugs must get medical advice to determine if he or she can safely
operate a machine and the equipment.
• Make sure all personnel can READ and UNDERSTAND all safety signs.
• DO NOT allow minors (children) or inexperienced persons to operate this spreader.
• DO NOT operate until all shields and guards are in place and securely fastened.
• DO NOT step up on any part of the spreader at any time.
• DO NOT adjust, clean or lubricate while the spreader is in motion.
• Inspect when first delivered and regularly thereafter; that all connections and bolts are tight and secure before
operating.
• Know how to stop operation of the spreader before starting it!
• Make certain everyone is clear of the spreader before applying power.
• Keep hands, feet and clothing away from moving parts. Loose or floppy clothing should not be worn by the operator.
• Observe all applicable traffic laws when transporting on public roadways (where legal to do so). Check local laws for
all highway lighting and marking requirements.
• Shut off and lock out power before adjusting, servicing, maintaining or clearing an obstruction from this machine. (See
5.3 SHUTOFF & LOCKOUT POWER on page 19.)
• Always enter curves or drive up or down hills at a low speed and at a gradual steering angle.
• Never allow riders on either tractor / truck or equipment.
• Keep tractor / truck in a lower gear at all times when traveling down steep grades.
• Maintain proper brake settings at all times (if equipped).
• Stay away from overhead power lines. Electrocution can occur without direct contact.
• Use only properly rated undercarriage and tires.
All individuals who will operate this Spreader must read and
completely understand this Operator’s And Parts Manual.
Operator must have instructions before operating the
machine. Untrained operators can cause injury or death.

1-800-325-9103
PB-9500 - 13 - www.meyermfg.com
Safety Precautions For Tractor Towed Units:
• Do not exceed 20 mph (32 kph). Reduce speed on rough roads and surfaces.
• Always install a SMV emblem on pull-type equipment when transporting on roadways and keep clean and bright.
• Always yield to oncoming traffic in all situations and move to the side of the road so any following traffic may pass.
Safety Precautions For Truck Mounted Units:
• Comply with state and local laws governing highway safety and movement of machinery on roadways.
Safety Precautions For Hydraulic System:
• Check hydraulic tubes, hoses and fittings for damage and leakage. Never use hands to check for leaks. Hydraulic
tubes and hoses must be properly routed and have adequate support and secure clamps. Tighten or replace any parts
that show leakage.
• Always clean fluid spills. Do not use gasoline or diesel fuel for cleaning parts. Use commercial nonflammable solvents.

Meyer Manufacturing Corporation - 14 - PB-9500
5.2 SAFETY SIGNS
Read all safety signs on the spreader and in this manual. Keep all
safety signs clean and replace any damaged or missing safety signs
before operating the equipment. Do not remove any safety signs.
Safety signs are for operator protection and information.
4
3
1
5
3
2
6
7
8
9
5
PART NO. 46-0001-35
1
2
3
FRONT OF SPREADER
PART NO. 46-0001-62 (Pull Type Only)
PART NO. 46-0001-4
PART NO. 46-0001-22
PART NO. 46-8500-7
9
PART NO. 46-3600-2
(Located Under Shield)
4
7
PART NO. 46-0001-13
8
PART NO. 46-3600-9
6
PART NO. 46-0004-2
TO PREVENT SERIOUS INJURY OR DEATH
DO NOT start, operate, or work on this machine without first carefully reading and
thoroughly understanding the entire contents of the operators manual. (Require the
same of all personnel who will operate this machine.)
If operators manual is lost, contact your nearest Meyer Dealership or write or call:
Please give your name, address, phone number, model and serial number of your
machine. A manual will be furnished.
If you have any questions about operation or adjustments, and maintenance of this
machine, contact your Meyer Dealership or Meyer Mfg., Corp. before starting or
continuing the operation of this machine.
•
•
•
MEYER MFG., CORP.
P.O. BOX 405 • Dorchester, WI 54425-0405
Phone [phone]
CAUTION
46-0001-35 1

1-800-325-9103
PB-9500 - 15 - www.meyermfg.com
23
4
1
1
LEFT REAR SIDE OF SPREADER
4
PART NO. 46-9500-2
2
PART NO. 46-0001-205
PART NO. 46-8500-7
3
WARNING
46-9500-17 1
ROTATING PART
HAZARD
DISENGAGE PTO
Before Starting The
Service Noted Below
Only Re-engage PTO
From The Tractor/Truck
46-9500-2 1
CRUSH HAZARD
SUPPORT/BLOCK
GATE BEFORE
CLEANING OR
SERVICING!
PART NO. 46-9500-17

Meyer Manufacturing Corporation - 16 - PB-9500
22
1
1
MODEL S200
SIDE OF SPREADER
PART NO. 46-0001-205
2
11
SIDE OF SPREADER
3
PART NO. 46-3600-1
3
PART NO. 46-9100-4

1-800-325-9103
PB-9500 - 17 - www.meyermfg.com
1
MODEL S100
2
5
2
MODEL S200
PART NO. 46-0001-4
1
3
4
6
7
6
2
4
MODEL S100
PART NO. 46-9500-4
4
PART NO. 46-9500-1
3
PART NO. 46-3600-1
PART NO. 46-0001-26
(Located Under Shield)
5
PART NO. 46-9500-5
6
7
PART NO. 46-9500-22
DANGER
46-9500-5 1
ENTANGLEMENT
HAZARD
HIGH SPEED ROTATING
PARTS
KEEP HANDS AND FEET
CLEAR WHILE IN MOTION

Meyer Manufacturing Corporation - 18 - PB-9500
1
MODEL S300
2
2
1
1
2
PART NO. 46-0001-4
PART NO. 46-9500-5
NOTE: Safety Signs illustrated on implement are typical for Model S400 also.
DANGER
46-9500-5 1
ENTANGLEMENT
HAZARD
HIGH SPEED ROTATING
PARTS
KEEP HANDS AND FEET
CLEAR WHILE IN MOTION

1-800-325-9103
PB-9500 - 19 - www.meyermfg.com
5.3 SHUTOFF & LOCKOUT POWER
Any individual that will be adjusting, servicing, maintaining, or clearing an obstruction from this machine needs
to ensure that this machine stays safely “OFF” until the adjustment, service, or maintenance has been
completed, or when the obstruction has been cleared, and that all guards, shields, and covers have been
restored to their original position. The safety of all individuals working on or around this machine, including
family members, are affected. The following procedure will be referred to throughout this manual, so be familiar
with the following steps.
5.3.1 Shutoff & Lockout Power Recommendations
1. Think, Plan and Check
a. Think through the entire procedure and identify all the steps that are required.
b. Plan what personnel will be involved, what needs to be shut down, what guards / shields need to be removed, and
how the equipment will be restarted.
c. Check the machine over to verify all power sources and stored energy have been identified including engines,
hydraulic and pneumatic systems, springs and accumulators, and suspended loads.
2. Communicate - Let everyone involved, including those working on or around this machine, that work is being done
which involves keeping this machine safely “OFF”.
3. Power Sources
a. LOCKOUT - Shut off engines and take the key, or physically lock the start/on switch or control. Disconnect any
power sources which are meant to be disconnected (i.e. electrical, hydraulic, and PTO of pull-type units).
b. TAGOUT - Place a tag on the machine noting the reason for the power source being tagged out and what work is
being done. This is particularly important if the power source is not within your sight and/or will need to be isolated
for a longer period of time.
4. Stored Energy - Neutralize all stored energy from its power source. Ensure that this machine is level, set the parking
brake, and chock the wheels. Disconnect electricity, block moveable parts, release or block spring energy, release
pressure from hydraulic and pneumatic lines, and lower suspended parts to a resting position.
5. Test - Do a complete test and personally double check all of the above steps to verify that all of the power sources are
actually disconnected and locked out.
6. Restore Power - When the work has been completed, follow the same basic procedures, ensuring that all individuals
working on or around this machine are safely clear of the machine before locks and tags are removed and power is
restored.
It is important that everyone who works on this equipment is properly
trained to help ensure that they are familiar with this procedure and
that they follow the steps outlined above. This manual will remind you
when to Shutoff & Lockout Power.

Meyer Manufacturing Corporation - 20 - PB-9500