MF DIGITAL DIRECTOR series Manual

Director Series
Director PRO Series
Duplication Publishing
System Operator’s Guide

DIRECTOR Series Operator’s Guide
Document Revision: 06/15/05
Page 1
This Page Left Blank

DIRECTOR Series Operator’s Guide
Document Revision: 06/15/05
Page 2
Table of Contents
WELCOME TO THE DIRECTOR .......................................................................................................................... 5
COPYRIGHT NOTICE ................................................................................................................................................... 5
RECORDER WARRANTY POLICY................................................................................................................................5
PIRACY.......................................................................................................................................................................5
CORPORATE HEADQUARTERS: ................................................................................................................................... 5
ABOUT MF DIGITAL...............................................................................................................................................6
WHAT TO EXPECT FROM YOUR MF DIGITAL DIRECTOR DUOLICATION PUBLISHING SYSTEM............................... 6
ABOUT THIS MANUAL...........................................................................................................................................6
INSTALLING THE DIRECTOR EC........................................................................................................................7
WHAT’S IN THE BOX ................................................................................................................................................. 7
PACKING MATERIALS.................................................................................................................................................7
THE BEST PLACE TO PUT THE DIRECTOR .............................................................................................................. 8
SAFETY PRECAUTIONS ...............................................................................................................................................8
REMOVING PACKING RESTRAINTS..................................................................................................................9
PINSTALLING THE MONITOR,KEYBOARD AND MOUSE.............................................................................................9
INSTALLING THE MONITOR, KEYBOARD AND MOUSE.............................................................................. 9
CONNECTING THE MONITOR......................................................................................................................................9
CONNECTING THE MOUSE AND KEYBOARD ..............................................................................................................9
INSTALLING THE NETWORK CABLE..............................................................................................................10
CONNECTING THE NETWORK CABLE .......................................................................................................................10
INSTALLING FIREWIRE CABLES......................................................................................................................11
STARTING THE DIRECTOR EC FOR THE FIRST TIME...............................................................................12
POWER CONNECTION AND SETTINGS....................................................................................................................... 12
STARTING UP........................................................................................................................................................... 13
APPLICATION STARTUP .....................................................................................................................................14
STARTING THE DIRECTOR APPLICATION...............................................................................................................14
DIRECTOR APPLICATION LAYOUT........................................................................................................................ 14
DIRECTOR APPLICATION CONFIGURATION ........................................................................................................... 15
PRINTER DRIVER (REQUIRED).................................................................................................................................. 16
OPERATOR’S EMAIL ADDRESS (OPTIONAL).............................................................................................................. 16
RECORDING SPEED (REQUIRED)............................................................................................................................... 17
ASYNCHRONOUS MODE (REQUIRED)....................................................................................................................... 17
DESCRIPTION.........................................................................................................................................................18
DISABLED.................................................................................................................................................................18
JOBS=SYNCHRONOUS (FIFO), DRIVES=SYNCHRONOUS.......................................................................................... 18
LEVEL 0 ...................................................................................................................................................................18
LEVEL 1* .................................................................................................................................................................18
LEVEL 2* .................................................................................................................................................................18
JOBS=ASYNCHRONOUS (FIFO), DRIVES=ASYNCHRONOUS .....................................................................................18
DEFAULT JOB FILE FOLDER (REQUIRED).................................................................................................................. 19

DIRECTOR Series Operator’s Guide
Document Revision: 06/15/05
Page 3
DEFAULT IMAGE FILE FOLDER (REQUIRED)............................................................................................................. 19
DEFAULT LABEL FILE FOLDER (REQUIRED).............................................................................................................19
CREATING NEW PRIVILEGES PROFILE.......................................................................................................................20
EDITING EXISTING PRIVILEGES PROFILE...................................................................................................................21
DELETING EXISTING PRIVILEGES PROFILE................................................................................................................ 22
CREATING NEW USERS ............................................................................................................................................22
EDITING EXISTING USERS......................................................................................................................................... 24
DELETING EXISTING USERS...................................................................................................................................... 24
DEFAULT JOB OPTIONS ............................................................................................................................................24
SYSTEM DRIVES....................................................................................................................................................... 25
TRUSTED DRIVES.....................................................................................................................................................26
CONTROLLING THE DIRECTOR FROM CUSTOM APPLICATIONS .............................................................................27
CREATING DISC LABELS.................................................................................................................................... 28
LABEL EDITOR MENU BAR ...................................................................................................................................... 28
CREATING TEXT....................................................................................................................................................... 30
CHANGING TEXT AND TEXT ATTRIBUTES................................................................................................................30
IMPORTING GRAPHICS..............................................................................................................................................31
RESIZING GRAPHICS................................................................................................................................................. 32
REPOSITIONING TEXT,GRAPHICS AND DATES.......................................................................................................... 33
CENTERING TEXT AND GRAPHICS ............................................................................................................................ 33
DELETING TEXT,GRAPHICS AND DATES .................................................................................................................34
SAVING THE CURRENT DISC LABEL .........................................................................................................................34
OPENING EXISTING DISC LABELS............................................................................................................................. 35
CREATING DISC IMAGES....................................................................................................................................36
DATA DISC IMAGES.................................................................................................................................................. 36
DATA IMAGE EDITOR TOOLBAR...............................................................................................................................37
STATIC AND DYNAMIC CONTENT.............................................................................................................................38
ADDING FILES AND FOLDERS...................................................................................................................................39
REMOVING FILES AND FOLDERS .............................................................................................................................. 39
CREATING NEW FOLDERS ........................................................................................................................................ 39
NAMING AFOLDER..................................................................................................................................................39
SAVING THE CURRENT DISC IMAGE FILE................................................................................................................. 40
LOADING AN EXISTING SCRIPT FILE......................................................................................................................... 44
AUDIO DISC IMAGES ................................................................................................................................................ 44
AUDIO IMAGE TOOLBAR ..........................................................................................................................................45
ADDING TRACKS......................................................................................................................................................46
SELECTING CD CAPACITY........................................................................................................................................46
REMOVING TRACKS .................................................................................................................................................47
EDITING ATRACK.................................................................................................................................................... 47
CHANGING ISRC CODES AND COPY PROHIBIT FLAGS .............................................................................................48
INSERTING,EDITING AND REMOVING SILENCE ........................................................................................................ 49
INSERTING,EDITING AND REMOVING SUB-INDEXES ................................................................................................ 50
SAVING THE CURRENT AUDIO DISC IMAGE .............................................................................................................52
LOADING AN EXISTING AUDIO DISC IMAGE............................................................................................................. 52
CREATING JOBS .................................................................................................................................................... 53
CREATING NEW JOBS...............................................................................................................................................53
JOB MENU BAR........................................................................................................................................................53
GENERAL OPTIONS................................................................................................................................................... 54
JOB ID (REQUIRED).................................................................................................................................................. 55
USER ID (REQUIRED)............................................................................................................................................... 55

DIRECTOR Series Operator’s Guide
Document Revision: 06/15/05
Page 4
PASSWORD (REQUIRED)........................................................................................................................................... 55
IMAGE (NEEDED IF “COPY”OPTION IS CHECKED) .....................................................................................................56
LABEL FILE (OPTIONAL)........................................................................................................................................... 56
SMARTGUARD MEDIA ID......................................................................................................................................... 58
COMMENTS (OPTIONAL) .......................................................................................................................................... 58
QUANTITY (REQUIRED)............................................................................................................................................ 58
PRIORITY (REQUIRED)..............................................................................................................................................58
SAVING THE CURRENT JOB...................................................................................................................................... 60
LOADING AN EXISTING JOB...................................................................................................................................... 60
SUBMITTING JOBS................................................................................................................................................61
SUBMITTING AJOB ..................................................................................................................................................61
THE PRODUCTION PROCESS .....................................................................................................................................62
REMOVING AJOB..................................................................................................................................................... 63
CLEARING THE COMPLETED JOBS LIST....................................................................................................................63
STARTING ANEW JOB..............................................................................................................................................63
ABORTING AJOB .....................................................................................................................................................63
VIEWING LOGS......................................................................................................................................................64
UPDATING JOB RECORDS ......................................................................................................................................... 64
NAVIGATING JOB RECORDS...................................................................................................................................... 64
DELETING INDIVIDUAL JOB RECORDS ......................................................................................................................65
DELETING ALL JOB RECORDS ..................................................................................................................................65
RESUBMITTING JOBS ................................................................................................................................................ 65
DUPLICATING EXISTING CDS ........................................................................................................................... 66
CREATING AN IMAGE FILE ....................................................................................................................................... 66
RECORDING AN IMAGE FILE..................................................................................................................................... 68
VIEWING RESOURCES.........................................................................................................................................69
UPGRADING DIRECTOR SOFTWARE............................................................................................................. 70
OVERVIEW OF THE PROCESS..................................................................................................................................... 70
DOWNLOAD ZIPPED FILES.........................................................................................................................................70
EXTRACT THE ZIPPED FILES...................................................................................................................................... 71
CHANGING COMPUTER NAME......................................................................................................................... 72
DISCONNECTING COMPUTER IN THE INTERNET SERVICE MANAGER (ISM) ..............................................................72
CHANGING THE COMPUTER NAME ........................................................................................................................... 74
CHANGE THE ANONYMOUS ACCOUNT .....................................................................................................................76

DIRECTOR Series Operator’s Guide
Document Revision: 06/15/05
Page 5
Welcome to the Director Duplication Publishing System
Copyright Notice
Copyright ©2003, 2004, 2005 by MF DIGITAL. All rights reserved.
This manual and the accompanying illustrations may not be copied, reproduced,
electronically transmitted, or translated into another language, in whole, or in part,
without the written consent of MF DIGITAL.
MF DIGITAL, CD/DVD-5906ec, Director EC, Scribe EC, Scribe EC Scribe
SA, Scribe PC, Standalone, are trademarks of MF DIGITAL.
Other trademarks referred to are the property of their respective trademark or
registered trademark holders.
Recorder Warranty Policy
Individual recorder manufacturers are responsible for the products they provide. As a convenience,
MF DIGITAL will honor any service issue related to a defective recorder while under its respective
manufacturer’s warranty providing that the recorder has been purchased from MF DIGITAL either directly or
indirectly. MF DIGITAL assumes no responsibility for products NOT purchased through MF DIGITAL.
Piracy
The copying of audio, video, or software without the permission of the copyright holder is illegal.
MF DIGITAL. accepts no responsibility for the copyright use or misuse of this equipment. It is the sole
responsibility of the user to ensure that the legal rights of copyright in duplicating are respected.
Corporate Headquarters:
MF Digital
121 Carolyn Blvd
E. Farmingdale, NY 11735
phone: [phone]
fax: [phone]
e-mail: support@MF Digital.com
website: http://www.mfdigital.com/

DIRECTOR Series Operator’s Guide
Document Revision: 06/15/05
Page 6
About MF Digital
Thank you for purchasing MF Digital’s DIRECTOR duplication publishing
system. MF Digital manufactures a wide variety of software and audio
duplication and production equipment, including manual and fully
automatic CD and DVD duplicators and printers. We hope you will
consider us for all of your production needs.
What To Expect From Your MF Digital DIRECTOR Duplication
Publishing System
Your MF Digital DIRECTOR duplication publishing system is
professionally designed and manufactured to give you years of trouble free
operation. To avoid accidental damage to your new DIRECTOR duplication
publishing system, please read and understand this manual thoroughly
before operating the unit.
About This Manual
This manual is written for both novice and experienced users. Please read
through this Operator’s Guide from beginning to end before using the unit.
Once having read the manual, follow along chapter by chapter. This will
provide the necessary understanding of your new DIRECTOR duplication
publishing system.

DIRECTOR Series Operator’s Guide
Document Revision: 06/15/05
Page 7
Installing the DIRECTOR
Carefully remove the DIRECTOR duplication publishing system from the
shipping container. Inspect the contents and verify them against the packing
slip. Report any errors in shipping as soon as possible.
What’s In The Box
Your DIRECTOR is a complete publishing system containing all necessary
components. The package includes:
•Autoloader mechanism
•PRO Model - External Computer including Keyboard, Video Monitor
and Mouse keyboard
•Director Model - Internal “KVM” PC – you add Keyboard, Video
Monitor and Mouse.
•All connection cords
•Operator’s Guide (on CD)
•Windows XP Pro license pack
•MF Digital Product & Warranty Registration card
Packing Materials
Please retain the original box and packaging in the event that the unit
requires future servicing. This will help to reduce the possibility of damage
occurring in transit.

DIRECTOR Series Operator’s Guide
Document Revision: 06/15/05
Page 8
The Best Place To Put The DIRECTOR
The best operating location for the DIRECTOR duplication publishing
system is in a climate controlled area, free of dirt, dust, humidity, excessive
heat, and electronic or electromagnetic interference. Room temperature
should be between 65 and 75 degrees Fahrenheit, or between 18 and 23
degrees Celsius. Place the DIRECTOR on a solid, steady work surface and
allow sufficient room for all incidental work materials. Provide at least six
inches of clearance on all sides of the unit for ventilation.
Safety Precautions
The system is shipped with a three-prong power connector and must be
used with a properly grounded AC receptacle. DO NOT try to defeat the
third “ground” prong. All computer peripherals must be properly grounded
and the DIRECTOR EC is no exception. The use of a power conditioner
such as an Uninterruptible Power Supply (UPS), or a surge protector is
highly recommended. At the very least you should consider connecting the
PC portion of the DIRECTOR to a UPS. The minimum required size is
500VA.
Repairs or alterations should only be attempted by authorized factory
trained technicians. MF Digital reserves the right to void the warranty if
unauthorized service is performed.

DIRECTOR Series Operator’s Guide
Document Revision: 06/15/05
Page 9
Removing Packing Restraints
The DIRECTOR ships with a picker arm restraint to reduce the possibility
of damage in transit. This restraint must be removed before operation or
power-on. Remove the foam block above the transfer arm. Save the foam
block, as you will need to return it to its place if you need to transport the
unit in the future.
Installing The Monitor, Keyboard And Mouse
Before operating the DIRECTOR, the monitor, keyboard and mouse must
be attached.
Connecting The Monitor
•Place the monitor on either side of the DIRECTOR unit.
•Make sure the monitor power switch is set to the off position.
•Connect one end of the power cord to the VAC Out on the monitor and
the other to the wall power outlet.
•Connect the High Density DB15 male connector of the video cable to
the High Density DB15 female Video In port on the back of the host
computer.
Connecting The Mouse And Keyboard
•Connect the PS/2 male connector of the mouse cord to the PS/2 female
Mouse In port on the back of the DIRECTOR.
•Connect the PS/2 male connector of the keyboard cord to the PS/2
female Keyboard In port on the back of the DIRECTOR.

DIRECTOR Series Operator’s Guide
Document Revision: 06/15/05
Page 10
Installing The Network Cable
In addition to operating as a standalone duplicator the DIRECTOR EC can
be connected to a network to receive files for pre-mastering or even be
remotely controlled by use of the DIRECTOR’s advanced Application
Program Interface (SmartAPI). The unit comes equipped from the factory
with a 3COM 10/100BaseT Ethernet card for network attachment.
Connecting The Network Cable
•Connect a suitable patch cord to the RJ45 network port on the back of
the DIRECTOR unit. A Category 3 or better cable should be used for
10Base-T and Category 5 for 100Base-T network connection.
While networks are commonplace, their connection and interconnection
require specific expertise far beyond the scope of this manual. For our
purposes here, we will assume you either have expertise with networking
computers, or had your unit professionally installed by MF Digital.
Note:

DIRECTOR Series Operator’s Guide
Document Revision: 06/15/05
Page 11
Installing Firewire Cables -- Director PRO ONLY !!
The following illustrations show firewire installation on the Director. Please connect the
firewire cables as illustrated below.
Director PRO ONLY
Firewire Connection on back of PC

DIRECTOR Series Operator’s Guide
Document Revision: 06/15/05
Page 12
Starting the DIRECTOR For The First Time
Before DVD / CD creation or duplication can begin it is necessary to
review a few details.
Power Connection And Settings
•Make sure the DIRECTOR power switch is set to the off position. Also,
set the PC switch to off or “0”.
•Verify that the voltage selector switch on the back of the unit is set
correctly. The DIRECTOR supports both 115 VAC and 230 VAC at 50
~ 60 Hz. Please confirm that the correct voltage (115 VAC for North
America) has been selected.
•Plug one end of the supplied power cord into the receptacle at the rear of
the unit and the other end into the wall or UPS power outlet.

CAUTION
Always use properly grounded receptacles, or severe damage to
your system may result. The use of a surge protector or
Uninterruptible Power Supply (UPS) is highly recommended.
Both DIRECTOR models use Microsoft’s Windows XP Professional
for their operating system. To get the most out of the DIRECTOR it is
recommended that users supplement this manual with a Windows XP
Professional guide.
Note:

DIRECTOR Series Operator’s Guide
Document Revision: 06/15/05
Page 13
Starting Up
•Flip the DIRECTOR power switch to the “on” position.
•Flip the host computer’s power switch to the “on” position.
•Switch on the power to the printer.
•Wait a minute or two while the system starts up. A series of diagnostic
information will be displayed and once complete the unit will display
the Begin Logon dialog box.
•Enter “MF Digital” in lowercase letters for the password. Please note
that the password is case sensitive.
•Press the ENTER key. The screen will now display the DIRECTOR
desktop screen.

DIRECTOR Series Operator’s Guide
Document Revision: 06/15/05
Page 14
Application Startup
The DIRECTOR is a state-of-the-art DVD / CD duplication publishing
system and duplicator. It is designed to create, duplicate and verify most
standard compact disc formats. This startup section will guide you through
starting and configuring the DIRECTOR application.
Starting the DIRECTOR Application
To start the DIRECTOR application the steps are as follows:
•From the DIRECTOR desktop, double click the “DIRECTOR” icon on
the Windows desktop. The DIRECTOR application screen will now be
displayed:
•Place as many blank discs as required onto the input spindle.
DIRECTOR Application Layout
The DIRECTOR application is organized into a sequence of eight pages
accessible by tabs at the top of the screen (System Status, Create Job, Data
Image Editor, Audio Image Editor, Label Editor, Resources Info, System
Setup, System Log). By completing information on these cards you control
the actions of the DIRECTOR to create, duplicate and verify DVD / CDs as
well as print disc labels.

DIRECTOR Series Operator’s Guide
Document Revision: 06/15/05
Page 15
Tabs:
System Status Displays the status of jobs after they have been
submitted for production.
Create Job Brings together the data or audio contents and label
components of a DVD / CD so it can be produced.
Data Image
Editor Specifies the contents of a data DVD / CD to be recorded.
Audio Image
Editor Specifies the contents of an audio CD to be recorded.
Label Editor Creates labels to be printed on the surface of discs.
Resources Info Displays the hardware elements connected to the
DIRECTOR.
System Setup Defines operating settings and user privileges.
System Log Displays the database of information maintained on all
jobs.
DIRECTOR Application Configuration
Before creating or duplicating a disc the DIRECTOR application must first
be configured. The System Setup tab is used to establish a number of
important settings including basic operation parameters as well as the
authorized users and privileges they have using the DIRECTOR.
To begin or modify an existing setup of the DIRECTOR :
•Click the System Setup tab. The screen will now display:
Note: Apply button must be clicked in order for any changes to take effect. Except
for modification of users and privileges.

DIRECTOR Series Operator’s Guide
Document Revision: 06/15/05
Page 16
The System Setup tab is divided into a number of information fields that
must be completed.
Printer Driver (Required)
The Printer Driver pull-down is used to indicate to the DIRECTOR the
type of printer that is installed.
•Click the Printer Driver pull down and select your printer Ex: “MF
Digital Spectrum”.
Operator’s Email Address (Optional)
The OPERATOR’S EMAIL ADDRESS field is a user defined email
address to which a network attached DIRECTOR will send a message when
the unit requires attention (such as an empty input spindle, etc.). The email
feature requires the presence of a POP3 or IMAP server on the network and
that an email client account be created for use by the DIRECTOR EC.
DIRECTOR sends email via MAPI hence you must first setup a MAPI
email client on the DIRECTOR. Make sure you set this client to be used
from MAPI based applications.
Note:

DIRECTOR Series Operator’s Guide
Document Revision: 06/15/05
Page 17
•Click the Operator’s E-mail Address field and enter an email address.
Leave the field blank if the DIRECTOR is not attached to a network or
if you do not want to receive unit attention messages.
Recording Speed
The Recording Speed pull-down allows you to set the recording speed as
determined by the capabilities of the recorders installed in the DIRECTOR
EC.
•Click the Recording Speed pull down and select the desired recording
speed “maximum speed”, or “4x, 8x, 12x, 16x, 20x, 24x, 32x, or 48x
speed”.
•Click on “Apply” to activate the changes.
Asynchronous Mode (Required)
The Asynchronous Mode pull-down is used to instruct the DIRECTOR EC
how to process jobs. This affects both how jobs are handled and how the
drives operate. Jobs and drives can run either synchronously or
asynchronously. In the table below you will find each mode detailed. Let’s
define the basic modes first:
Jobs=Synchronous / Asynchronous
When jobs are Synchronous, they are completed in the order in which
they were submitted. Take for example two jobs submitted for one copy
each. The first job is of a 650MB master while the second job is only
10MB. While the second job submitted will be completed prior to the
first job, it will not be outputted to the accept spindle until the second
job has been completed. When jobs are Asynchronous they will be
outputted to the accept spindle as they are completed.
Drives=Synchronous /Asynchronous
Drives can also run either synchronously or asynchronously. In
synchronous mode, all the drives in use for a given job, run in tandem or
parallel to one another. In asynchronous mode, all the drives in use for a
given job, operate independently of each other. For example if you
submit a job for three copies and the drives are operating synchronously,
the copying process will not begin until all drives become ready. On the
other hand, if the same job were submitted with the drives operating
asynchronously, each drive would begin to write as soon as it becomes
ready, independently of any other drives which may also be in use for

DIRECTOR Series Operator’s Guide
Document Revision: 06/15/05
Page 18
this particular job. Asynchronous mode is more demanding of system
resources.
The modes of operation are:
Mode Description
Disabled Jobs=Synchronous (FIFO), Drives=Synchronous
When the setting is “disabled”, jobs are processed on a first in/first out
(FIFO) basis such that they will be kept together when placed on the
output spindle. For example, let us say two jobs of one piece each are
submitted. Job 1 is a 650 MB disc and Job 2 is a 10 MB disc. Even
though Job 2 was submitted last, it will completed before Job 1 but it will
NOT be outputted to the accept spindle until Job 1 is done.
Level 0 Jobs=Asynchronous, Drives=Synchronous (Default)
When the setting is “level 0” jobs are still started on a first in / first out
basis, but completed jobs will be outputted when they are done and
therefore discs will be mixed together on the output spindle. For
example, let us say two jobs of two pieces each are submitted. Job 1 is a
650 MB disc and Job 2 is a 10 MB disc. Even though Job 2 was
submitted last, it will completed before Job 1 but unlike the DIASBLED
mode, it will not be held but rather immediately outputted to the accept
spindle when it is done. In processing the respective jobs, the two drives
in use for each job will function in tandem such that they will not begin
to write until both drives have become ready.
Level 1* Jobs=Synchronous (FIFO), Drives=Asynchronous
When the setting is “Level 1”, jobs are processed on a first in/first out
(FIFO) basis such that they will be kept together when placed on the
output spindle. For example, let us say two jobs of two pieces each are
submitted. Job 1 is a 650 MB disc and Job 2 is a 10 MB disc. Even
though Job 2 was submitted last, it will completed before Job 1 but it will
NOT be outputted to the accept spindle until Job 1 is done. In processing
the respective jobs, the two drives in use for each job will function
independently of one another and begin to write as soon as they become
ready.
Level 2* Jobs=Asynchronous (FIFO), Drives=Asynchronous
When the setting is “level 2” jobs are still started on a first in / first out
basis but completed jobs will be outputted when they are done. For
example, let us say two jobs of two pieces each are submitted. Job 1 is a
650 MB disc and Job 2 is a 10 MB disc. Even though Job 2 was
submitted last, it will completed before Job 1 but unlike the DIASBLED
mode, it will not be held but rather immediately outputted to the accept
spindle when it is done. In processing the respective jobs, the two drives
in use for each job will function independently of one another and begin
to write as soon as they become ready. In this mode, disc placement on
output spindle will be scattered.

DIRECTOR Series Operator’s Guide
Document Revision: 06/15/05
Page 19
•Click the ASYNCHRONOUS MODE pull down and select the desired
“disabled” or “level O” setting (level 1 and level 2 not used).
Default Job File Folder (Required)
The DEFAULT JOB FILE FOLDER field is used to specify the default
location where job files (*.JOB) will be saved. The factory setting
(C:\CDDIRECTOR\Jobs\) should be sufficient for most uses. To change the
default setting:
•Click the Browse button below the DEFAULT JOB FILE FOLDER
field.
•Select the volume and Director EC where you wish to save job files.
•Click the OK button.
Default Image File Folder (Required)
The DEFAULT IMAGE FILE FOLDER field is used to specify the default
location where disc image script (*.ISC) will be saved. The factory setting
(C:\CDDIRECTOR\Images\) should be sufficient for most uses. To change
the default setting:
•Click the Browse button below the DEFAULT IMAGE FILE FOLDER
field.
•Select the volume and Director where you wish to save disc image files.
•Click the OK button.
Default Label File Folder (Required)
The DEFAULT LABEL FILE FOLDER field is used to specify the default
location where disc label files (*.LBL) will be saved. The factory setting
(C:\CDDIRECTOR\Labels\) should be sufficient for most uses. To change
the default setting:
•Click the Browse button below the DEFAULT LABEL FILE FOLDER
field.
•Select the volume and Director where you wish to save disc label files.
•Click the OK button.